Hi Everyone, I have 2 hackintosh machines, One is a professional audio travel rig. I recently had to get an apollo X4 (instead of my thunderbolt 2 twin), It works if plugged at clover screen but disconnects after about thirty minutes and the only solution is a restart. I rely on it for stability...
Greetings. My configuration is as follows:
Motherboard: Asrock h61m-vg3
CPU: i5 2500
GPU: RX 470 XFX 4GB
Ram: 8 gb
Storage: SSD TeamGroup GX1 120GB
Power Supply: Cooler Master 550w
OS: macOS Mojave
My problem is the following. I have successfully installed macOS Mojave on my SSD, but after...
Solution Update:
Adding the "NvmExpressDxe.efi" driver solved it for me. There was no need to take any steps other than that, assuming that you already had the correct BIOS settings.
Hello,
I'm trying to take a stab at making my first hackintosh and I've gotten stuck on 1 issue for the past...
CPU always idle at 3.0GHz when I use clvoer, but opencore works well.
I try to use AppleIntelInfo.kext or Hackintool get some info, but get Fault Cpu panic.
There are no CFG option in my bios. I try to disable CFG Lock with this guide.(Patch CFG Lock)
Manual and Bios about my motherboard.
I...
Hello,
Finally I've been able to make (almost) everything work on my Mini-PC with Hackintosh and Windows. :headbang:
I'm writing this quick guide in case someone is having the same or a similar configuration.
HARDWARE
Case: ASRock DeskMini 310 Barebone Mini-PC
Motherboard: H310M-STX
CPU...
This guide is deprecated and unsupported. See this guide (using OpenCore).
My specific config: ASRock Z77 Extreme6 + i5 3470 (Ivy Bridge). YMMW.
Overall status: 95% working
Not working: a couple of USB 2.0 ports, probably iGPU HDMI sound.
A (most recent) copy of this guide can be found here...
Hello,
I have an ASRock DeskMini 310 mini-PC with an Intel Core i5 9500 and a standard S-ATA 2.5" SSD. I'm trying to install macOS Catalina.
First of all, I configured the BIOS as follows:
Advanced > Chipset Configuration > VT-d: Disabled
Advanced > Chipset Configuration > Onboard HD Audio...
Goal
To install macOS Mojave 10.14.6 with Samsung M.2 SSD 970 EVO Plus.
Issue
I have followed UniBeast installation guide, but the installer would not show up.
The images of log with verbose mode are attached as "log-1_1.jpg" and "log-1_2.jpg".
I found "AppleNVMe Assert failed" and...
I appreciate any input on this, thank you in advance.
I have High Sierra 10.13.6 running and I'm trying to clean install Mojave on the same machine using install media, but the screen blacks out("no signal detected" msg from my monitor) right after this.
But HDD LED keeps on blinking, and...
Hello! I have entered Hackintosh world few weeks ago. Now during the installation, I select the EFI device, and I select "Boot to install Mojave". It start but the loading bar still without moving of the starting. I have done everything that it's says on the guide to install Mojave on an ASRock...
SSDT for the Z390 Phantom Gaming-ITX.
For me, every port + internal bluetooth is working.
Due to the Reason that this is my first SSDT i created, maybe one of you guys can have a breve check, if i have everything done right.
Hi,
I am following the installation guide for Mojave to install on my PC. But installation fails with a stop sign after the Apple logo and first progress bar. Config as follows.
MB: Asrock z170 Gaming K4
CPU: intel i5 6600k
GPU: Asus GTX 1060 6G
Memory: Team T-Force Vulcan 16GB (2 x 8GB)
I...
Hi there. This is my first Hackintosh build ever, which of course means I have no idea what I'm doing wrong and why I can't get to the installer anymore.
The very first pass through, I got to the Install screen, but the machine was in a boot loop where the install page would say "31 minutes...
So i built a Hackintosh last year with specs such as;
i7 8700k
Asrock Z370 extreme 4
1070ti
16gb 2666 MHz RAM
Corsair H100i V2
Cooler Master H500p Mesh..
I installed Mac seamlessly last year, however formated the drive, meaning i had to re install High Sierra. By this point, Mojave had been...
Hardware:
NZXT H200i case (mini-ITX, but with good layout and cable management)
Corsair H100i AIO CPU cooler
Note: though the case says it fits 2x140mm fans, it does not fit the H115i with 2x140mm fans because the radiator is too large
ASRock Z390 Phantom Gaming-ITX/ac
NOTE 1: Shipped with...
Hello
I need a bit of help in understanding why I’m stuck and how to get my new build moving forward.
This is my third build, but it has been four years from when I built an z97 based system. That machine was easy to setup and maintain. Thinking big, I built something that should be fast for...
I have a problem with the reading of mojave usb, my pc does not read me the bootable usb with mojave above you can give me some advice?!?!?!
i7 8700
16gb ddr4
ASrock h310m-hdv
NVIDIA GE FORCE GTX 1050TI
Hey guys, this is my first customac build. i spend a lot of time here on the forum to be "prepared" for the first install, but no success. so i decided to post this topic.
this is my hw setup:
Corsair 88r carbide series Case
Toughpower 750w gold
Asrock Z390M Pro 4 Mainboard
Intel I9-9900K...
Hi guys, I'm trying to install mojave on my pc with:
8700k
asrock z370 extreme 4
16gb ram corsair vengeance led 3000
Psu EVGA supernova g3 650w
dissi Deepcool ex240
Vga Zotac 1080 amp extreme
ssd crucial mx500 250gb
I followed the whole guide here on the forum but when I select the disk where...
This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
By continuing to use this site, you are consenting to our use of cookies.