- Joined
- Nov 29, 2016
- Messages
- 142
- Motherboard
- Dell Inspiron 15R N5110 (Clover UEFI)
- CPU
- i7-2670QM Quadcore 2.2 GHz ~ 3.10 GHz / HM67
- Graphics
- Intel HD Graphics 3000 + Nvidia GT 525M , 1366x768
- Mac
- Mobile Phone
@UtterDisbelief @Feartech @RehabManGenericUBXHCI.kext will not stop your laptop from booting, but removing the other kext might. Never remove anything from S/L/E.
If you still have your bootable USB installer drive you can boot that as though you were going to re-install, so select External, but instead of running the installer go to the Tools menu and use Terminal to replace your kext. This involves using some Terminal commands but copying from the desktop into S/L/E is not too difficult.
Otherwise we need @Feartech back again because he's the Laptop wizz around here
Good News. I renamed, moved and fixed permissions in single user mode and booted successfully. Everything is back to normal.
Removing AppleHPET.kext and using GenericUSBXHCI was suggested by many for 6-series/c200 to make USB 3 ports work specially with Texas TUSB73x0 USB 3, but in my case it left me with kernel panic with macOS Sierra 10.12.6
Now, I tried to use Hackintool to discover ports but using GenericUSBXHCI instead of USBInjectAll, Cause i was only able to read USB drivers via USB 3 ports using GenericUSBXHCI.
Hackintool gave me same result. same ports, nothing new. But, Finder & IORegistryExplorer were able to read USB 2 & USB 3 drivers via USB 3 ports, unlike USBInjectAll.
I figured that GenericUSBXHCI makes USB 3 ports read USB 3 drivers with no write. Every time i try to copy or paste gives me error -36 in finder. But also makes USB 3 ports act as USB 2 ports to read/write USB 2 drivers & i'm able to copy/paste normally.
Basically, Using GenericUSBXHCI with my 6-series/c200 allows USB 2 ports to read/write both USB 2 & USB 3 drivers, but allows USB 3 ports to read/write USB 2 drivers & read only USB 3 drivers.
On the other side, Using USBInjectAll with my 6-series/c200 allows USB 2 ports to read/write both USB 2 & USB 3 drivers, but makes USB 3 ports unusable.
What should i do now?
Last edited: