Gigamaxx
Moderator
- Joined
- May 15, 2016
- Messages
- 6,532
- Motherboard
- GIGABYTE X470 Arous Gaming 7 WiFi
- CPU
- Ryzen R9 3900X
- Graphics
- RX 480
- Mac
It looks very hard, how do I do this? patching or editing my config.plist with Xcode? sorry I'm a rookie
Not too hard. Download Clover Configurator app from Mackie site (google it). Go to TonymacX86 Downloads section in Kexts and get ALCkext and lilukext they have to be used together.
Go to top tool bar and select Finder, then go to Preferences and click, select the box next to Hard Disk. Now all your Drives will show on desktop.
Open Clover Configurator app and select "Mount EFI" select your macOS disk and open. Close the app. Go to the EFI disk icon on desktop and open. Open the Clover folder and right click on config.plist and select "open with" Clover configurator app. go to "Devices" and then go to top right corner and type in 1, or 2 etc.. see pic 1 below. You may need to do this with a few different numbers until you find the right one. You have to reboot for this change to take effect for testing.
Next place the lilu and ALCkext in Clover Kexts folder "Other". See pic 2 below mine doesn't have that but this is where you want these. After doing these two changes reboot with Audio inject set to 1, if it works after reboot great you're done. if not try a different number and reboot to test. Once you find a working number you can put the kexts in Library/Extensions folder. Use KextBeast also in Downloads section here. Place the kexts on your desktop and only these kexts as it will load all kexts on desktop. Make sure to select Library/Extensions for the install target choice. Be sure to remove the kexts from the Clover/Kexts/Other folder before reboot.