- Joined
- Nov 1, 2014
- Messages
- 204
- Motherboard
- Asus Prime X299-Deluxe II
- CPU
- i9-9980XE
- Graphics
- RX 6900 XT
- Mac
- Mobile Phone
I'm getting stuck at boot after
End Randomseed
+++++++++++++++++++++++++++++++++++++++++++++++++++++++++
My system specs are:
evga micro 2 mobo
i7-6800k
nvidia gtx1070
I am using the prebuilt efi directory specified in the main post.
Anyone have any suggestions?
Thanks!
I implemented everything from your new Guide and modified it for my system, started from Scratch and installed 10.13.5. Everything is working (including XCPM).
But my OC is not working properly. My Base Freq is 3,6 GHZ with Turbo 3,8 GHZ. I OCd to 4,2 GHZ.
When i start hackintosh, hardware monitor is showing 4,2 GHZ on each core for the first 5 secs , but then its "throttling" to 3,8GHZ and 4,0GHZ on Core 5. XCPM is working though. Intel Power Gadget same behaviour.
Do you have an idea?
And do you use the two xcpm Kernel patches of my config.plist? If so, it MUST work! Try to identify your problem.Yes, EIST is disabled. I OCd Turbo Boost Mode to 42x100 for each core...