HP Elitebook 1050 g1 cannot boot to recovery

[N3kowarrior]

need to see your verbose output image

How do i do that?

 

[Feartech]

How do i do that?

make sure to reset nvram at the opencore picker when you make any changes to your EFI and or bios settings

boot with -v in your boot arguments and take a picture where it stops to upload here, like you done before

and upload your zipped efi

 

[N3kowarrior]

So this is my progress so far

 

[UtterDisbelief]

So this is my progress so far

Disable IntelBluetoothInjector.kext -

<string>IntelBluetoothInjector.kext</string>
<key>Enabled</key>
<true/>

... or you will probably not be able to boot.

Also add BlueToolFixup.kext to get Bluetooth working.

(There's another commonly used kext but I'm not sure it was needed for Monterey. Will detail that later if necessary).

 

[N3kowarrior]

Disable IntelBluetoothInjector.kext -

<string>IntelBluetoothInjector.kext</string>
<key>Enabled</key>
<true/>

... or you will probably not be able to boot.

Also add BlueToolFixup.kext to get Bluetooth working.

(There's another commonly used kext but I'm not sure it was needed for Monterey. Will detail that later if necessary).

Thank this took me further in the boot process but i still got stuck. I also disabled uneccesary aspci files i had in config.plist and their patches patches. Also i connected my laptop by usbc-to ethernet adapter to ethernet.

 

[N3kowarrior]

Maybe should i try install Big Sur and then update?

 

[N3kowarrior]

No progress at all.

 

[UtterDisbelief]

Thank this took me further in the boot process but i still got stuck. I also disabled uneccesary aspci files i had in config.plist and their patches patches. Also i connected my laptop by usbc-to ethernet adapter to ethernet.

Hi there.

Well I only noticed a couple of things in the latest EFI folder:

1) I would still include an AWAC SSDT. If you haven't already, create a fresh one using SSDTTime for your laptop

2) No need to have the XhciPortLimit quirk enabled if you are using the UTBMap.kext.

3) There are two versions of UTB configurations - one that uses the USBToolBox.kext and one that does not. Which is yours?

4) I've taken a look at the UTBMap.kext iand it looks very wrong for a laptop. 16x HS ports and 10x SS ports?!

By the way - just saying "No progress at all" doesn't tell us enough about what you tried and where it failed. Was this on the install of Big Sur?

 

[N3kowarrior]

Hi,
Am sorry for short and non verbose update. I tried but it failed on diskutility not starting i cant say for sure.But log said something about failing then it hanged.

Yes this is image of attempt to install big sur. I tried playing around with it once launched to black screen like it was starting GUI but it crashed my laptop. It produced same error as if I holded down power button for 5sec.

I don't remember how I made UTBMap ill remake it.
Also to add to the pile i have wrong audio configuration.

Thank you very much for the response ill update soon.

EDIT:
Remade UTBMap.kext
USBToolBox.kext is needed am adding it rn

It goes to black screen after spewing some logs i cant really capture,than power down my laptop. It doesnt even create output txt file.

 

[N3kowarrior]

I tried to experiment with boot agrs and it had worse/none outcome.