Gigabyte Gaming 7 z370 Mobo.
Just recently switched to a dual RX 580 setup to run 6 monitors. I got it working however with 2 graphics cards AND my Alpine Ridge thunderbolt card it won't boot. If I remove the thunderbolt card it will work just fine.
I am running F10 bios. I've tried removing...
So i just upgraded my hackintosh's hardware and thought that Mojave would be a piece of cake, now that i left the Gtx980 behind.
Anyway, i used unibeast for the USB, erased and formated, my 960 Pro Samsung 512GB, to APFS..But when the i stallation is about to begin, the screen...
I have been trying like crazy to get this one working for weeks, but all the patches seem not to be working...
Everything works except USB port limit and Graphic acceleration. Even the quadro is working without nvida web drivers. I can see both GPUs in the SystemInformation app, but...
Internal HDD WD Red 8TB not showing up after reboot HS 10.13.6.
It Shows up on the first startup of the computer.
But then if i restart the computer the HDD disappears.
Then for it to show up i have to shut down the computer and then turn off the power supply to the computer and then when i...
Before I start, i'll like to say attached are the file needed to get your card working and this is my way of giving back to the institution and the people that has helped me a lot (i say " thank you").
1. Open Kext Utility App in the folder and drag IO80211Family.kext in the Kext Utility App...
First of all, this is my first hackihtosh so Im sorry if this is a dumb question. But I think that all my installed kexts and drivers are not working. I installed all of them with KextBeast to /Library/Extensions, didn't work. I tried just dragging them to /EFI/CLOVER/kexts/other, didn't work...
I'm working on my first build and trying to get everything working. Now I've run into something strange. The system won't start with power connected to the GPU but it will start fine without or with just one cable connected.
I've followed the installation guide and installed macOS Mojave...
I've been trying to instal Mojave on my configuration for weeks now and I can't seem to get it up and running. I have tried Vanilla and Unibeast method with different variations of kexts and drivers in the EFI folder but nothing seems to work.. I have made it to the Welcome screen...
Using the Gigabyte mobo in my profile; I have no problem getting the OS to recognize the audio chip set, but when I hook it up to an external amplifier via the stereo audio jacks, I get a ton of digital noise in the audio - in fact it's often louder than the actual audio.
This mobo has the...
I'm trying to do my very first hackintosh on this machine and so far, i've only got stuck with apple logo on boot (before install). I've tried a bunch of configurations and i'm always getting stuck at End RandomSeed+++++++++++++++++.
I've also unplugged all hard drives and have...
I have a Hackintosh running the latest version of Mojave, yesterday I thought it was a great idea to update my bios, so i took the latest version available on the gigabyte website (F1 to F11). After the update, I did set all the bios setting as they were before the update, but...
My Machine config is :
Intel Core i5 9400F
Gigabyte Z390 Aorus Pro Wifi
8GB x 2 Corsair Vengeance DDR4 3000 mhz Ram
Zotac GTX 1060 Amp! Edition 6GB Graphic Card
1TB Seagate Baracuda Hard Disk
Corsair Spec Delta Atx Cabinet
In the above mentioned config system, i have been successfully...
This is my first Hackintosh and I have a problem with MultiBeast. I got a "GIGABYTE GA-H110M-S2H" Mainboard with a "Realtek ALC887" Audio Chip inside. But Multibeast doesn't show it in the Audio Drivers. Does anyone know why that could be?
Thanks for every answer.
LG, Domi :)
I used the latest Unibeast for boot usb (mojave), I have set everything in bios as written and the installation went well then it is stuck on the first boot many times. Anyone can help? Here is the log:
Gigabyte z270 Gaming, MSI RX580 8GB, Intel i5 7600K, 16GB ram, Samsung 850evo 250gb
I have a Sandisk SSD with Mojave running ok and I bought a Samsung 960 EVO m.2. I've used CCC to clone SSD to m.2 and restart. So, until this I could start Mojave from m.2 normally. Clover was in SSD EFI until this.
After this, I installed Clover in m.2 EFI and move all files from...
hello. I have just purchased a gigabyte h310 d3 motherboard, a core i5-8400 8th gen processor and 1x 8b cmv8gx4m1a2133c15 corsair ddr4 memory. I successfully installed windows on an ssd but when installing high Sierra using clover with the recommended bios settings, I manage to load start the...
This is my first attempt at a Hackintosh and I have searched extensively, but unfortunately I cannot find a solution, so i was hoping someone could help me, please.
I have a Gigabyte z370HD3P which I have flashed with the most recent firmware (F11b), the processor is a i7 8700 and the...
Hi!I want to build a hackintosh.
My specs are: Gigabyte GA-H55M-UD2H rev1.3 with bios F11
8GB RAM DDR3
Processor Intel i5 750
I tried Unibeast method and at booting says: "Loading operating system" and stuck.What I need to do to make it work?
My problem is i can’t start from usb. I tested with High Sierra and Mojave and it does not start. I tried to create the usb using the macOS and unibeast terminal. Nothing works. I have followed many guides, none has helped me. Can someone tell me what could be the reason? Thanks for all