x99

Hi everyone, as i see these days few people selling 5960x because they can't update to El cap, is there any chance to see this 8-core working on a newer Os than Yosemite ? just wanted to know what you think about it Thib

​​hey guys, this is my first post on this forum and i am quite new to mackintosh world... i am just about to buy this build for a first hack, i know its not the easiest one but i've seen here and there few stable hacks. I ll be using this build for music production and a bit of 3d rendering...

https://www.dropbox.com/s/6daqzkit4w48yka/2016-02-01.jpg?dl=0 Here is a picture when I select an audio device the video lags and no sound is playing. Any solutions would be extremely helpful

Hi guys, I'm using my hackintosh for quite a while now. And except for the fact my gigabyte x99 ud5 crashed, the system works fine! Though, from the start it always felt like yosemite isn't using the full capacity of the GTX980. There's always 1 gpu fan spinning, on a very very low rpm...

Hi guys, I've nearly finished getting my x99 hack running smoothly, but I'm having a kernel flag issue.. The system won't boot into Yosemite unless I type these kernel flags at startup: ncpi=0x2000 nvda_drv=1 I've already added them to my chameleon.boot.plist so I'm not sure what the issue...

Hello Everybody :) First, thank you so much! This community is great - we wouldn't been able to get our X99-System up and running without you guys! :thumbup: But there are still some problems, especially with graphics... Our Setup: - Gigabyte X99 UD5 Wifi - Intel i7 5930k - EVGA GTX 980 Ti -...

I am trying to install OS X El Capitan but i keep getting errors. I am stuck at that error mainly: I also tried lots of boot flags but still got different errors, Here is my rig:- Mobo: MSI X99A Raider CPU: Intel Core i7 5820K Graphics Card: Gigabyte GTX 970 G1 Gaming RAM: Kingston 16GBs DDR4...

I have been trying to patch the kernel for my x99 build with this command sudo perl -pi -e 's|\x74\x11\x83\xF8\x3C|\x74\x11\x83\xF8\x3F|g' /Volumes/UniBeast/System/Library/Kernels/kernel Then I get this Can't open /Volumes/UniBeast/System/Library/Kernels/kernel: No such file or directory...

Hi guys, Today I installed OSX 10.10.5 on my X99 Hackintosh build. (see specs below) I followed this nice guide from Malki, and as far as i can see everything worked out fine. I already had a SSD installed with a windows 7 installation, this was also shown when booting from the Unibeast drive...

Hi guys, I'm seriously in need of help here.. I'll try to keep it short and simple. Here are my components: MOBO: ASUS X99-A USB 3.0 CPU: Intel i7 5820k GPU: ASUS GTX 980ti STRIX RAM: G.SKILL Ripjaw DDR4 32GB 2133MHz CASE: Fractal Design - Define R4 CPU COOLER: be quiet! Pure Rock CPU Cooler...

Bill Stewarts X99 Audio/Animation Workstation Build: ASUS-X99-A USB 3.0 - i7 5820k - GTX 980ti - G.Skill 32GB Components: MOBO: ASUS X99-A USB 3.0 http://www.newegg.com/Product/Product.aspx?Item=N82E16813132261 CPU: Intel i7 5820k...

After a successful installation of Mac OS X Yosemite, shortly after when booting up again it would not boot and would result in a kernel panic (images attached). I did not change anything from the time it was working and then when it stopped working. First time posting as I tend to work out...

So the time has come to build my next Hack and since I edit for a living I decided to focus on this area. I'm obviously going to benefit more from a higher amount of cores so I'm going with the 5820K. I've been looking on the internet for a few days now and I cant find a clear enough build guide...

Hi guys, After several days of research, I think I am going to attempt an x99 build. These are the components that I'm fairly certain of: i7 5820k CPU GTX 980 Ti Crucial Ballistix 32GB DDR4 2400 Fractal Define R4 Case SeaSonic G-750 Power Supply I'm very unsure about the motherboard...

Hi, I've browsed a lot of forums lately, and so far couldn't get myself assured whether or if any of these builds could work. I would like to make it with X99 Chipset, as Intel plans to use in the future the socket of 2011V3. I'm not planning to overclock it, as i would like to keep the...

Asrock X99 Extreme3 with Xeon E5-1650V3, GTX 980 Ti and OSX 10.11.1 El Capitan This has been a tricky build as basicly none of the solutions for other X99 builds I found on this awesome forum (and a couple of other forums) worked for this Asrock board. So for all of those who would like...

I've been able to successfully install on my X99-UD4 with a 5930K and GTX970. The only issue I'm having is when the boot up is finished my monitor goes into sleep mode and I have no output from the GTX 970. I can boot from the install flash drive with no issues. Is there a work around for this...

OSX 10.10.5 Yosemite and 10.11.1 El Capitan on Asrock X99 Extreme3 - Xeon E5-1650V3 - GTX 980 Ti - 32GB DDR4 ECC Components Asrock X99 Extreme3 Motherboard [Amazon-de]http://www.amazon.de/Asrock-X99-Extreme3-Mainboard-DDR4-Speicher/dp/B00NC4UZXS[/Amazon-de] Intel Xeon E5-1650V3 6x3,5GHz (12...

i have a msi x99a sli motherboard and i can't even get into the installer of el capitan now i may have been able to get things working in Yosemite but i can't download it anymore so the only way i can install it is by copying the boot drive from my mac pro so does anyone have any idea how to...

I have a new PC configured as follow: Asus X99 Deluxe using BIOS version 2001 (just updated) Intel i7-5930k Corsair Vengeance LPX DDR4 3200 MHz 4x8 = 32 GB (no overclock, the BIOS see them at 2133 MHz) Samsung SM951 256 GB SSD mounted using the M.2 interface MSI Twin Frozr III ATI Radeon 6870...