How to extend the iMac Pro to X99 [Successful Build/Extended Guide]

[ICEVISION]

Finally coming back to see performance!

I wanted to say a huge thank you kgp
Really, during this time you saved me thousands of dollars ... and I appreciate it very much!

 

[bmp14]

I'm getting stuck at boot after

End Randomseed
+++++++++++++++++++++++++++++++++++++++++++++++++++++++++

My system specs are:
evga micro 2 mobo
i7-6800k
nvidia gtx1070

I am using the prebuilt efi directory specified in the main post.

Anyone have any suggestions?

Thanks!

 

[kgp]

I'm getting stuck at boot after

End Randomseed
+++++++++++++++++++++++++++++++++++++++++++++++++++++++++

My system specs are:
evga micro 2 mobo
i7-6800k
nvidia gtx1070

I am using the prebuilt efi directory specified in the main post.

Anyone have any suggestions?

Thanks!

1.) Please implement your system specs in either your profile and signature
2.) Please continue working on implementing my system configuration

 

[yannh1992]

I implemented everything from your new Guide and modified it for my system, started from Scratch and installed 10.13.5. Everything is working (including XCPM).

But my OC is not working properly. My Base Freq is 3,6 GHZ with Turbo 3,8 GHZ. I OCd to 4,2 GHZ.

When i start hackintosh, hardware monitor is showing 4,2 GHZ on each core for the first 5 secs , but then its "throttling" to 3,8GHZ and 4,0GHZ on Core 5. XCPM is working though. Intel Power Gadget same behaviour.

Do you have an idea?

 

[kgp]

I implemented everything from your new Guide and modified it for my system, started from Scratch and installed 10.13.5. Everything is working (including XCPM).

But my OC is not working properly. My Base Freq is 3,6 GHZ with Turbo 3,8 GHZ. I OCd to 4,2 GHZ.

When i start hackintosh, hardware monitor is showing 4,2 GHZ on each core for the first 5 secs , but then its "throttling" to 3,8GHZ and 4,0GHZ on Core 5. XCPM is working though. Intel Power Gadget same behaviour.

Do you have an idea?

What are you talking about?

Show IPG figures for CPU Idle and Cinebench CPU max load...

Thanks

 

[yannh1992]

 

[kgp]

View attachment 334807

Which looks totally fine...
Wait.. you have no OC! Did you disable EIST in BIOS?? And do you use the two xcpm Kernel patches of my config.plist?

 

[yannh1992]

Yes, EIST is disabled. I OCd Turbo Boost Mode to 42x100 for each core...

 

[kgp]

Yes, EIST is disabled. I OCd Turbo Boost Mode to 42x100 for each core...

And do you use the two xcpm Kernel patches of my config.plist? If so, it MUST work! Try to identify your problem.

Good luck

 

[yannh1992]

Yes i do.

Edit: I activated XMP and overclocked per BLCK. Its working now. Thanks for all