- Joined
- Oct 17, 2013
- Messages
- 352
- Motherboard
- Gigabyte Z390 Designare
- CPU
- i9-9900K
- Graphics
- RX 580
- Mac
- Mobile Phone
Yes as it seems it works ok for now.
The Good Things:
Hardware Encoding is Supported only with Rx580, video usage with h265 using vlc was 8% for vlc and 4% for decoding.
Quicklook and preview works in every file including jpegs.
Fcpx now open everytime w/o issues.
Shutdown/restart works w/o any patches.
All USB ports work ok and it shows that it has recognize and usb3.1 (I don't have a device to test it).
Freezes I think they are gone too but I have to give it sometime here.
The Bad Things:
Geekbench Scores are a little lower than Mojave (6300,35000 HS - 6600-36000 Mojave)
Gpu is a little lower too... 138000 instead of 145000 in Mojave (with 4790k it was 150000+)
Cleanmymac shows that memory usage is a little higher in HS.
BIOS Settings:
VT-d disable
CFG-Lock disable
Secure Boot Mode disable
OS Type to Other OS
IO Serial Port disable
XHCI Handoff to Enabled
Above 4g Decoding Activated (thx TYR)
I use XMP II for my F4-3200C16D-16GTZR.
CSM is enabled and that's all!
I hope the system be stable in time and I don't have any rush to chase Mojave for now
Stability is the key for my work now...
P.S. TYR if you have any different or extra bios settings, when you have time let's share a few settings together.
UPDATE: 1st freeze today, same case as before but system is more stable than it was with Mojave.
The Good Things:
Hardware Encoding is Supported only with Rx580, video usage with h265 using vlc was 8% for vlc and 4% for decoding.
Quicklook and preview works in every file including jpegs.
Fcpx now open everytime w/o issues.
Shutdown/restart works w/o any patches.
All USB ports work ok and it shows that it has recognize and usb3.1 (I don't have a device to test it).
Freezes I think they are gone too but I have to give it sometime here.
The Bad Things:
Geekbench Scores are a little lower than Mojave (6300,35000 HS - 6600-36000 Mojave)
Gpu is a little lower too... 138000 instead of 145000 in Mojave (with 4790k it was 150000+)
Cleanmymac shows that memory usage is a little higher in HS.
BIOS Settings:
VT-d disable
CFG-Lock disable
Secure Boot Mode disable
OS Type to Other OS
IO Serial Port disable
XHCI Handoff to Enabled
Above 4g Decoding Activated (thx TYR)
I use XMP II for my F4-3200C16D-16GTZR.
CSM is enabled and that's all!
I hope the system be stable in time and I don't have any rush to chase Mojave for now
Stability is the key for my work now...
P.S. TYR if you have any different or extra bios settings, when you have time let's share a few settings together.
UPDATE: 1st freeze today, same case as before but system is more stable than it was with Mojave.
Last edited: