kgp
Retired
- Joined
- May 30, 2014
- Messages
- 6,743
- Motherboard
- ASUS WS X299 Sage 10G
- CPU
- i9-7980XE
- Graphics
- Vega 64
- Mac
- Mobile Phone
Fine, now can you switch to /Advanced Configuration/ (F10) and set in /AITweaker/ your "CPU Core Ratio" to "Sync all Cores" as well as the "1-Core Ratio Limit" to 36, in case you do not perform any OC (36 = 3600 Mhz). With "Sync All Cores" you just have to enter the "1-Core Ratio Limit" of 36 for the first core. By this, the new "1-Core Ratio Limit" value should be directly updated for all other cores automatically. Save your BIOS with F7 and F10 and reboot. Subsequently check ones more if your new BIOS settings have been accepted and subsequently boot your macOS Sierra system. Now your system should be able to reach the adequate turbo value configured with ssdtPRGen.sh.
By the way better use "./ssdtPRGen.sh -turbo 3600" and skip the "-a CPU0" flag.
Last edited: