Contribute
Register

[SUCCESS] Gigabyte Designare Z390 (Thunderbolt 3) + i7-9700K + AMD RX 580

Joined
May 11, 2020
Messages
12
Motherboard
Gigabyte Designare Z390
CPU
i9-9900K
Graphics
RX 570
Mac
  1. iMac
Classic Mac
  1. Apple
除了驱动器不同,mojave是三星970 pro,catalina是wd sn750,其余所有配置一样,包括EFi文件,不敢相信

Can you post your BIOS configuration?
 
Joined
Jun 1, 2019
Messages
13
Motherboard
Designare Z390
CPU
9900
Graphics
Radeon VII
In addition to the different drivers, mojave is Samsung 970 pro, catalina is wd sn750, all other configurations are the same, including EFi files, can’t believe it
 

CaseySJ

Moderator
Joined
Nov 11, 2018
Messages
19,449
Motherboard
Asus ProArt Z690-Creator
CPU
i7-12700K
Graphics
RX 6800 XT
Mac
  1. MacBook Air
  2. MacBook Pro
  3. Mac Pro
Classic Mac
  1. Quadra
Mobile Phone
  1. iOS
Hey guys,

after installation with OpenCore 0.5.8, it seems work well all, except the audio system. In boot-args I tried all layouts for ALC1220 audio drivers, writing the alcid at the end of the instructions, but it doesn't work.

I assume to attached all files in order to understand where to fix the issue.

thanks in advance.
Please try this version. If problem persists, run Terminal and type:
Bash:
kextcache | grep -v apple
 

Attachments

  • config-alexgenovese.plist
    20.8 KB · Views: 64
Last edited:
Joined
Feb 10, 2018
Messages
84
Motherboard
Gigabyte Z390 Designare
CPU
i9-9900K
Graphics
UHD 630
okay have new install 10.15.3 and it is recognized under thunderbold and functions the same as on the mini mac of the hir is now again the same problem as with all gigabite mainboards now my problem who i connected the apollo and i record with a large membrane or a little bit through the beats click it crackles and distorts what. can this be grounding problem? bios settings?
 
Joined
Jun 1, 2019
Messages
13
Motherboard
Designare Z390
CPU
9900
Graphics
Radeon VII
Can you post your BIOS configuration?
(Thanks to @Zip1 for helping put this together!)
Press F2 to toggle to Advanced Mode.
Press F7 to Load Optimized Defaults.
Now make the following settings:
Tweaker
Advanced CPU Settings → VT-d → Disabled
Extreme Memory Profile (X.M.P.) → Profile 1
Settings
Internal Graphics → Enabled
Above 4G Decoding → Enabled
Thunderbolt(TM) Configuration
Security Level → No Security
This will trigger a 'Save & Exit' dialog so press ESC to close the dialog.
Discrete Thunderbolt(TM) Configuration
Thunderbolt USB Support → Enabled
GPIO3 Force Pwr → Enabled
USB Configuration
XHCI Handoff → Enabled
Boot
Windows 8/10 Features → Other OS
CSM Support → Disabled
Some devices such as GPUs may require CSM Support to be enabled. There is no harm in setting this to either Enabled or Disabled. Use the setting that works best.
Save & Exit → Save Profiles → Save to Profile 1
This preserves the firmware settings for easy recovery.

My current version number is F9b, and of course F6 is another configuration.I got it according to this, on the first page.
 
Joined
May 11, 2020
Messages
12
Motherboard
Gigabyte Designare Z390
CPU
i9-9900K
Graphics
RX 570
Mac
  1. iMac
Classic Mac
  1. Apple
Please try this version. If problem persists, run Terminal and type:
Bash:
kextcache | grep -v apple

Nothing is changed, disabling the SIP.

I attached the terminal output when I run that command.

I attached the output of this following command too
Bash:
kextstat | grep -E "AppleHDA|AppleALC|Lilu"
 

Attachments

  • Schermata 2020-06-04 alle 18.33.56.png
    Schermata 2020-06-04 alle 18.33.56.png
    106.9 KB · Views: 47
  • Schermata 2020-06-04 alle 18.37.06.png
    Schermata 2020-06-04 alle 18.37.06.png
    104.7 KB · Views: 41

CaseySJ

Moderator
Joined
Nov 11, 2018
Messages
19,449
Motherboard
Asus ProArt Z690-Creator
CPU
i7-12700K
Graphics
RX 6800 XT
Mac
  1. MacBook Air
  2. MacBook Pro
  3. Mac Pro
Classic Mac
  1. Quadra
Mobile Phone
  1. iOS
Nothing is changed, disabling the SIP.

I attached the terminal output when I run that command.

I attached the output of this following command too
Bash:
kextstat | grep -E "AppleHDA|AppleALC|Lilu"
Sorry, I meant "kextstat", but you figured that out. Please post:
  1. Screenshot of System Information --> Audio
  2. Run IORegistryExplorer, scroll to HDEF, click on HDEF, and post screenshot.
  3. Also check that Audio Controller is enabled in BIOS.
Screen Shot 2020-06-04 at 9.45.44 AM.png
BIOS-Audio-Controller.jpg
 
Last edited:
Joined
Feb 7, 2014
Messages
33
Motherboard
Gigabyte Designare Z390
CPU
i5 9600K
Graphics
2x RX580
Mac
  1. MacBook Air
  2. MacBook Pro
  3. Mac mini
Mobile Phone
  1. iOS
The most difficult part of flashing the Winbond chip:
@Inqnuam Did you use a raspberry pie to flash and did you use anything other than the clip and the breakout board?
 
Joined
Feb 7, 2014
Messages
33
Motherboard
Gigabyte Designare Z390
CPU
i5 9600K
Graphics
2x RX580
Mac
  1. MacBook Air
  2. MacBook Pro
  3. Mac mini
Mobile Phone
  1. iOS
@Inqnuam Did you use a raspberry pie to flash and did you use anything other than the clip and the breakout board?
SO this is VERY interesting. I left the system alone with the raspberry pie running for 20 minutes and I ran the flashrom command again and it found the chip!!!! I did nothing!!!!!
 
Top