usb 3.0

Hello all, Finally have my Hackintosh running great, but have one minor issue. I installed the USB 3.0 kext from Multibeast 5.4.1 and was pleasantly suppressed to find I now have the front case USB 3.0 ports working just fine (tested an external 3.0 Seagate drive and saw read/write 160 MBps...

Hi guys, i installed the USB 3.0 driver from MultiBeast 5.4.3 on my late 2011 MBP in order to use my USB 3.0 Express Card, and every time i unplug this express card from the mac, i need to send the MBP to sleep and then wake up in order to see the express card again. Could you guys help me...

An upcoming video project demanded the use of USB 3.0 on my current workstation, but my (now ancient) GA-P55M-UD2 mobo maxed out at USB 2.0 Scouring forums and posts led to the recommendation for the following *PCI-X2* expansion card from Amazon.com ORICO PFU3-2P Dual Port MAC USB 3.0 PCI...

I recently purchased a USB 3.0 Seagate 500 gb portable Slim drive for Mac thinking it would be a sweet replacement for my failing USB 2.0 portable drive. I set the device up on my MacBook Pro and thought nothing of it a few weeks ago. However, when I connect the device to my Hackintosh it's as...

Hi all, I'm in the middle of planning my G5 Mod (no cutting if possible) and I just found something that might make life a little easier for those who want a no-cutting solution or USB 3.0 rear-jacks. These are front-panel or rather top panel replacement-connectors for the BitFenix...

Hi, I have a GA-H77N with i3 3225. My problem is that my usb 3.0 ports and 2.0 work fine but when I put a 2.0 device in a 3.0 port then it doesn't power it and detect it. I'm not bothered about 3.0 to be honest, but if I can keep it it would be nice. How do I fix my issue? Thanks E.

Hello there. I´m having some Sleep and USB 3.0 problems. Sleep problem: I have ensabled all checkboxes under energy saving. Thats all. Then i activate sleep from the Apple menu it shuts down just fine, fans, HDD and everything. And when i tray wakeing it up again by pressing a key on mouse or...

I am running ML on a GA-Z77X-UP5 TH motherboard. I installed the new USB 3.0 drivers using Multibeast 5.3.0 and for some reason my 500GB passport keeps disconnecting. With and without the driver, the passport connects and I am able to use it but after a few minutes, it disconnects and I get an...

My system is completely stable and has been for almost a year now but I got 2 USB 3.0 Drives and would really like to take advantage of the speed boost but I just don't even know where to start with USB 3.0 drivers. I figured its been long enough so there must be support for it on my motherboard...

I know that we have beat this to death. but is there any possible solution to what seems a simple fix for USB 3.0? I have had it working perfectly for the record using the three kext changes. I would like to simply just use the PXHCD.kext only. Is there anyone out there who has figured this...

Hey guys. I finally managed to install OS X on my computer. It has a GA-X58-USB3 motherboard and a GT 520 graphics card which I had lots of trouble installing, but finally it worked out for me. NOW, my problem is that I cant get the USB 3.0 ports to work. I can get them to work at USB 2.0...

NEC / Renesas USB 3.0 Controller (Laptop Internal) [RESOLVED] Thanks to this forum (and some others), my Dell Inspiron 17R N7110 laptop has been up and running 10.8 great for a while. No critical issues. I plan on posting a guide but want to wait until I try updating to 10.8.3 and see how...

(SOLVED) USB 3.0 behavior + Via Labs VL811 USB3 hub chip (GA-z77x-ud5h rev. 1.1 mobo) SOLVED (See last post) As far as I know my questions do not pertain to the GA-z77x-ud5h rev. 1.0 mobo as it uses the Via Labs VL810 USB hub contoller chip. Also as of 2 weeks ago I am new to all of this and...

I just built my first Hackintosh, thanks to this site and your forums it was a breeze and I now have a very fast machine for the fraction of the cost of an iGash, plus I didn't have to help fund the evil empire so I sleep better at night. However, when I plug my Buffalo Ministation 3.0 (2.5"...

I used the normal install way with unibeast and then multibeast for post work. My system works 100% expect for USB 3.0 i selected the USB 3.0 driver in multibeast with lets OSX ML see the ports but when used it locks the computer up and gives me kernel panic. IS there a fix for this ? Also to...

I've had my hackintosh for less than a month, and I recently decided to get my USB 3.0 working on it. Not for the speed, but because the ports on the front of my case are 3.0, and I want to charge my iPhone with those. I installed the CalDigit 3rd party drivers with Multibeast, and now, I...

[Solved] CalDigit USB 3.0 kexts from Multibeast breaks sleep functionality on my ASUS P8Z68-V Pro Gen 3 Hi, I've been working for the past couple weeks trying to get USB 3.0 working on my Asus P8Z68V-PRO Gen3 mobo. Luckily the new Multibeast makes enabling USB 3.0 pretty easy but it breaks...

Making NEC USB 3.0 Card Fully Comportable with Original MAC Drivers [CalDigit, LaCie, Sonnet, Oyen] So, Now We can to change Subsystem Vendor ID and Subsystem Device ID for Your NEC/RENESAS USB3 Controller on chip (uPD720200 & uPD720200a) for uPD720201/uPD720202 - check my post attachment #36...

Hello so I am going to build the the "CustoMac Mini Deluxe" . I just have a few questions and tips needed that my searching has not helped with. GIGABYTE GA-H77N-WIFI - Will the wi-fi work? - Because of compatibility problems with USB3 and USB2 devices should I choose only to use...

Hi, here are my configurations: - ASUS P8Z77-V LX motherboard - intel i5-2500k LGA 1155 processor - 8 GB RAM 1600 mhz I installed Mountain Lion using Unibeast + Multibeast 5.0.2. I used EasyBeast and NullCpuPowerManagement.kext because the patched AppleIntelCpuPowerManagement. kext...