- Joined
- Jan 2, 2017
- Messages
- 8
- Motherboard
- Asus ROG Strix Z370-G Gaming (Wi-Fi AC)
- CPU
- i7-8700k
- Graphics
- Vega 64
- Mac
Is there any way to tell if the kext is being applied correctly? No matter what settings I choose, it seems like nothing changes after restarting. I am trying to lower the clock speed to stop coil whine on a Vega 64 Nitro+. The most minor screen updates, such as hovering over a browser tab, cause a buzzing sound.
I've tried putting the generated kext in
I've rebooted around 15 times trying to figure this out. Two of those times the clock speed was stuck at 1.59ghz, according to iStat Menus, even though that is not what I set it to. Those two times, the coil whine seemed to be gone, but any other reboot, even with nothing changed, the coil whine returns and the clock speed is reported as only around 30-50MHz.
I tried various fan settings as well just to see if I could get any noticeable change, but again nothing seems to change. It seems to be stuck around 800 RPM from
Everything seems to work normally in Windows.
Does anyone have any suggestions on how to debug this?
Could someone with a Sapphire Vega 64 Nitro+ (non LE) share their kext?
I've tried putting the generated kext in
/EFI/CLOVER/kexts/Other
and /EFI/CLOVER/kext
on different reboots, but neither seem to work.I've rebooted around 15 times trying to figure this out. Two of those times the clock speed was stuck at 1.59ghz, according to iStat Menus, even though that is not what I set it to. Those two times, the coil whine seemed to be gone, but any other reboot, even with nothing changed, the coil whine returns and the clock speed is reported as only around 30-50MHz.
I tried various fan settings as well just to see if I could get any noticeable change, but again nothing seems to change. It seems to be stuck around 800 RPM from
ioreg -l |grep \"PerformanceStatistics\" | cut -d '{' -f 2 | tr '|' ',' | tr -d '}' | tr ',' '\n'|grep 'Temp\|Fan'
. This keeps the GPU at around 28-30C when idle.Everything seems to work normally in Windows.
Does anyone have any suggestions on how to debug this?
Could someone with a Sapphire Vega 64 Nitro+ (non LE) share their kext?