- Joined
- Jun 13, 2017
- Messages
- 86
- Motherboard
- Asus X99-Pro
- CPU
- Intel i7-5820K
- Graphics
- Zotac GTX 970
- Mac
How do I apply the PCI Implementation part ?
Last edited:
HID: Legacy shim 2
Still waiting for root device
First of all thank you so much kgp What you've published here is epic
Unfortunately I'm not able to start the install process because I'm getting a nasty error, and I tried everthing best to my knowledge to fix it, but no luck so far.
I followed your guide meticulously.
I'm already running a 10.12.14 config on another disk. But for now I'm trying a clean install on a new (old) SSD.
I'm using the following configuration: I7-5820k, Asus X99-A and Asus GTX 760
My problem is: When I choose the "Start install from USB" option, everthing runs smooth until it stops with
doing nothing for probably 20seconds and the followed by this textCode:HID: Legacy shim 2
and the PROHIBITED sign afterwards.Code:Still waiting for root device
I'm pretty lost and really need some help.
Thank you so much in advance to all of you fellas.
This oneThanks man. Can you please tell me which "kernel kext" patch you're referring to?
Name: Find: Replace: Comment: MatchOS:
AppleUSBXHCIPCI 837d8c10 837d8c19 USB port limit patch
I have the same it is a MSI problem so now and then it does not boot.Hello! I'm having several troubles to get my system working with i7 6900k. Yesterday I have my working 100% working with my i7 5820k, but after change it to 6900k, I can't boot. I followed all your guide, even tried to create and boot with an installer USB but no look. Here are my post! Maybe you can help me: https://www.tonymacx86.com/threads/i-changed-my-cpu-and-cant-boot.242140/
By the way, I tried to boot the USB installer following your guide, with all your EFI folder and files and right config for my MOBO (KernelPM activated because I don't have ASUS mobo; I have MSI X99 SLI KRAIT EDITION), and I can't boot neither in my installed systema nor the installer, always stuck in +++++++++++. Because of that I opened a thread, to ask help!
If I create an USB installer following 100% your guide, when I try to boot, clover says:
Result = 0
doest printf work?
I tried to boot with nv_disable=1 too because I have to boot with gtx 1080 connected but no luck.
NVDAStartup: Official
NVDAGK100HAL loaded and registered
Unsupported CPU for reporter
kextd stall[0], (240s): 'AppleACPICPU'
Hey do you already have it done? I would like to have your ssdt file because i have the same board.... if you would like to share... i am not that good i know how to implement my cpu things but the rest is really above my capabilitiesThanks,
I will try it by myself 1st.