RehabMan
Moderator
- Joined
- May 2, 2012
- Messages
- 181,058
- Motherboard
- Intel DH67BL
- CPU
- i7-2600K
- Graphics
- HD 3000
- Mac
- Mobile Phone
Done
I did previously try but i had some issues with USB3 Ports not working, there was a Bios Update with USB Port fixes which i did update, seems that did fix that existing problem after all.
Successfully created custom usb port injector, after installing USBInjectall.kext (removed fakePCIID.kext & FakePCIID_XHCImux.kext) rebooted and:
4x front USB2 ports on EH02 > PR21:
- HP21
- HP22
- HP23
- HP24
2x back USB2 ports on EH02 > PR21:
- HP25
- HP26
Result: EH02 port completely used with all existing USB2 Ports on their proper place.
EH01 unused, disabled with SSDT-DEH01
XHC Port "8086_1e31", already complete on your SSDT-UIAC-ALL.dsl
4x USB 3 Ports on the back
HS01 - SS01,
HS02 - SS02,
HS03 - SS03,
HS04 - SS04
Each one with 2.0 and 3.0 device working.
USB problems solved.
Disabled the patch
Disabled the patch
Removed the patch
Removed
Added
Removed... no idea what i intended there, when i already have created correct SSDT-ALC221.dsl (forgot to remove the data from config.plist).
Temporary workaround for USB3 Ports to work, now i corrected them.
The problem is, still the Ioreg does take time to load and now it does refresh while i try to save a copy (once or twice) only or if you plug a usb port or something that does change.
Also yes, it does raise the CPU Usage to 100-103%
Otherwise with IoregistryExplorer closed, the cpu usage is 0.0 if nothing opened.
Even though you mentioned that PluginType=1 Power management is not so good on Ivy Bridge, it does look ok on paper, frequency drops to 1600mhz on idle and also turbo boost to it's max turbo boost speed, same for IGPU, lot of stats on AppleIntelinfo.kext test so i assume it should be good ?
Another question, does the CPU fan have available code that can be enabled/tweaked to show fan rpm speed on HWmonitor ?
CPU PM on Ivy requires one of two configurations:
- SSDT.aml from ssdtPRgen.sh (no Generate/PluginType)
- Generate/PluginType=true, KernelAndKextPatches/KernelXCPM=true (no SSDT.aml from ssdtPRgen.sh)
You're using the latter. You might try the former.