Okay I know this topic has been touched on before on the forums but I need someone to really help me! I've had this version of the LifeHacker MB originally with Snow Leopard since 2009 and its a really good build! I want to upgrade it to 10.8. I've read that there's people who have done it with...
Hi,
I just finished installing Mountain Lion on my laptop, following the 10.8 Installation guide.
I've been having some issues with is as its expected, I tried Multibeast for mountain lion and still not getting ehternet, audio and/or graphics.
Intel® CoreTM i3 processors
6GB...
FIXED! Ga-Z77-DS3H Mouse and keyboard not working in Mountain lion 10.8.0 - 10.8.3
Hello
I just finished building my first hackintosh! I installed Mountain lion 10.8 with Unibeast and Mountain lion from the app store, and everything went smooth! Until I rebooted After Installing 10.8.3 combo...
Hello All,
I figured I'd spend the day trying to get Mountain Lion set up on my new rig. I have everything working (graphics, audio, networking, sleep, etc) with the onboard HD4000 graphics. The problem comes in when I plug my HD7950 in and try to boot. I get a boot0 error screen as seen...
I have been running an EXPI9301CTBLK Intel Gigabit CT Desktop Adapter NIC in Lion for a couple of years. I did have to add it's device ID to IONetowrkingFamily.kext each time I did an OS update which was a bit of a hassle but the thing was rock solid. Upon upgrading to Mountain Lion, I found...
[SOLVED] Dual monitors dvi - hd radeon 6870 / 10.8 Graphics Enabler=Yes
I want to have 2 monitors working on DVI with my Radeon HD 6870 graphics card.
I know its possible with some changes but I haven't found a solution for 10.8
I want my GraphicsEnabler=Yes (Because I need a fully working...
Hey guys! First i have to thank for the nice work here with all the programms.
I created a usb drive with Unibeast for Mounten Lion...all worked fine in my VMWare. Now i want to install ML...but after the grey-apple logo, my monitor says "no signal". Searched here in forum and found sth: i...
After trying everything I could think of and look up I hope that someone on here can help me out.
Basic Hardware:
Gigabyte z68x-ud3h-b3 Motherboard - Bios Version F5e
EVGA 570
8gigs of DDR3 ram
When I first install Mountain Lion I have no issues. Everything works great, including...
hi all. i was running 10.7 hackintosh on a dell vostro 430 with no problems. i had several backups via time machine.
now i tried in a separate hd and istalled 10.8 and is going fine.
the problem came out when i try to restore a backup from time machine via migrating assistant from 10.7 to new...
UPDATE: Thanks for the recomendations, finally get it working on the HD4000 HDMI, the problem was my TV (Philips model) who was not recognized. Borrowed an HDMI monitor and everything is OK now. Will see how I will do it for the TV, probably an adapter HDMI to DVI... Thanks again.
Hi Guys...
Hi,
I have an intel DP35DP motherboard in my hackintosh and I have successfully ran 10.5, 10.6 and 10.7 through the years.
For some reason, on 10.8 (mountain lion) the audio is broken. In 10.7.5 I use VoodooHDA.kext 2.7.0 + SSE2 checked in the system preferences (that comes with VoodooHDA)...
Hey guys, running into some trouble that I've never seen before.
So I was able to get ML installed by using the Onboard graphics and -x.
After it installed (before desktop) I put in my 6870 and tried to boot. It gives me the the white screen with the cursor. So I tried GE=No and PCI=0 and...
Hello Everyone,
Please read before bailing on the thread...I'm aware that OSX won't install to an Intel softraid array. Thanks in advance for any help!
I'm attempting to install Mountain Lion on my DV6t-7000 Quad but I'm stuck in disk utility because it doesn't see my drives. I'm...
Hi there,
I'm not quite sure if this is in the correct forum but this is my best guess.
I can only boot up using these flags:
PCIRootUID=0 GE=No -x -v
I seem to get stuck at the ATY_Init phase:
http://d.pr/i/ouHR/16yKc2Gr
I've deleted OemSMBIOS.kext from the FakeSMC.kext because it...
Hi there,
I'm not quite sure if this is in the correct forum but this is my best guess.
I can only boot up using these flags:
PCIRootUID=0 GE=No -x -v
I seem to get stuck at the ATY_Init phase:
http://d.pr/i/ouHR/16yKc2Gr
I've deleted OemSMBIOS.kext from the FakeSMC.kext because it...
My Rig:
Z77N-Wifi
2500K (Using HD3000 as GFX)
2 SSD's
Bitfenix Prodigy
I'm pretty sure thats all you guys should need to know, if you need more ask...
So my problem comes post installation of 1.8... I get it installed on a SSD, and boot into it off of my unibeast thumb drive. I...
Just wondering has anyone got this or a similar configuration working?
I have tried to replace the ATI6000 connector.kext method but no joy. My graphics card produces a picture but does not allow me past the login screen. I can no longer use my mouse or keyboard at the login screen...
Processor 3.19 GHz Intel Core i5
Memory 8 GB 1600 MHz DDR3
Graphics Intel HD Graphics 2000 64 MB of Shared System Memory
Software OS X 10.8.2 (12C54)
So I have the Graphics card that needs the
Special Instructions for AMD 6xxx Graphics Cards:
There is an issue with AMD 6xxx cards...
I have been having a very difficult time trying to get ML to boot without a persistent black screen on my X58 system.
I know that there have been quite a few reports here and elsewhere of black screen at boot issues, but I have been unable to solve this and I need help.
My specs for this...
Im having real trouble getting mountain lion to startup.
everything went fine to start with. it installed fine, i was able to boot into my install and run multibeast.
but after that iv had no luck. when i select my mountain lion disk it starts listing kexts on the screen.
after about 17 pages...
This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
By continuing to use this site, you are consenting to our use of cookies.