Contribute
Register

ASrock Z390 Phantom Gaming-ITX / USBInjectALL SSDT

Joined
Dec 12, 2018
Messages
15
Motherboard
Z390 ASRock Phantom mini ITX
CPU
i7-9700K
Graphics
UHD 630
SSDT for the Z390 Phantom Gaming-ITX.

For me, every port + internal bluetooth is working.

Due to the Reason that this is my first SSDT i created, maybe one of you guys can have a breve check, if i have everything done right.
 

Attachments

Joined
Dec 30, 2018
Messages
34
Motherboard
ASRock Z390 Taichi BIOS v1.2
CPU
i7-9700K
Graphics
RX 580
How did you get the Bluetooth to work? Did you replace the standard WiFi module?
 
Joined
Dec 12, 2018
Messages
15
Motherboard
Z390 ASRock Phantom mini ITX
CPU
i7-9700K
Graphics
UHD 630
Yes i replaced it with a BRDCM Card. Its just one skew, so the change is done in 5 Minutes.

I just mentioned the bluetooth, cause it's also listet as internal usb device, so if you want to use magic mouse and co i think it's important that your system recognises it.
 
Joined
Sep 21, 2017
Messages
14
Motherboard
ASRock Fatal1ty Z370 GAMING-ITX/AC
CPU
Intel i7-8700k
Graphics
Zotac mini GTX 1080
Does the USB-C work? I'm thinking about copying this for my ASrock Z370 Fatal1ty ITX board.
 
Joined
Dec 30, 2018
Messages
34
Motherboard
ASRock Z390 Taichi BIOS v1.2
CPU
i7-9700K
Graphics
RX 580
Yes i replaced it with a BRDCM Card. Its just one skew, so the change is done in 5 Minutes.

I just mentioned the bluetooth, cause it's also listet as internal usb device, so if you want to use magic mouse and co i think it's important that your system recognises it.
Do you have a link to the specific card you used? I am assuming you replaced the card in the enclosure used by the original card, if so, did it fit without modifying the housing.
 
Joined
Dec 12, 2018
Messages
15
Motherboard
Z390 ASRock Phantom mini ITX
CPU
i7-9700K
Graphics
UHD 630
Does the USB-C work? I'm thinking about copying this for my ASrock Z370 Fatal1ty ITX board.
USB-C (Apollo Twin Audio Interface) connected via Apples Thunderbolt 2 to Thunderbolt 3/ USB-C adapter works, but without hotplug. And it never gets recognised by the first boot, i always have to restart once to get it work.

Maybe I will try to write also an SSDT for this Problem, but at the moment this one restart at the beginning of every session doesn't really bother me.

p.s. I think someone here in this forum has already done one ssdt for the z370 ITX board. https://www.tonymacx86.com/threads/great-success-i5-8400-asrock-z370-fatal1ty-gaming-mini-itx-ac-intel-uhd-630-16gb-ram.244657/
 
Last edited:
Joined
Dec 12, 2018
Messages
15
Motherboard
Z390 ASRock Phantom mini ITX
CPU
i7-9700K
Graphics
UHD 630
Joined
Dec 29, 2018
Messages
13
Motherboard
ASRock Z390 Phantom Gaming ITX
CPU
i5-8400
Graphics
RX 580
Mac
MacBook Pro
Mobile Phone
iOS
BCM94352Z M.2 NGFF 802.11AC https://www.ebay.com/itm/New-Broadcom-BCM94352Z-M-2-NGFF-802-11AC-867Mbps-BT-4-0-DW1560-f-Mac-Hackintosh-/252319175707

Yes this card fits without any troubles. Same size, same pins - everything like the stock one.
That is good to know. After seeing your post, I found an older post by @pupin stating that a Broadcom card would work for our motherboard. Looks like now I can free up my m.2 slot. A couple of months back, I went with the route pictured below. Thanks for the info! Time to go fix it. C859A374-4911-4BA6-9C23-BE698C78790F.jpeg
 
Top