kgp
Retired
- Joined
- May 30, 2014
- Messages
- 6,743
- Motherboard
- ASUS WS X299 Sage 10G
- CPU
- i9-7980XE
- Graphics
- Vega 64
- Mac
- Mobile Phone
And you also tried to use the alternative config.plist attached in #post 216, right?
Thank you, I really appreciate your help. I do have the thunderbolt card removed, only 1 GPU no other PCI devices, I have the proc, GPU, ram and Samsung NVME SSD Samsung EVO 950 1TiB nothing else. (maybe I get an X99A-II)Well lets wait on the reply of @Obecny , @GDS , @wayne2401 .
I cannot help you more at this point.
With the BIOS settings above and EFI-10.13-TM-040817a.zip, the USB Flash Drive PB3/DP4 installer/Updater just works flawless with the ASUS X99-A II and i7-6950X. I just verified it once more by downloading EFI-10.13-TM-040817a.zip and subsequently successfully booting the USB Flash Drive PB3/DP4 Installer/Updater.
You have the TB PCIe card removed, right? And you also just use one graphics card, right? No additional PCIe cards, right?
Cheers,
KGP
I have just noticed my bios is older as I have 1601, patched!
I have attached here my bios settings in txt and also a file with asus profile you can load if you have matched bios 1601, keep in mind I have 6900k
I have just noticed my bios is older as I have 1601, patched!
I have attached here my bios settings in txt and also a file with asus profile you can load if you have matched bios 1601, keep in mind I have 6900k
Wow, your settings are no where near a match to KGP's settings. I'll match to you with 1701, and then see what happens.
@Obecny, I realized that you have the ASUS Multicore Enhancement: Enabled. Shouldn't it be disabled?
@duckgrossberg , Obecny has CPU C-States [Auto] , EHCI Hand-off [Disabled]. Maybe you find more differences... In any case note that he also has Intel Thunderbolt Technology [Disabled] , which is absolutely correct for the PB3/DP4 clean install.
Cheers,
KGP
Wow, not my intention at all. I apologize if I have seem upsetting or misleading.@duckgrossberg, the above comment is absolute nonsense, sorry! @Obecny 's settings are identical with mine except those points mentioned in #post 244 above!
Don't distribute misleading and wrong statements and comments, which just further confuse the reader!
You are already shaking this thread enough with your particular issues and problems!
Cheers,
KGP
Wow, not my intention at all. I apologize if I have seem upsetting or misleading.
When the thunderbolt card is not installed you don't have an option to enable or disable it, it just does not show up in the bios.
That is why I do not have the option to enable/disable. It just does not exist to the mobo when the card is not installed.
@Obecny, I can't boot with your bios settings, not even in to the sierra installer on my other thumb drive. com.apple.xpc.launchd gets stuck in a loop and will not allow the core system to mount.
I'm wondering now if something about BIOS v 1701 is the culprit with High Sierra.