- Joined
- Feb 22, 2017
- Messages
- 24
- Motherboard
- Gigabyte Z170MX-Gaming 5
- CPU
- Intel i9 6700K
- Graphics
- NVIDIA GTX 980 TI
I got USBInjectAll in EFI/Clover/kexts/other.
post 1 from the guide mentions to have it installed to /Library/ExtensionsI got USBInjectAll in EFI/Clover/kexts/other.
Find attached some USB information for my combination of Gigabyte Designare Z390 and Fractal Design Define R6 with Connect D1 (USB-C 3.1 Front):
- Description
- Fractal Design Define R6 with Connect D1 specific SSDT (DSL-format to be used with MaciASL)
Hi, thank you for your answer. I was referring to Thunderbolt! God knows why I wrote Bluetooth!! Sorry!Hi, are you referring to Bluetooth or Thunderbolt? Because “Thunderbolt Local Node” is not currently available on Hackintosh, the Thunderbolt section will always say “No drivers loaded” or words to that effect. Instead, you can check for Thunderbolt devices in the “PCI” section of System Information.
how? maybe i have just not come yet to that point…I had troubles with all the FakeSMC_xxxSensors.kext and removed them. All of the other FakeSMC or FakePCIID* you show I also kept and use.
As per rules, please update your hardware profile to allow others to help you easierAnybody tried to connect iPhone to the Designare z390? I tried with both internal thunderbolts and also with Titan Ridge without any success. In the Thunderbolt part of the System info I see only
Thunderbolt: No drivers are loaded.
but for example eGPU works as expected. And in PCI section I see "Driver installed: Yes" for both:
GC-Titan Ridge Thunderbolt 3 NHI:
Name: GC-Titan Ridge Thunderbolt Controller
Type: Thunderbolt 3 Controller
Driver Installed: Yes
MSI: Yes
Bus: PCI
Slot: Built In
Vendor ID: 0x8086
Device ID: 0x15eb
Subsystem Vendor ID: 0x2222
Subsystem ID: 0x1111
Revision ID: 0x0006
Link Width: x4
Link Speed: 2.5 GT/s
GC-Titan Ridge USB-C:
Name: XHC5
Type: USB 3.1 Controller
Driver Installed: Yes
MSI: Yes
Bus: PCI
Slot: Built In
Vendor ID: 0x8086
Device ID: 0x15ec
Subsystem Vendor ID: 0x2222
Subsystem ID: 0x1111
Revision ID: 0x0006
Link Width: x4
Link Speed: 2.5 GT/s
I have connected -- but using USB, the TB-3 ports don't support it. I tried a USB-C to lighting cable no luck. Others report the same. It works seamless on the USB portsAnybody tried to connect iPhone to the Designare z390? I tried with both internal Thunderbolt and also with Titan Ridge without any success. In the Thunderbolt part of the System info I see only
Thunderbolt: No drivers are loaded.