Contribute
Register

How to extend the iMac Pro to X99 [Successful Build/Extended Guide]

Status
Not open for further replies.
kgp said:
Well there a several people successfully running 2x Vega 64 under High Sierra and Mojave, but certainly not in SLI compound!
Click to expand...
MasterKGP, Im almost done it seems, everything is working perfectly with one Video Card, I have only two issues left, The Wifi is not showing in the network pref, and when it sleeps it just starts again automatically to the same session no restart, if you can help with those 2 issues that would be appreciated, thanks
 

Attachments

  • 3.png
    3.png
    172.4 KB · Views: 95
  • 2.png
    2.png
    17.1 KB · Views: 84
  • 1.png
    1.png
    20.8 KB · Views: 80
hossam.sy said:
MasterKGP, Im almost done it seems, everything is working perfectly with one Video Card, I have only two issues left, The Wifi is not showing in the network pref, and when it sleeps it just starts again automatically to the same session no restart, if you can help with those 2 issues that would be appreciated, thanks
Click to expand...

I am on holidays until Wednesday next week, my friend..
 
  • Like
Reactions: GDS
cocoanut said:
Hi,@KGP.I do not know how to complete the CP->PR replacements.Could you help me?:)

Motherboard:MSI X99A-RAIDER
CPU:Intel 6800k
Graphics:ZOTAC GeForce GTX 1060-6GD5 X-Gaming OC
Click to expand...

@cocoanut: have you read E.9.1), par. f) ? I modified mine after @kgp 's suggestion in #2229, but didn't upload the updated config.plist. sorry.

so, open your config.plist with clover configurator, section "ACPI". add the other patches under "DSDT".

ACPI - DSDT
Comment: Find*[Hex] Replace [Hex]
CP00 -> PR00 43503030 50523030
CP01 -> PR01 43503031 50523031
CP02 -> PR02 43503032 50523032
CP03 -> PR03 43503033 50523033
CP04 -> PR04 43503034 50523034
CP05 -> PR05 43503035 50523035
CP06 -> PR06 43503036 50523036
CP07 -> PR07 43503037 50523037
CP08 -> PR08 43503038 50523038
CP09 -> PR09 43503039 50523039
CP0A -> PR10 43503041 50523130
CP0B -> PR11 43503042 50523131
CP0C -> PR12 43503043 50523132
CP0D -> PR13 43503044 50523133
CP0E -> PR14 43503045 50523134
CP0F -> PR15 43503046 50523135
CP10 -> PR16 43503130 50523136
CP11 -> PR17 43503131 50523137
CP12 -> PR18 43503132 50523138
CP13 -> PR19 43503133 50523139
CP14 -> PR20 43503134 50523230
CP15 -> PR21 43503135 50523231
CP16 -> PR22 43503136 50523232
CP17 -> PR23 43503137 50523233
CP18 -> PR24 43503138 50523234
CP19 -> PR25 43503139 50523235
CP1A -> PR26 43503141 50523236
CP1B -> PR27 43503142 50523237
CP1C -> PR28 43503143 50523238
CP1D -> PR29 43503144 50523239
CP1E -> PR30 43503145 50523330
CP1F -> PR31 43503146 50523331
CP20 -> PR32 43503230 50523332
CP21 -> PR33 43503231 50523333
CP22 -> PR34 43503232 50523334
CP23 -> PR35 43503233 50523335
CP24 -> PR36 43503234 50523336
CP25 -> PR37 43503235 50523337
CP26 -> PR38 43503236 50523338
CP27 -> PR39 43503237 50523339
CP28 -> PR40 43503238 50523430
CP29 -> PR41 43503239 50523431
CP2A -> PR42 43503241 50523432
CP2B -> PR43 43503242 50523433
CP2C -> PR44 43503243 50523434
CP2D -> PR45 43503244 50523435
CP2E -> PR46 43503245 50523436
CP2F -> PR47 43503246 50523437

the usb patch must be updated too, since EFI I shared is for 10.13.6/broadwell e/iMAC PRO:
open your config.plist with clover configurator, go to "kernel and kext patches", under "kextstopatch" find
Name: AppleUSBXHCI
Find: 837D880F 0F83A704 0000
Replace: 837D880F 90909090 9090
Comment: USB 10.13.6+ by PMHeart
MatchOS: leave empty

:wave:

 
josh-x00 said:
if you want to discover, try this:
when clover starts, go to option > binaries > kext/kernel patches and uncheck one of them. then go back to start menu hitting enter on return, and start HS. write your combinations: which patches are necessary and which are not to make the system start. if something breaks, don't worry: your tries are not written in config.plist, they are temporary, just for the single run. so, restart. it'll work.
when you find your pivot, the patch/es without which hackintosh breaks, test again, then share ;)
Click to expand...
@branana, I forgot to tell you to adjust your CP > PR replacement, as said to me by @kgp in #2229, and also USB patch for 10.13.6. look at #2292 :) :wave:
 
josh-x00 said:
@cocoanut: have you read E.9.1), par. f) ? I modified mine after @kgp 's suggestion in #2229, but didn't upload the updated config.plist. sorry.

so, open your config.plist with clover configurator, section "ACPI". add the other patches under "DSDT".

ACPI - DSDT
Comment: Find*[Hex] Replace [Hex]
CP00 -> PR00 43503030 50523030
CP01 -> PR01 43503031 50523031
CP02 -> PR02 43503032 50523032
CP03 -> PR03 43503033 50523033
CP04 -> PR04 43503034 50523034
CP05 -> PR05 43503035 50523035
CP06 -> PR06 43503036 50523036
CP07 -> PR07 43503037 50523037
CP08 -> PR08 43503038 50523038
CP09 -> PR09 43503039 50523039
CP0A -> PR10 43503041 50523130
CP0B -> PR11 43503042 50523131
CP0C -> PR12 43503043 50523132
CP0D -> PR13 43503044 50523133
CP0E -> PR14 43503045 50523134
CP0F -> PR15 43503046 50523135
CP10 -> PR16 43503130 50523136
CP11 -> PR17 43503131 50523137
CP12 -> PR18 43503132 50523138
CP13 -> PR19 43503133 50523139
CP14 -> PR20 43503134 50523230
CP15 -> PR21 43503135 50523231
CP16 -> PR22 43503136 50523232
CP17 -> PR23 43503137 50523233
CP18 -> PR24 43503138 50523234
CP19 -> PR25 43503139 50523235
CP1A -> PR26 43503141 50523236
CP1B -> PR27 43503142 50523237
CP1C -> PR28 43503143 50523238
CP1D -> PR29 43503144 50523239
CP1E -> PR30 43503145 50523330
CP1F -> PR31 43503146 50523331
CP20 -> PR32 43503230 50523332
CP21 -> PR33 43503231 50523333
CP22 -> PR34 43503232 50523334
CP23 -> PR35 43503233 50523335
CP24 -> PR36 43503234 50523336
CP25 -> PR37 43503235 50523337
CP26 -> PR38 43503236 50523338
CP27 -> PR39 43503237 50523339
CP28 -> PR40 43503238 50523430
CP29 -> PR41 43503239 50523431
CP2A -> PR42 43503241 50523432
CP2B -> PR43 43503242 50523433
CP2C -> PR44 43503243 50523434
CP2D -> PR45 43503244 50523435
CP2E -> PR46 43503245 50523436
CP2F -> PR47 43503246 50523437

the usb patch must be updated too, since EFI I shared is for 10.13.6/broadwell e/iMAC PRO:
open your config.plist with clover configurator, go to "kernel and kext patches", under "kextstopatch" find
Name: AppleUSBXHCI
Find: 837D880F 0F83A704 0000
Replace: 837D880F 90909090 9090
Comment: USB 10.13.6+ by PMHeart
MatchOS: leave empty

:wave:
Click to expand...
@josh-x00,very thank your reply. My CPU is 6800K,and yours is 6850K. Do I need to make some changes in the CP PR that you posted?:)
 
cocoanut said:
@josh-x00,very thank your reply. My CPU is 6800K,and yours is 6850K. Do I need to make some changes in the CP PR that you posted?:)
Click to expand...
no @cocoanut, as @kgp said in #2229, replacement goes for all unpopulated cores. so, replace all.
remember to update USB patch too.
:)
 
cocoanut said:
Hi,@josh-x00.My cpu is different from you.So the 48 CPxx -> PRxx replacements may be different from your EFI.Meanwhile,my PCI Device Implementation is incorrect,Could you help me?Thanks:)
View attachment 346527
Click to expand...
@cocoanut, if you still can't implement Nvidia audio device, go here: https://github.com/toleda/audio_hdmi_amd-nvidia.
download this .zip https://github.com/toleda/audio_hdm...er/ssdt_hdmi-nvidia/ssdt_hdmi-nvidia-BR3A.zip and follow instructions.
I send you mine, maybe it works also for you.
:wave:
 

Attachments

  • SSDT-HDMI-NVIDIA-BR3A.aml
    489 bytes · Views: 88
@josh-x00.I removed 10.13 Installer/Updater essential，and works fine:)
 
Status
Not open for further replies.
Copyright © 2010 - 2024 tonymacx86 LLC
Back
Top