Contribute
Register

How to extend the iMac Pro to X99 [Successful Build/Extended Guide]

Status
Not open for further replies.
New EFI-Folder attached at the bottom of the originating post/guide

EFi-Folder related modifications:
  • Implementation of Clover Boot Loader Clover_v2.4k_r4359

Enjoy and have fun :thumbup:

kgp.png
 

Attachments

  • EFI-X99-10.13.2-Release-161217.zip
    17.5 MB · Views: 486
Success using your 10.13.2 EFI folder to create a bootable Clover/HS USB-installer & upgrade from 10.12.6 (including APFS conversion). Using NullCpuPowerManagement for now, will try without it at some point.

Cpu: 5820K (OC'd to 4.5)
Mobo: ASUS X99-A USB31
Graphics: Gigabyte NVIDIA 980GTX

Geekbench3 CPU ~28000 and CinebenchR15 GPU ~118FPS ... exactly as before with Sierra, no change.

Thanks a lot for sharing @kgp, much appreciated.
 
Where i can fiind this setting AVX-512 Instruction Core Ratio Negative Offset ?
 
cristibest said:
Where i can fiind this setting AVX-512 Instruction Core Ratio Negative Offset ?
Click to expand...

So, I see the AVX Instruction offset, but not the AVX-512 Instruction Core Ratio Negative Offset.....is this part of the patched bios?
 
mm2margaret said:
So, I see the AVX Instruction offset, but not the AVX-512 Instruction Core Ratio Negative Offset.....is this part of the patched bios?
Click to expand...
Me too. Just AVX Instruction offset setting. I have patched bios.
 
Hello
I also have a Firewire Card in my system. How would I go about SSDT patching this one as well. If this is not the right thread, I would be happy to get a hint where to get help.
Find attached a screen shot of how the Firewire cards shows up in IO.
Thanks, Mike
 

Attachments

  • Bildschirmfoto 2017-12-18 um 23.49.48.png
    Bildschirmfoto 2017-12-18 um 23.49.48.png
    796.2 KB · Views: 158
Block this Point with this code error!
 

Attachments

  • IMG_20171219_202942.jpg
    IMG_20171219_202942.jpg
    3.2 MB · Views: 210
  • IMG_20171219_202935.jpg
    IMG_20171219_202935.jpg
    4.1 MB · Views: 202
Can I get a Hackintosh guide for HP Z840 workstation
specification
Dual LGA2011 i am using single xeon E5 6 core Haswell CPU
Intel® C612 Chipset
16GB DDR4 ECC RAM
Realtek ALC221
nvidia Quadro K4200 (May work or not i dont know Geforce card available)
Intel® I218LM GbE LAN
1TB HDD no SSD
ACHI Controller May be HP or Intel

I have attached Full specification below you can see it..
 

Attachments

  • c04400043.pdf
    1 MB · Views: 296
Last edited:
customac
Z97-PRO(Wi-Fi ac) |  i7 4790 |  Radeon R9 290x
Build 2
H370M D3H |  i3 8100 |  Radeon Other
abhinasia said:
Can I get a Hackintosh guide for HP Z840 workstation
specification
Dual LGA2011 i am using single xeon E5 6 core Haswell CPU
Intel® C612 Chipset
16GB DDR4 ECC RAM
Realtek ALC221
nvidia Quadro K4200 (May work or not i dont know Geforce card available)
Intel® I218LM GbE LAN
1TB HDD no SSD
ACHI Controller May be HP or Intel

I have attached Full specification below you can see it..
Click to expand...

I don't hink that this will work
 
Status
Not open for further replies.
Copyright © 2010 - 2024 tonymacx86 LLC
Back
Top