I could use some help or advice from you Thunderbolt guru's.
Can hot plug Thunderbolt be enabled on the GA-Z170X-UD5 TH board? I'm on latest OC and have some very weird TB/USB 3 Type C issues happening. Depending on what's plugged in, I get no Thunderbolt unless I have a USB Type C flash drive plugged into the 2nd port. If I plug two OWC bus powered TB adapters in at the same time, neither works. But, If I only have one plugged in, it works IF I have a Type C thumb drive in the other port.... very strange.
I would love to hot plug TB on this machine and be able to use two ports or USB Type-c at the same time. I am attaching my zipped EFI without S/N as well as an IOReg dump, hopefully in the correct format. If it's not possible to Hot plug or use both the OWC Bus Powered M2 enclosures just let me know... The IOReg is with one of the OWC externals and one Samsung 128G USB Type-C attached. I was not sure if the IOReg has serial number in it, and I'm at work on Windows so can't open it to check.