- Joined
- Mar 28, 2018
- Messages
- 4
I’ve been busy for 4 night installing High Sierra 10.13.1. for the zillionth time. The reason why I do not use 10.13.4 is: I already have one hack with Nvidia fully working which is on 10.13.1. so in the end I cloned that HDD added EFI and mounted that HDD onto another hakintosh.
So, the problem I have is with enabling Nvidia drivers. NVIDIA web driver is properly installed and seen in the upper corner but when selected and after reboot nothing happens. The screen is still flickering and system recognizes graphics display 7 mb. Not to mention that I read and tried EVERYTHING! From lilu, nvidiafix, emu64driver etc. Nothing works.
This is my specification:
Gigabyte GA-H270-Gaming 3
Corsair RM Series ATX/EPS Fully Modular 80 PLUS
Core i7-7700K
Crucial Ballistix Sport LT Single DDR4
Gigabyte GeForce GTX 1050 G1 Gaming 2GB GDDR5 3xHDMI
I know that GPU is working and it’s compatible cause I used it on another hackintosh that’s running properly. I compared clover, bios from that machine and set the other (same config) but it won’t work.
However, I managed to enable nvidia drivers when I switched GPU’s but since I didn’t have WIFE, KextBeast messed up the entire setup after extracting some kexts into sys/lib/ext. Stupidly, I did not write down what I did when I fixed the problem. I know that I freshly installed High Sierra and that I did post installation with MultiBeast according to this video:
Later on I repeated the same process (as much as I could remember) but I failed over and over again.
I am able to install and run high sierra but GPU won’t work.
Does anyone know how to fix this?
THANKS!
So, the problem I have is with enabling Nvidia drivers. NVIDIA web driver is properly installed and seen in the upper corner but when selected and after reboot nothing happens. The screen is still flickering and system recognizes graphics display 7 mb. Not to mention that I read and tried EVERYTHING! From lilu, nvidiafix, emu64driver etc. Nothing works.
This is my specification:
Gigabyte GA-H270-Gaming 3
Corsair RM Series ATX/EPS Fully Modular 80 PLUS
Core i7-7700K
Crucial Ballistix Sport LT Single DDR4
Gigabyte GeForce GTX 1050 G1 Gaming 2GB GDDR5 3xHDMI
I know that GPU is working and it’s compatible cause I used it on another hackintosh that’s running properly. I compared clover, bios from that machine and set the other (same config) but it won’t work.
However, I managed to enable nvidia drivers when I switched GPU’s but since I didn’t have WIFE, KextBeast messed up the entire setup after extracting some kexts into sys/lib/ext. Stupidly, I did not write down what I did when I fixed the problem. I know that I freshly installed High Sierra and that I did post installation with MultiBeast according to this video:
Later on I repeated the same process (as much as I could remember) but I failed over and over again.
I am able to install and run high sierra but GPU won’t work.
Does anyone know how to fix this?
THANKS!
Last edited by a moderator: