usb 3.0

Hey everyone, I have a problem with my Asmedia 1042 USB 3.0 controller, that doesn't work in Yosemite. USB 3.0 only works if i insert the USB device before my laptop is even on. It has to be attached when my pc is booting up. Otherwise it gives this error: "32,000 kernel[0]: USBF: 3.168...

nstall (as Upgrade from Mavericks) worked fine... now having issues with both USB3 and iPhoto update. Any help on either would be appreciated. USB 3.0 I have a PCIE card with a UDPD720200 chipset. I used the GenericUSBxHC.kext from multibeast, and took the advice in this thread and also...

Hey everyone! Long story short: 1/ I’ve been through 3 macs this year, my 13” MBP, my 17” MBP and now my 15” rMBP. 2/ In between my 17” and 15” I installed the tonymacx86 USB 3.0 drivers on my 17” machine in order to make the USB 3.0 ExpressCard I bought work with my USB 3.0 devices. 3/...

I've been digging around on a few hackintosh sites, but to no avail. Like many people I couldn't not get all the USB 3 ports to work. Sometimes, after turning the computer on or reboots, the ports would work, drives would mount with no problem. However, most times, it would not recognize any...

Hello all, I have been using an external hard drive with 3.0 capabilities for a while but only at 2.0 speeds. My 3.0 ports do not seem to be working. I installed the 3.0 driver in multibeast as well as attempting some other ones I found that were for a real mac. I can plug an ilok into the...

Hey guys, I've been a tonymac user since around February when I made my first mac rig. Everything went along well - I installed Mountain Lion. It wasn't compatible with the version of Avid Media Composer that I use so I instead installed Mavericks, which went off without a hitch. Everything...

Hey everyone, i'm really new to having a hackintosh and have only had one for about 24 hours now. As much as I love it, I am having a big problem with my USB 3.0 ports. None of them work. I am running OSX 10.9.3 Mavericks and have installed the USB 3.0 fix from multibeast already. I have an Asus...

I'm having a curious issue with Mavericks. My first installation on this rig went flawlessly. Everything pretty much worked out of the box and only a few kexts needed to be installed. However, the OS became corrupted and necessitated a reinstall. Since then it's been giving me a lot of issues...

SafeSleeper I wrote this app a while back. Feel free to download and use it as a work around for USB drives that get force ejected at sleep. SafeSleeper will properly eject all USB drives and put the computer to sleep. It will detect and warn you if a network connection like File Sharing is...

have hackintosh 10.9.2 and list of parts listed below Z87x-UD5H has 6 usb 3.0 ports 8GB Ram (Probably going to upgrade to 16gb soon) i5 4670K (not overclocked) 120gb Kingston Hyperx ssd (also have installed 128gb msata seeing if i should raid0 for boot) 2TB Portable canvio connect usb 3.0...

Hi, I've been searching through the forum posts on booting from a USB 3.0 HDD and it seems like this was not possible a couple of years ago. Has anything changed? My understanding is that the ability to boot from a USB 3.0 HDD is dependent on the BIOS. More specifically it's dependent on the...

Drive Failure or USB 3.0 problem? GA-B75M-D3H After my Time Machine Backups started to fail I noticed my USB 3.0 Hard drive was not writing as fast as it should. Not sure if this has anything to do with 10.9.2 but didn't notice it until afterwards. The drive could be failing but not sure what...

Hello, I'm a newbie here and I just finished installing Mac OS 10.8 on my PC. My PC has the following configuration: Intel Core i7 3770 CPU On-board Intel 4000 HD GPU Gigabyte GA-H77N-Wifi Motherboard 4 GB RAM 1 TB Seagate Barracuda Hard Drive Mac OS X 10.8 Mountain Lion I did not use any...

Hey Folks!! First off wanna thank all the community especially Tonymac, and Toleda, whose's posts have made me go thru many successful installations! Of course many people have worked hard for us to get at this point, and I'd like to thank them all!! Now, lets go to business...

I can see from this forum that I'm not the only one who has USB 3.0 problems. Thanks in advance to anyone who can offer some insight into my specific issue. I'm having trouble with multiple USB 3.0 G-RAID drives. They are fully functional out of the box--I have connected them first to my 15"...

I'm having some trouble getting any USB 3.0 external drives to mount using my USB 3.0 ports (they seem to mount fine thru USB 2.0). They don't show in diskutiliy or in my sys-info. I have a Lacie Rugged HDD and an older WD My Book, both of which mount on non-hackintosh macs. I'm not...

My mobo is gigabyte z68xp-ud3 and the usb 3.0 ports work fine with external HDD USB 3.0. But after wake from sleep, they do not recognize the HDD. I am using the latest GenericusbXHCI.kext version 1.2.7

Have had issues with USB 3.0 working then not working. The fix that works seems to be a CMOS reset and everything is good for a while.

I have a 2008 MacBook Pro running Mountain Lion. I purchased a GMYLE ExpressCard 34 to USB 3.0 adapter with the intention of being able to read CF cards faster than USB 2.0 speeds. When I install the adapter into my expresscard slot, I get an icon in the menu bar that has two options: USB...

Hey Folks, just figured out that the Inatek KTU3FR-4P works out of the Box with my hackintosh. I just plugged it in and it works with fully USB 3.0 Speed. This Controller works with the Fresco FL1100 Chip. My Board is a quiet old Asus P5Q Pro. Nice... :)