Contribute
Register

How to extend the iMac Pro to X99 [Successful Build/Extended Guide]

Status
Not open for further replies.
@nmano,

SSDT attached to post #1688. :thumbup:

For TB, you can adopt and implement my TB-SSDT from my Skylake-X/X299 thread or use your own.
 
kgp said:
@nmano,

SSDT attached to post #1688. :thumbup:

For TB, you can adopt and implement my TB-SSDT from my Skylake-X/X299 thread or use your own.
Click to expand...
Can I see your X99 original DSDT
Because your ASUS board make sleep with THB card.
 
nmano said:
Can I see your X99 original DSDT
Because your ASUS board make sleep with THB card.
Click to expand...

I do not have the TBEX 3 yet installed on my X99 system. I don’t know if it will sleep with TB installed. TB BIOS settings are quite different from X299.

Give me some time. I will figure it out for you.

Will start implementing right now TBEX 3 on my x99 system.

But it is the TBEX 3 from my ASUS Prime X299 Deluxe. I don’t know if it will work with the ASUS X99-A II.
 
:headbang:;):lol:Who wants to kiss me for this?:lol:;):headbang:

Screen Shot 2018-05-29 at 00.36.37.png


Screen Shot 2018-05-29 at 00.36.52.png


Screen Shot 2018-05-29 at 00.29.43.png


Screen Shot 2018-05-29 at 00.31.00.png


Screen Shot 2018-05-29 at 00.44.29.png


Screen Shot 2018-05-29 at 00.41.18.png


Code: 
AppleIntelInfo.kext v2.9 Copyright © 2012-2017 Pike R. Alpha. All rights reserved.

Settings:
------------------------------------------
logMSRs..................................: 1
logIGPU..................................: 0
logCStates...............................: 1
logIPGStyle..............................: 1
InitialTSC...............................: 0xc43970e860 (28 MHz)
MWAIT C-States...........................: 8480

Processor Brandstring....................: Intel(R) Core(TM) i7-6950X CPU @ 3.00GHz

Processor Signature..................... : 0x406F1
------------------------------------------
- Family............................... : 6
- Stepping............................. : 1
- Model................................ : 0x4F (79)

Model Specific Registers (MSRs)
------------------------------------------

MSR_IA32_PLATFORM_ID.............(0x17)  : 0x8000000000000
------------------------------------------
- Processor Flags...................... : 2

MSR_CORE_THREAD_COUNT............(0x35)  : 0xA0014
------------------------------------------
- Core Count........................... : 10
- Thread Count......................... : 20

MSR_PLATFORM_INFO................(0xCE)  : 0x20080C3BF3811E00
------------------------------------------
- Maximum Non-Turbo Ratio.............. : 0x1E (3000 MHz)
- Ratio Limit for Turbo Mode........... : 1 (programmable)
- TDP Limit for Turbo Mode............. : 1 (programmable)
- Low Power Mode Support............... : 1 (LPM supported)
- Number of ConfigTDP Levels........... : 1 (additional TDP level(s) available)
- Maximum Efficiency Ratio............. : 12
- Minimum Operating Ratio.............. : 8

MSR_PMG_CST_CONFIG_CONTROL.......(0xE2)  : 0x1E000005
------------------------------------------
- I/O MWAIT Redirection Enable......... : 0 (not enabled)
- CFG Lock............................. : 0 (MSR not locked)
- C3 State Auto Demotion............... : 1 (enabled)
- C1 State Auto Demotion............... : 1 (enabled)
- C3 State Undemotion.................. : 1 (enabled)
- C1 State Undemotion.................. : 1 (enabled)
- Package C-State Auto Demotion........ : 0 (disabled/unsupported)
- Package C-State Undemotion........... : 0 (disabled/unsupported)

MSR_PMG_IO_CAPTURE_BASE..........(0xE4)  : 0x10414
------------------------------------------
- LVL_2 Base Address................... : 0x414
- C-state Range........................ : 1 (C-States not included, I/O MWAIT redirection not enabled)

IA32_MPERF.......................(0xE7)  : 0x982A5FC00
IA32_APERF.......................(0xE8)  : 0xC38DDBABB
MSR_0x150........................(0x150) : 0x0

MSR_FLEX_RATIO...................(0x194) : 0xE0000
------------------------------------------

MSR_IA32_PERF_STATUS.............(0x198) : 0x194F00000C00
------------------------------------------
- Current Performance State Value...... : 0xC00 (1200 MHz)

MSR_IA32_PERF_CONTROL............(0x199) : 0xFF00
------------------------------------------
- Target performance State Value....... : 0xFF00 (25500 MHz)
- Intel Dynamic Acceleration........... : 0 (IDA engaged)

IA32_CLOCK_MODULATION............(0x19A) : 0x0

IA32_THERM_INTERRUPT.............(0x19B) : 0x0

IA32_THERM_STATUS................(0x19C) : 0x88420000
------------------------------------------
- Thermal Status....................... : 0
- Thermal Log.......................... : 0
- PROCHOT # or FORCEPR# event.......... : 0
- PROCHOT # or FORCEPR# log............ : 0
- Critical Temperature Status.......... : 0
- Critical Temperature log............. : 0
- Thermal Threshold #1 Status.......... : 0
- Thermal Threshold #1 log............. : 0
- Thermal Threshold #2 Status.......... : 0
- Thermal Threshold #2 log............. : 0
- Power Limitation Status.............. : 0
- Power Limitation log................. : 0
- Current Limit Status................. : 0
- Current Limit log.................... : 0
- Cross Domain Limit Status............ : 0
- Cross Domain Limit log............... : 0
- Digital Readout...................... : 66
- Resolution in Degrees Celsius........ : 1
- Reading Valid........................ : 1 (valid)

MSR_THERM2_CTL...................(0x19D) : 0x0

IA32_MISC_ENABLES................(0x1A0) : 0x850089
------------------------------------------
- Fast-Strings......................... : 1 (enabled)
- FOPCODE compatibility mode Enable.... : 0
- Automatic Thermal Control Circuit.... : 1 (enabled)
- Split-lock Disable................... : 0
- Performance Monitoring............... : 1 (available)
- Bus Lock On Cache Line Splits Disable : 0
- Hardware prefetch Disable............ : 0
- Processor Event Based Sampling....... : 0 (PEBS supported)
- GV1/2 legacy Enable.................. : 0
- Enhanced Intel SpeedStep Technology.. : 1 (enabled)
- MONITOR FSM.......................... : 1 (MONITOR/MWAIT supported)
- Adjacent sector prefetch Disable..... : 0
- CFG Lock............................. : 0 (MSR not locked)
- xTPR Message Disable................. : 1 (disabled)

MSR_TEMPERATURE_TARGET...........(0x1A2) : 0x640A00
------------------------------------------
- Turbo Attenuation Units.............. : 0
- Temperature Target................... : 100
- TCC Activation Offset................ : 0

MSR_MISC_PWR_MGMT................(0x1AA) : 0x402000
------------------------------------------
- EIST Hardware Coordination........... : 0 (hardware coordination enabled)
- Energy/Performance Bias support...... : 1
- Energy/Performance Bias.............. : 0 (disabled/MSR not visible to software)
- Thermal Interrupt Coordination Enable : 1 (thermal interrupt routed to all cores)
- SpeedShift Technology Enable......... : 0 (disabled)
- SpeedShift Interrupt Coordination.... : 0 (disabled)
- SpeedShift Energy Efficient Perf..... : 0 (disabled)
- SpeedShift Technology Setup for HWP.. : No (not setup for HWP)

MSR_TURBO_RATIO_LIMIT............(0x1AD) : 0x2B2B2B2B2B2B2B2B
------------------------------------------
- Maximum Ratio Limit for C01.......... : 2B (4300 MHz)
- Maximum Ratio Limit for C02.......... : 2B (4300 MHz)
- Maximum Ratio Limit for C03.......... : 2B (4300 MHz)
- Maximum Ratio Limit for C04.......... : 2B (4300 MHz)
- Maximum Ratio Limit for C05.......... : 2B (4300 MHz)
- Maximum Ratio Limit for C06.......... : 2B (4300 MHz)
- Maximum Ratio Limit for C07.......... : 2B (4300 MHz)
- Maximum Ratio Limit for C08.......... : 2B (4300 MHz)

MSR_TURBO_RATIO_LIMIT1...........(0x1AE) : 0x2222222222222B2B
------------------------------------------
- Maximum Ratio Limit for C09.......... : 2B (4300 MHz)
- Maximum Ratio Limit for C10.......... : 2B (4300 MHz)

IA32_ENERGY_PERF_BIAS............(0x1B0) : 0x5
------------------------------------------
- Power Policy Preference...............: 5 (balanced performance and energy saving)

MSR_POWER_CTL....................(0x1FC) : 0x2904005B
------------------------------------------
- Bi-Directional Processor Hot..........: 1 (enabled)
- C1E Enable............................: 1 (enabled)

MSR_RAPL_POWER_UNIT..............(0x606) : 0xA0E03
------------------------------------------
- Power Units.......................... : 3 (1/8 Watt)
- Energy Status Units.................. : 14 (61 micro-Joules)
- Time Units .......................... : 10 (976.6 micro-Seconds)

MSR_PKG_POWER_LIMIT..............(0x610) : 0x7FFF80015FFF8
------------------------------------------
- Package Power Limit #1............... : 4095 Watt
- Enable Power Limit #1................ : 1 (enabled)
- Package Clamping Limitation #1....... : 1 (allow going below OS-requested P/T state during Time Window for Power Limit #1)
- Time Window for Power Limit #1....... : 10 (2560 milli-Seconds)
- Package Power Limit #2............... : 4095 Watt
- Enable Power Limit #2................ : 1 (enabled)
- Package Clamping Limitation #2....... : 1 (allow going below OS-requested P/T state setting Time Window for Power Limit #2)
- Time Window for Power Limit #2....... : 3 (20 milli-Seconds)
- Lock................................. : 0 (MSR not locked)

MSR_PKG_ENERGY_STATUS............(0x611) : 0x6150A37
------------------------------------------
- Total Energy Consumed................ : 6228 Joules (Watt = Joules / seconds)

MSR_PKGC3_IRTL...................(0x60a) : 0x0
MSR_PKGC6_IRTL...................(0x60b) : 0x0
MSR_PKGC7_IRTL...................(0x60c) : 0x0
MSR_PKG_C2_RESIDENCY.............(0x60d) : 0x8A2A86A06
MSR_PKG_C3_RESIDENCY.............(0x3f8) : 0x16DE2AE
MSR_PKG_C2_RESIDENCY.............(0x60d) : 0x8A2A86A06
MSR_PKG_C3_RESIDENCY.............(0x3f8) : 0x16DE2AE
MSR_PKG_C6_RESIDENCY.............(0x3f9) : 0x18AE80A5F4
MSR_PKG_C7_RESIDENCY.............(0x3fa) : 0x0

IA32_TSC_DEADLINE................(0x6E0) : 0xC43E467AA7

CPU Ratio Info:
------------------------------------------
Base Clock Frequency (BLCK)............. : 100 MHz
Maximum Efficiency Ratio/Frequency.......: 12 (1200 MHz)
Maximum non-Turbo Ratio/Frequency........: 30 (3000 MHz)
Maximum Turbo Ratio/Frequency............: 43 (4300 MHz)
P-State ratio * 100 = Frequency in MHz
------------------------------------------
CPU P-States [ 32 (43) ]
CPU C3-Cores [ 0 2 4 8 10 12 14 16 19 ]
CPU C6-Cores [ 1 3 5 7 9 11 13 15 17 19 ]
CPU P-States [ 32 39 (43) ]
CPU C3-Cores [ 0 2 4 5 8 10 12 14 16 18 19 ]
CPU C6-Cores [ 0 1 3 5 6 7 9 11 12 13 15 17 19 ]
CPU C6-Cores [ 0 1 3 5 6 7 9 11 12 13 15 16 17 19 ]
CPU P-States [ (12) 32 39 43 ]
CPU C3-Cores [ 0 1 2 4 5 8 10 12 14 16 18 19 ]
CPU C6-Cores [ 0 1 3 5 6 7 9 11 12 13 14 15 16 17 19 ]
CPU C3-Cores [ 0 1 2 4 5 8 9 10 12 14 16 18 19 ]
CPU C6-Cores [ 0 1 3 5 6 7 8 9 11 12 13 14 15 16 17 19 ]
CPU C3-Cores [ 0 1 2 4 5 8 9 10 12 13 14 16 18 19 ]
CPU P-States [ 12 32 37 39 (43) ]
CPU P-States [ (12) 32 37 39 41 43 ]
CPU C6-Cores [ 0 1 2 3 5 6 7 8 9 11 12 13 14 15 16 17 19 ]
CPU P-States [ 12 32 37 39 40 41 (43) ]
CPU C3-Cores [ 0 1 2 3 4 5 8 9 10 12 13 14 16 18 19 ]
CPU P-States [ (12) 32 37 38 39 40 41 43 ]
CPU P-States [ 12 32 36 37 38 39 40 41 (43) ]
CPU P-States [ 12 32 36 37 38 39 40 41 42 (43) ]
CPU C6-Cores [ 0 1 2 3 4 5 6 7 8 9 11 12 13 14 15 16 17 19 ]
CPU P-States [ 12 32 35 36 37 38 39 40 41 42 (43) ]
CPU C6-Cores [ 0 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 19 ]
CPU C3-Cores [ 0 1 2 3 4 5 8 9 10 11 12 13 14 16 18 19 ]
CPU C6-Cores [ 0 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 ]
CPU C3-Cores [ 0 1 2 3 4 5 8 9 10 11 12 13 14 16 17 18 19 ]
CPU P-States [ 12 29 32 35 36 37 38 39 40 41 42 (43) ]
CPU C3-Cores [ 0 1 2 3 4 5 8 9 10 11 12 13 14 15 16 17 18 19 ]
CPU P-States [ 12 29 32 34 35 36 37 38 39 40 41 42 (43) ]
CPU P-States [ (12) 29 32 33 34 35 36 37 38 39 40 41 42 43 ]
CPU P-States [ 12 29 30 32 33 34 35 36 37 38 39 40 41 42 (43) ]
CPU C3-Cores [ 0 1 2 3 4 5 6 8 9 10 11 12 13 14 15 16 17 18 19 ]
CPU P-States [ (12) 28 29 30 32 33 34 35 36 37 38 39 40 41 42 43 ]
CPU C3-Cores [ 0 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 ]
CPU P-States [ 12 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 (43) ]

  • Broadwell-E OC problem solved
  • No PMDrvr.kext
  • Full Sleep/Wake Functionality

kgp.png
 
Last edited:
kgp said:
:headbang:;):lol:Who wants to kiss me for this?:lol:;):headbang:

View attachment 333328

View attachment 333329

View attachment 333323

View attachment 333324

View attachment 333325

View attachment 333326

Code: 
AppleIntelInfo.kext v2.9 Copyright © 2012-2017 Pike R. Alpha. All rights reserved.

Settings:
------------------------------------------
logMSRs..................................: 1
logIGPU..................................: 0
logCStates...............................: 1
logIPGStyle..............................: 1
InitialTSC...............................: 0xc43970e860 (28 MHz)
MWAIT C-States...........................: 8480

Processor Brandstring....................: Intel(R) Core(TM) i7-6950X CPU @ 3.00GHz

Processor Signature..................... : 0x406F1
------------------------------------------
- Family............................... : 6
- Stepping............................. : 1
- Model................................ : 0x4F (79)

Model Specific Registers (MSRs)
------------------------------------------

MSR_IA32_PLATFORM_ID.............(0x17)  : 0x8000000000000
------------------------------------------
- Processor Flags...................... : 2

MSR_CORE_THREAD_COUNT............(0x35)  : 0xA0014
------------------------------------------
- Core Count........................... : 10
- Thread Count......................... : 20

MSR_PLATFORM_INFO................(0xCE)  : 0x20080C3BF3811E00
------------------------------------------
- Maximum Non-Turbo Ratio.............. : 0x1E (3000 MHz)
- Ratio Limit for Turbo Mode........... : 1 (programmable)
- TDP Limit for Turbo Mode............. : 1 (programmable)
- Low Power Mode Support............... : 1 (LPM supported)
- Number of ConfigTDP Levels........... : 1 (additional TDP level(s) available)
- Maximum Efficiency Ratio............. : 12
- Minimum Operating Ratio.............. : 8

MSR_PMG_CST_CONFIG_CONTROL.......(0xE2)  : 0x1E000005
------------------------------------------
- I/O MWAIT Redirection Enable......... : 0 (not enabled)
- CFG Lock............................. : 0 (MSR not locked)
- C3 State Auto Demotion............... : 1 (enabled)
- C1 State Auto Demotion............... : 1 (enabled)
- C3 State Undemotion.................. : 1 (enabled)
- C1 State Undemotion.................. : 1 (enabled)
- Package C-State Auto Demotion........ : 0 (disabled/unsupported)
- Package C-State Undemotion........... : 0 (disabled/unsupported)

MSR_PMG_IO_CAPTURE_BASE..........(0xE4)  : 0x10414
------------------------------------------
- LVL_2 Base Address................... : 0x414
- C-state Range........................ : 1 (C-States not included, I/O MWAIT redirection not enabled)

IA32_MPERF.......................(0xE7)  : 0x982A5FC00
IA32_APERF.......................(0xE8)  : 0xC38DDBABB
MSR_0x150........................(0x150) : 0x0

MSR_FLEX_RATIO...................(0x194) : 0xE0000
------------------------------------------

MSR_IA32_PERF_STATUS.............(0x198) : 0x194F00000C00
------------------------------------------
- Current Performance State Value...... : 0xC00 (1200 MHz)

MSR_IA32_PERF_CONTROL............(0x199) : 0xFF00
------------------------------------------
- Target performance State Value....... : 0xFF00 (25500 MHz)
- Intel Dynamic Acceleration........... : 0 (IDA engaged)

IA32_CLOCK_MODULATION............(0x19A) : 0x0

IA32_THERM_INTERRUPT.............(0x19B) : 0x0

IA32_THERM_STATUS................(0x19C) : 0x88420000
------------------------------------------
- Thermal Status....................... : 0
- Thermal Log.......................... : 0
- PROCHOT # or FORCEPR# event.......... : 0
- PROCHOT # or FORCEPR# log............ : 0
- Critical Temperature Status.......... : 0
- Critical Temperature log............. : 0
- Thermal Threshold #1 Status.......... : 0
- Thermal Threshold #1 log............. : 0
- Thermal Threshold #2 Status.......... : 0
- Thermal Threshold #2 log............. : 0
- Power Limitation Status.............. : 0
- Power Limitation log................. : 0
- Current Limit Status................. : 0
- Current Limit log.................... : 0
- Cross Domain Limit Status............ : 0
- Cross Domain Limit log............... : 0
- Digital Readout...................... : 66
- Resolution in Degrees Celsius........ : 1
- Reading Valid........................ : 1 (valid)

MSR_THERM2_CTL...................(0x19D) : 0x0

IA32_MISC_ENABLES................(0x1A0) : 0x850089
------------------------------------------
- Fast-Strings......................... : 1 (enabled)
- FOPCODE compatibility mode Enable.... : 0
- Automatic Thermal Control Circuit.... : 1 (enabled)
- Split-lock Disable................... : 0
- Performance Monitoring............... : 1 (available)
- Bus Lock On Cache Line Splits Disable : 0
- Hardware prefetch Disable............ : 0
- Processor Event Based Sampling....... : 0 (PEBS supported)
- GV1/2 legacy Enable.................. : 0
- Enhanced Intel SpeedStep Technology.. : 1 (enabled)
- MONITOR FSM.......................... : 1 (MONITOR/MWAIT supported)
- Adjacent sector prefetch Disable..... : 0
- CFG Lock............................. : 0 (MSR not locked)
- xTPR Message Disable................. : 1 (disabled)

MSR_TEMPERATURE_TARGET...........(0x1A2) : 0x640A00
------------------------------------------
- Turbo Attenuation Units.............. : 0
- Temperature Target................... : 100
- TCC Activation Offset................ : 0

MSR_MISC_PWR_MGMT................(0x1AA) : 0x402000
------------------------------------------
- EIST Hardware Coordination........... : 0 (hardware coordination enabled)
- Energy/Performance Bias support...... : 1
- Energy/Performance Bias.............. : 0 (disabled/MSR not visible to software)
- Thermal Interrupt Coordination Enable : 1 (thermal interrupt routed to all cores)
- SpeedShift Technology Enable......... : 0 (disabled)
- SpeedShift Interrupt Coordination.... : 0 (disabled)
- SpeedShift Energy Efficient Perf..... : 0 (disabled)
- SpeedShift Technology Setup for HWP.. : No (not setup for HWP)

MSR_TURBO_RATIO_LIMIT............(0x1AD) : 0x2B2B2B2B2B2B2B2B
------------------------------------------
- Maximum Ratio Limit for C01.......... : 2B (4300 MHz)
- Maximum Ratio Limit for C02.......... : 2B (4300 MHz)
- Maximum Ratio Limit for C03.......... : 2B (4300 MHz)
- Maximum Ratio Limit for C04.......... : 2B (4300 MHz)
- Maximum Ratio Limit for C05.......... : 2B (4300 MHz)
- Maximum Ratio Limit for C06.......... : 2B (4300 MHz)
- Maximum Ratio Limit for C07.......... : 2B (4300 MHz)
- Maximum Ratio Limit for C08.......... : 2B (4300 MHz)

MSR_TURBO_RATIO_LIMIT1...........(0x1AE) : 0x2222222222222B2B
------------------------------------------
- Maximum Ratio Limit for C09.......... : 2B (4300 MHz)
- Maximum Ratio Limit for C10.......... : 2B (4300 MHz)

IA32_ENERGY_PERF_BIAS............(0x1B0) : 0x5
------------------------------------------
- Power Policy Preference...............: 5 (balanced performance and energy saving)

MSR_POWER_CTL....................(0x1FC) : 0x2904005B
------------------------------------------
- Bi-Directional Processor Hot..........: 1 (enabled)
- C1E Enable............................: 1 (enabled)

MSR_RAPL_POWER_UNIT..............(0x606) : 0xA0E03
------------------------------------------
- Power Units.......................... : 3 (1/8 Watt)
- Energy Status Units.................. : 14 (61 micro-Joules)
- Time Units .......................... : 10 (976.6 micro-Seconds)

MSR_PKG_POWER_LIMIT..............(0x610) : 0x7FFF80015FFF8
------------------------------------------
- Package Power Limit #1............... : 4095 Watt
- Enable Power Limit #1................ : 1 (enabled)
- Package Clamping Limitation #1....... : 1 (allow going below OS-requested P/T state during Time Window for Power Limit #1)
- Time Window for Power Limit #1....... : 10 (2560 milli-Seconds)
- Package Power Limit #2............... : 4095 Watt
- Enable Power Limit #2................ : 1 (enabled)
- Package Clamping Limitation #2....... : 1 (allow going below OS-requested P/T state setting Time Window for Power Limit #2)
- Time Window for Power Limit #2....... : 3 (20 milli-Seconds)
- Lock................................. : 0 (MSR not locked)

MSR_PKG_ENERGY_STATUS............(0x611) : 0x6150A37
------------------------------------------
- Total Energy Consumed................ : 6228 Joules (Watt = Joules / seconds)

MSR_PKGC3_IRTL...................(0x60a) : 0x0
MSR_PKGC6_IRTL...................(0x60b) : 0x0
MSR_PKGC7_IRTL...................(0x60c) : 0x0
MSR_PKG_C2_RESIDENCY.............(0x60d) : 0x8A2A86A06
MSR_PKG_C3_RESIDENCY.............(0x3f8) : 0x16DE2AE
MSR_PKG_C2_RESIDENCY.............(0x60d) : 0x8A2A86A06
MSR_PKG_C3_RESIDENCY.............(0x3f8) : 0x16DE2AE
MSR_PKG_C6_RESIDENCY.............(0x3f9) : 0x18AE80A5F4
MSR_PKG_C7_RESIDENCY.............(0x3fa) : 0x0

IA32_TSC_DEADLINE................(0x6E0) : 0xC43E467AA7

CPU Ratio Info:
------------------------------------------
Base Clock Frequency (BLCK)............. : 100 MHz
Maximum Efficiency Ratio/Frequency.......: 12 (1200 MHz)
Maximum non-Turbo Ratio/Frequency........: 30 (3000 MHz)
Maximum Turbo Ratio/Frequency............: 43 (4300 MHz)
P-State ratio * 100 = Frequency in MHz
------------------------------------------
CPU P-States [ 32 (43) ]
CPU C3-Cores [ 0 2 4 8 10 12 14 16 19 ]
CPU C6-Cores [ 1 3 5 7 9 11 13 15 17 19 ]
CPU P-States [ 32 39 (43) ]
CPU C3-Cores [ 0 2 4 5 8 10 12 14 16 18 19 ]
CPU C6-Cores [ 0 1 3 5 6 7 9 11 12 13 15 17 19 ]
CPU C6-Cores [ 0 1 3 5 6 7 9 11 12 13 15 16 17 19 ]
CPU P-States [ (12) 32 39 43 ]
CPU C3-Cores [ 0 1 2 4 5 8 10 12 14 16 18 19 ]
CPU C6-Cores [ 0 1 3 5 6 7 9 11 12 13 14 15 16 17 19 ]
CPU C3-Cores [ 0 1 2 4 5 8 9 10 12 14 16 18 19 ]
CPU C6-Cores [ 0 1 3 5 6 7 8 9 11 12 13 14 15 16 17 19 ]
CPU C3-Cores [ 0 1 2 4 5 8 9 10 12 13 14 16 18 19 ]
CPU P-States [ 12 32 37 39 (43) ]
CPU P-States [ (12) 32 37 39 41 43 ]
CPU C6-Cores [ 0 1 2 3 5 6 7 8 9 11 12 13 14 15 16 17 19 ]
CPU P-States [ 12 32 37 39 40 41 (43) ]
CPU C3-Cores [ 0 1 2 3 4 5 8 9 10 12 13 14 16 18 19 ]
CPU P-States [ (12) 32 37 38 39 40 41 43 ]
CPU P-States [ 12 32 36 37 38 39 40 41 (43) ]
CPU P-States [ 12 32 36 37 38 39 40 41 42 (43) ]
CPU C6-Cores [ 0 1 2 3 4 5 6 7 8 9 11 12 13 14 15 16 17 19 ]
CPU P-States [ 12 32 35 36 37 38 39 40 41 42 (43) ]
CPU C6-Cores [ 0 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 19 ]
CPU C3-Cores [ 0 1 2 3 4 5 8 9 10 11 12 13 14 16 18 19 ]
CPU C6-Cores [ 0 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 ]
CPU C3-Cores [ 0 1 2 3 4 5 8 9 10 11 12 13 14 16 17 18 19 ]
CPU P-States [ 12 29 32 35 36 37 38 39 40 41 42 (43) ]
CPU C3-Cores [ 0 1 2 3 4 5 8 9 10 11 12 13 14 15 16 17 18 19 ]
CPU P-States [ 12 29 32 34 35 36 37 38 39 40 41 42 (43) ]
CPU P-States [ (12) 29 32 33 34 35 36 37 38 39 40 41 42 43 ]
CPU P-States [ 12 29 30 32 33 34 35 36 37 38 39 40 41 42 (43) ]
CPU C3-Cores [ 0 1 2 3 4 5 6 8 9 10 11 12 13 14 15 16 17 18 19 ]
CPU P-States [ (12) 28 29 30 32 33 34 35 36 37 38 39 40 41 42 43 ]
CPU C3-Cores [ 0 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 ]
CPU P-States [ 12 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 (43) ]

  • Broadwell-E OC problem solved
  • No PMDrvr.kext
  • Full Sleep/Wake Functionality
View attachment 333330
Click to expand...

Me too! I am having very poor and inconsistent Geekbench and Cinebench scores in mi High Sierra drive. Fortunately, I have another SSD with Sierra on it. So last week has been: working on Sierra and experimenting with OC on High Sierra in my free time (which also means playing Rise of the Tomb Raider :)).

My system is:

MOBO: Gigabyte GA-X99 Ultra-Gaming
CPU: i7 Broadwell-E 6850K OC @ 4.30 Ghz w/Raidmax Cobra 120cc liquid cooling
RAM: 2X16 Crucial Ballistic 2400 Mhz
GPU: EVGA GeForce 1060 3GB

And for the scores:

* Sierra:
Geekbench 4: Single Core: 5081, Multi-Core: 25895.
Cinebench: CPU Test: 1296.

* High Sierra:
Geekbench 4: Single Core: 4916, Multi-Core: 21084.
Cinebench: CPU Test: 1083.

@kgp I followed your guides for both OS, they are great and what you do is gold to everyone here. Did everything exactly as written. For High Sierra, I installed 10.13.4 first, then I read one of your post on this thread and downgraded to 10.13.3 for better OC results. Didn't make much of a difference (22061 on Multi-Core on Geekbench)

EDIT: Installing 10.13.5 beta now! See you on the other side..
 
  • Like
Reactions: kgp
malteasers said:
I certainly do! Please tell us how!!
Click to expand...

I will... :thumbup:

Please provide your X99 system specs (mobo, CPU, GPU) in either your profile or signature.

Thanks in advance,

KGP
 
Last edited:
kgp said:
:headbang:;):lol:Who wants to kiss me for this?:lol:;):headbang:

View attachment 333328

View attachment 333329

View attachment 333323

View attachment 333324

View attachment 333325

View attachment 333326

Code: 
AppleIntelInfo.kext v2.9 Copyright © 2012-2017 Pike R. Alpha. All rights reserved.

Settings:
------------------------------------------
logMSRs..................................: 1
logIGPU..................................: 0
logCStates...............................: 1
logIPGStyle..............................: 1
InitialTSC...............................: 0xc43970e860 (28 MHz)
MWAIT C-States...........................: 8480

Processor Brandstring....................: Intel(R) Core(TM) i7-6950X CPU @ 3.00GHz

Processor Signature..................... : 0x406F1
------------------------------------------
- Family............................... : 6
- Stepping............................. : 1
- Model................................ : 0x4F (79)

Model Specific Registers (MSRs)
------------------------------------------

MSR_IA32_PLATFORM_ID.............(0x17)  : 0x8000000000000
------------------------------------------
- Processor Flags...................... : 2

MSR_CORE_THREAD_COUNT............(0x35)  : 0xA0014
------------------------------------------
- Core Count........................... : 10
- Thread Count......................... : 20

MSR_PLATFORM_INFO................(0xCE)  : 0x20080C3BF3811E00
------------------------------------------
- Maximum Non-Turbo Ratio.............. : 0x1E (3000 MHz)
- Ratio Limit for Turbo Mode........... : 1 (programmable)
- TDP Limit for Turbo Mode............. : 1 (programmable)
- Low Power Mode Support............... : 1 (LPM supported)
- Number of ConfigTDP Levels........... : 1 (additional TDP level(s) available)
- Maximum Efficiency Ratio............. : 12
- Minimum Operating Ratio.............. : 8

MSR_PMG_CST_CONFIG_CONTROL.......(0xE2)  : 0x1E000005
------------------------------------------
- I/O MWAIT Redirection Enable......... : 0 (not enabled)
- CFG Lock............................. : 0 (MSR not locked)
- C3 State Auto Demotion............... : 1 (enabled)
- C1 State Auto Demotion............... : 1 (enabled)
- C3 State Undemotion.................. : 1 (enabled)
- C1 State Undemotion.................. : 1 (enabled)
- Package C-State Auto Demotion........ : 0 (disabled/unsupported)
- Package C-State Undemotion........... : 0 (disabled/unsupported)

MSR_PMG_IO_CAPTURE_BASE..........(0xE4)  : 0x10414
------------------------------------------
- LVL_2 Base Address................... : 0x414
- C-state Range........................ : 1 (C-States not included, I/O MWAIT redirection not enabled)

IA32_MPERF.......................(0xE7)  : 0x982A5FC00
IA32_APERF.......................(0xE8)  : 0xC38DDBABB
MSR_0x150........................(0x150) : 0x0

MSR_FLEX_RATIO...................(0x194) : 0xE0000
------------------------------------------

MSR_IA32_PERF_STATUS.............(0x198) : 0x194F00000C00
------------------------------------------
- Current Performance State Value...... : 0xC00 (1200 MHz)

MSR_IA32_PERF_CONTROL............(0x199) : 0xFF00
------------------------------------------
- Target performance State Value....... : 0xFF00 (25500 MHz)
- Intel Dynamic Acceleration........... : 0 (IDA engaged)

IA32_CLOCK_MODULATION............(0x19A) : 0x0

IA32_THERM_INTERRUPT.............(0x19B) : 0x0

IA32_THERM_STATUS................(0x19C) : 0x88420000
------------------------------------------
- Thermal Status....................... : 0
- Thermal Log.......................... : 0
- PROCHOT # or FORCEPR# event.......... : 0
- PROCHOT # or FORCEPR# log............ : 0
- Critical Temperature Status.......... : 0
- Critical Temperature log............. : 0
- Thermal Threshold #1 Status.......... : 0
- Thermal Threshold #1 log............. : 0
- Thermal Threshold #2 Status.......... : 0
- Thermal Threshold #2 log............. : 0
- Power Limitation Status.............. : 0
- Power Limitation log................. : 0
- Current Limit Status................. : 0
- Current Limit log.................... : 0
- Cross Domain Limit Status............ : 0
- Cross Domain Limit log............... : 0
- Digital Readout...................... : 66
- Resolution in Degrees Celsius........ : 1
- Reading Valid........................ : 1 (valid)

MSR_THERM2_CTL...................(0x19D) : 0x0

IA32_MISC_ENABLES................(0x1A0) : 0x850089
------------------------------------------
- Fast-Strings......................... : 1 (enabled)
- FOPCODE compatibility mode Enable.... : 0
- Automatic Thermal Control Circuit.... : 1 (enabled)
- Split-lock Disable................... : 0
- Performance Monitoring............... : 1 (available)
- Bus Lock On Cache Line Splits Disable : 0
- Hardware prefetch Disable............ : 0
- Processor Event Based Sampling....... : 0 (PEBS supported)
- GV1/2 legacy Enable.................. : 0
- Enhanced Intel SpeedStep Technology.. : 1 (enabled)
- MONITOR FSM.......................... : 1 (MONITOR/MWAIT supported)
- Adjacent sector prefetch Disable..... : 0
- CFG Lock............................. : 0 (MSR not locked)
- xTPR Message Disable................. : 1 (disabled)

MSR_TEMPERATURE_TARGET...........(0x1A2) : 0x640A00
------------------------------------------
- Turbo Attenuation Units.............. : 0
- Temperature Target................... : 100
- TCC Activation Offset................ : 0

MSR_MISC_PWR_MGMT................(0x1AA) : 0x402000
------------------------------------------
- EIST Hardware Coordination........... : 0 (hardware coordination enabled)
- Energy/Performance Bias support...... : 1
- Energy/Performance Bias.............. : 0 (disabled/MSR not visible to software)
- Thermal Interrupt Coordination Enable : 1 (thermal interrupt routed to all cores)
- SpeedShift Technology Enable......... : 0 (disabled)
- SpeedShift Interrupt Coordination.... : 0 (disabled)
- SpeedShift Energy Efficient Perf..... : 0 (disabled)
- SpeedShift Technology Setup for HWP.. : No (not setup for HWP)

MSR_TURBO_RATIO_LIMIT............(0x1AD) : 0x2B2B2B2B2B2B2B2B
------------------------------------------
- Maximum Ratio Limit for C01.......... : 2B (4300 MHz)
- Maximum Ratio Limit for C02.......... : 2B (4300 MHz)
- Maximum Ratio Limit for C03.......... : 2B (4300 MHz)
- Maximum Ratio Limit for C04.......... : 2B (4300 MHz)
- Maximum Ratio Limit for C05.......... : 2B (4300 MHz)
- Maximum Ratio Limit for C06.......... : 2B (4300 MHz)
- Maximum Ratio Limit for C07.......... : 2B (4300 MHz)
- Maximum Ratio Limit for C08.......... : 2B (4300 MHz)

MSR_TURBO_RATIO_LIMIT1...........(0x1AE) : 0x2222222222222B2B
------------------------------------------
- Maximum Ratio Limit for C09.......... : 2B (4300 MHz)
- Maximum Ratio Limit for C10.......... : 2B (4300 MHz)

IA32_ENERGY_PERF_BIAS............(0x1B0) : 0x5
------------------------------------------
- Power Policy Preference...............: 5 (balanced performance and energy saving)

MSR_POWER_CTL....................(0x1FC) : 0x2904005B
------------------------------------------
- Bi-Directional Processor Hot..........: 1 (enabled)
- C1E Enable............................: 1 (enabled)

MSR_RAPL_POWER_UNIT..............(0x606) : 0xA0E03
------------------------------------------
- Power Units.......................... : 3 (1/8 Watt)
- Energy Status Units.................. : 14 (61 micro-Joules)
- Time Units .......................... : 10 (976.6 micro-Seconds)

MSR_PKG_POWER_LIMIT..............(0x610) : 0x7FFF80015FFF8
------------------------------------------
- Package Power Limit #1............... : 4095 Watt
- Enable Power Limit #1................ : 1 (enabled)
- Package Clamping Limitation #1....... : 1 (allow going below OS-requested P/T state during Time Window for Power Limit #1)
- Time Window for Power Limit #1....... : 10 (2560 milli-Seconds)
- Package Power Limit #2............... : 4095 Watt
- Enable Power Limit #2................ : 1 (enabled)
- Package Clamping Limitation #2....... : 1 (allow going below OS-requested P/T state setting Time Window for Power Limit #2)
- Time Window for Power Limit #2....... : 3 (20 milli-Seconds)
- Lock................................. : 0 (MSR not locked)

MSR_PKG_ENERGY_STATUS............(0x611) : 0x6150A37
------------------------------------------
- Total Energy Consumed................ : 6228 Joules (Watt = Joules / seconds)

MSR_PKGC3_IRTL...................(0x60a) : 0x0
MSR_PKGC6_IRTL...................(0x60b) : 0x0
MSR_PKGC7_IRTL...................(0x60c) : 0x0
MSR_PKG_C2_RESIDENCY.............(0x60d) : 0x8A2A86A06
MSR_PKG_C3_RESIDENCY.............(0x3f8) : 0x16DE2AE
MSR_PKG_C2_RESIDENCY.............(0x60d) : 0x8A2A86A06
MSR_PKG_C3_RESIDENCY.............(0x3f8) : 0x16DE2AE
MSR_PKG_C6_RESIDENCY.............(0x3f9) : 0x18AE80A5F4
MSR_PKG_C7_RESIDENCY.............(0x3fa) : 0x0

IA32_TSC_DEADLINE................(0x6E0) : 0xC43E467AA7

CPU Ratio Info:
------------------------------------------
Base Clock Frequency (BLCK)............. : 100 MHz
Maximum Efficiency Ratio/Frequency.......: 12 (1200 MHz)
Maximum non-Turbo Ratio/Frequency........: 30 (3000 MHz)
Maximum Turbo Ratio/Frequency............: 43 (4300 MHz)
P-State ratio * 100 = Frequency in MHz
------------------------------------------
CPU P-States [ 32 (43) ]
CPU C3-Cores [ 0 2 4 8 10 12 14 16 19 ]
CPU C6-Cores [ 1 3 5 7 9 11 13 15 17 19 ]
CPU P-States [ 32 39 (43) ]
CPU C3-Cores [ 0 2 4 5 8 10 12 14 16 18 19 ]
CPU C6-Cores [ 0 1 3 5 6 7 9 11 12 13 15 17 19 ]
CPU C6-Cores [ 0 1 3 5 6 7 9 11 12 13 15 16 17 19 ]
CPU P-States [ (12) 32 39 43 ]
CPU C3-Cores [ 0 1 2 4 5 8 10 12 14 16 18 19 ]
CPU C6-Cores [ 0 1 3 5 6 7 9 11 12 13 14 15 16 17 19 ]
CPU C3-Cores [ 0 1 2 4 5 8 9 10 12 14 16 18 19 ]
CPU C6-Cores [ 0 1 3 5 6 7 8 9 11 12 13 14 15 16 17 19 ]
CPU C3-Cores [ 0 1 2 4 5 8 9 10 12 13 14 16 18 19 ]
CPU P-States [ 12 32 37 39 (43) ]
CPU P-States [ (12) 32 37 39 41 43 ]
CPU C6-Cores [ 0 1 2 3 5 6 7 8 9 11 12 13 14 15 16 17 19 ]
CPU P-States [ 12 32 37 39 40 41 (43) ]
CPU C3-Cores [ 0 1 2 3 4 5 8 9 10 12 13 14 16 18 19 ]
CPU P-States [ (12) 32 37 38 39 40 41 43 ]
CPU P-States [ 12 32 36 37 38 39 40 41 (43) ]
CPU P-States [ 12 32 36 37 38 39 40 41 42 (43) ]
CPU C6-Cores [ 0 1 2 3 4 5 6 7 8 9 11 12 13 14 15 16 17 19 ]
CPU P-States [ 12 32 35 36 37 38 39 40 41 42 (43) ]
CPU C6-Cores [ 0 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 19 ]
CPU C3-Cores [ 0 1 2 3 4 5 8 9 10 11 12 13 14 16 18 19 ]
CPU C6-Cores [ 0 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 ]
CPU C3-Cores [ 0 1 2 3 4 5 8 9 10 11 12 13 14 16 17 18 19 ]
CPU P-States [ 12 29 32 35 36 37 38 39 40 41 42 (43) ]
CPU C3-Cores [ 0 1 2 3 4 5 8 9 10 11 12 13 14 15 16 17 18 19 ]
CPU P-States [ 12 29 32 34 35 36 37 38 39 40 41 42 (43) ]
CPU P-States [ (12) 29 32 33 34 35 36 37 38 39 40 41 42 43 ]
CPU P-States [ 12 29 30 32 33 34 35 36 37 38 39 40 41 42 (43) ]
CPU C3-Cores [ 0 1 2 3 4 5 6 8 9 10 11 12 13 14 15 16 17 18 19 ]
CPU P-States [ (12) 28 29 30 32 33 34 35 36 37 38 39 40 41 42 43 ]
CPU C3-Cores [ 0 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 ]
CPU P-States [ 12 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 (43) ]

  • Broadwell-E OC problem solved
  • No PMDrvr.kext
  • Full Sleep/Wake Functionality
View attachment 333330
Click to expand...
Lucky me!:clap::clap::clap:
I want to know too mate
 
Status
Not open for further replies.
Copyright © 2010 - 2024 tonymacx86 LLC
Back
Top