flags

Hi, I bought a wifi pci-e card today (TL-WN881ND) and with my clover configurator checked boxes for AddDTGP & FixAirport in the ACPI > DSDT fixes section as this was a recommended way to get it to work. After adding this I restarted and now have a kernel panic: panic(cpu 0 caller...

Hi guys, I'm new to hackintosh and I'm having trouble with boot flags. I've tried many different commands but i keep getting stuck at the apple logo. Here are my specs: Motherboard: ASUS B150-PRO CPU; Intel Core i5-6500 Graphics Card: NVIDIA GForce GTX 950 Any help would be very helpful. Thanks...

hi, am trying to install mavericks for first time but i cant boot whitout the flag nv_disable=1 and -f i dont know why i tried every forum already and thats why im stating this one, by the way my graphics card its a ecs geforce 9800 of 1gb thanks a lot for any possible help

First time "Hackintoshing," I'm stuck at the boot loader. Please read whole post so to not repeat troubleshooting ideas. Specs: Asus X99 Deluxe, i7 5930k, 32 GB Corsair Vengeance DDR4, Gigabyte GTX 970 G1 Gaming. Clean install on a blank 1TB SSD. A separate SSD is running Win 10. Followed...

I have the following settings: Mother Intel Server S5520HC Intel Xeon E5620 2.4Ghz (1366LGA) 16GB DDR3 Zotac GTX 970 Led TV 24 Philips HDMI input I was trying to follow the guide of El Capitan 10.11 but I can not starting installation with the interfaz. Trying with flags: -v The...

**NOTE- I have never posted on this forum before, if this thread is in thew wrong location please let me know. On my installation for Yosemite, I used a different bootloader, and after booting with GraphicsEnabler=0 and /haswell for the kernel, all I had to do was /maxmem=4096 and I was able to...

Sony Vaio VPCEB2Z1E/BQ [SOLVED] First things first. I installed Mac OS X Snow Leopard using iBoot and no flags but -v and USBLegacyOff=Yes to enable USB devices. I then used the update helper and the 10.6.8 combo update and multibeast to install the EasyBeast and the System Utilities only. Now...

[SOLVED] Unable to run unibeast installer Yosemite / Mavericks I have been trying for a few hours to try and the the system to work with no avail My setup: Gigabyte GA-Z97-D3H 16GB Corsaire Vengence RAM Intel Core i5 4450 EVGA GeForce GTX 960 Superclocked 2GB The monitor is running through...

Hi everybody, I am trying to install Yosemite on Hi everybody, I am trying to install Yosemite on my asus x55a. I use chimera. When I try to load the installation, I see theapple logo and the progress bar and then it freezes. So I doubt if I need to enter some specific flags. My laptop...

Stuck at Installation Loading Screen - Yosemite Error Hello everyone! I have completed all of the steps required for me to begin installing Mac OS X on to my desktop. However, I am having trouble with flags and/or something to do with the hard drive in which the operating system wants to mount...

Hello. I recently setup my hackintosh build. :D My parts are: CPU: Intel Core i7 4790k Mobo: MSI z97 LGA1150 Gaming 5 Ram: Hyper x fury 1600mhz 2x4gb SSD: Samsung 850 EVO series 250 GB HDD: WD Caviar Black 1TB 7200RPM GPU: Asus Geforce GTX 970 4GB Strix PSU: Corsair CX 750W semi-modular ATX...

I'm trying to install Mac OS X Yosemite on a desktop computer with a Gigabyte GA-P55-UD3R motherboard. The computer boots from USB (created with Unibeast) to the Chimera bootloader. Without any flags, when I load up Yosemite for the first time I get to the Apple logo and shortly after, the...

I'm buying a GTX 970 for my computer, on the past there was no problems with graphic cards on Mountain Lion etc... now I searched around and I've seen that I need to download some experimental drivers to make the graphic card work FULL on Yosemite. I don't know if those drivers are these...

(Success)Yosemite doesn't boot after install Hi! I got to the installer of Yosemite and did an installation but now i can't reach Yosemite system (OS) ...(I had Mountain Lion and decided to install Yosemite) I tried this flags: -F -x kernel -v npci=0x2000 maxmem=4096 maxmem=8192...

Hi, how would i know what flags to use for my build? And also would a Gigabyte H81M-S2H use legacy support on the Unibeast installer?

Hello, I've installed Yosemite and all the features work brilliantly, only that when I come to start my machine using the HDD that Yosemite was installed on, I get an error about Windows error due to recent software changes. So I boot from the USB I used to install and everything works fine...

Hey guys, I'm trying to instal OS X Yosemite to my notebook specs: Intel Core i5-3210M CPU @2.50GHz, NVIDIA GeForce GTX 660M with 6GB ram. When I change the Boot to USB and press enter, there's only a white screen and the progress bar doesn't move a bit. It's enormously frustrating.. Please...

Hi, I am having some trouble booting both usb installer and yosemite atm, and I am quite sure it is my graphics. I do however have a usb keyboard that wont let me type a underscore when im in unibeast boot, which is annoying. I really think I need the flag nv_disable=1 , is there any...

Ok so I tried to install Yosemite a couple months ago to no avail, so this time I figured I'd try clover. I have followed the clover guide to a tee, using the nvidia config.plist file. So far when I try to install the OS the Apple logo shows up for a bit, the progress bar moves to about 1/3...

Hi, So after almost 2 months of troubleshooting I've made my first reasonably useable hackintosh. The problem is I have to use "nv_disable=1 GraphicsEnabler=No" to boot up. I'm wondering if this has any disadvantages in performance or my system. BTW. I have slow graphical performance. I'm not...