jaymonkey
Moderator
- Joined
- Aug 27, 2011
- Messages
- 4,080
- Motherboard
- GB Z490 Vision D
- CPU
- i9-10850K OC @ 5.2 GHz
- Graphics
- RX6800-XT+UHD630
- Mac
- Mobile Phone
hello to all,
i have not got an ethernet card in my notebook that works, how do i get the device to show up under ethernet. i only have wifi perfekt working.
@lil007,
First you need to identify the laptop's ethernet card, use DPCI manager to identify the device (click on the 'PCI List' tab), then try and find a kext device driver that is compatible, Multibeast supports most of the popular ones if it's not supported by multibeast then you'll have to try and find kext that will work, you could try here - use Kext utility to install the correct one.
Once you have the kext driver loaded ensure that it is flagged as 'Built-in' in the 'Status' page of DPCI Manager - See Part 1, Step 2 of the guide for further info on this ...
If you are getting different values for ROM and MLB on each boot then you'll need to address this issue, Part-1 Step 5d of the guide explains the issue in detail with suggestions on how to resolve it.
Hope this helps
Cheers
Jay