jaymonkey
Moderator
- Joined
- Aug 27, 2011
- Messages
- 4,080
- Motherboard
- GB Z490 Vision D
- CPU
- i9-10850K OC @ 5.2 GHz
- Graphics
- RX6800-XT+UHD630
- Mac
- Mobile Phone
Wooow....It's fixed!, It's embarrassing to say for how long I've been looking to solve this issue
@drizzle,
Glad your up and running ... FYI the solution was detailed in the Lilu + WhatEverGreen guide in post #1 :-
Quote from Chapter 4 :-
Black Screen after booting MacOS or some display connectors not working ?
For most users the Device Properties generated by Hackintool should be enough for WhatEverGreen to correctly configure your IGPU, however on some systems it may be necessary to further modify the framebuffer defaults in oder to get all of the IGPU ports/connectors working correctly. For example you may need change a IGPU port connector from DVI to Display Port or Display Port to HDMI, you can use Hackintool to modify these more advanced settings and then generate updated patch code to add as additional Device Properties to your config.plist.
I wont cover these more advanced settings in this guide as they are already covered in CaseySJ's excellent guide which covers the topic in more detail :-
[GUIDE] General Framebuffer Patching Guide (HDMI Black Screen Problem)
General Framebuffer Patching Guide using Hackintool Please do not quote this guide in its entirety. Post a link instead. 15 Jan 2019: Intel FB-Patcher has been renamed to Hackintool. 19 Jan 2019: Guide overhauled. Please be aware of possible HDMI hot-plug issues. After boot you may have to...
www.tonymacx86.com
Cheers
Jay
Last edited: