I
inactive-user
Guest
Just want to share my results updating to Mavericks.
I updated yesterday from my existing Mountain Lion 10.8.5 to Mavericks thanks to Unibeast 3.0 & MultiBeast 6.0
I had a while to get to the Mavericks installation screen! my Monitor/TV always lost the signal right before the installer should start, so always black screen.
Then i have tried out some flags, and finally i was lucky with "PCIRootUID=1" & "GraphicsEnabler=Yes"
seems logical as i have my GraphicsCard in PCI 1 Slot, and also my bios is set to slot 1.
After Installation i used MultiBeast and checked those boxes:
QUICK START:
- UserDSDT - I used a pre patched DSDT file for my Motherboard from Tonymacx86 Forum DSDT Download Section.
DRIVERS:
- DISK - TrimEnabler
- MISC - FakeSMC
- MISC - FakeSMC Plugins
- MISC - FakeSMC HWMonitor Appliication
- MISC - USB 3.0 - Universal by Zenith432
- NETWORK - Realtek - Lnx2Mac’s RealtekRTL81xx
BOOTLOADERS:
- Chimera 2.1.1
COSTUMIZE:
- BOOT OPTIONS - Generate CPU States
- BOOT OPTIONS - GraphicsEnabler=Yes
- BOOT OPTIONS - Hibernate Mode Desktop
- BOOT OPTIONS - IGPEnabler=Yes
- BOOT OPTIONS - PCI Root ID Fix
- BOOT OPTIONS - Use Kernel Cache
- BOOT OPTIONS - 1080p Display Mode
- SYSTEM DEFINITIONS - Mac Pro 3,1
- THEMES - Tonymacx89 Black
No Audio Driver needed as i have a External Audio Interface and already have those drivers.
Many, Many, Many Thanks!!!!!!!!! Tonymacx86 & Team!
My System seems to run very fine!
System: Hackintosh
OS: Mavericks 10.9.0
Boot loader: Chimera v2.2.1
CPU: Intel i7 960 (3.30GHz) Quad-Core
MB: Gigabyte x58a-ud3r r2 (Bios FF)
Graphics: nVidia GeForce GTS 450 OC (1GB) DDR5
nVidia CUDA Driver Version: 5.5.28
Official Apple GPU Driver Version: 8.18.22 310.40.05f01
Ram: Corsair 6GB DDR3 (1600mhz)
HD: Intel SSD 520 Series 240GB
Monitor: Sony Bravia 1920 x 1080 - (42 Zoll)
I updated yesterday from my existing Mountain Lion 10.8.5 to Mavericks thanks to Unibeast 3.0 & MultiBeast 6.0
I had a while to get to the Mavericks installation screen! my Monitor/TV always lost the signal right before the installer should start, so always black screen.
Then i have tried out some flags, and finally i was lucky with "PCIRootUID=1" & "GraphicsEnabler=Yes"
seems logical as i have my GraphicsCard in PCI 1 Slot, and also my bios is set to slot 1.
After Installation i used MultiBeast and checked those boxes:
QUICK START:
- UserDSDT - I used a pre patched DSDT file for my Motherboard from Tonymacx86 Forum DSDT Download Section.
DRIVERS:
- DISK - TrimEnabler
- MISC - FakeSMC
- MISC - FakeSMC Plugins
- MISC - FakeSMC HWMonitor Appliication
- MISC - USB 3.0 - Universal by Zenith432
- NETWORK - Realtek - Lnx2Mac’s RealtekRTL81xx
BOOTLOADERS:
- Chimera 2.1.1
COSTUMIZE:
- BOOT OPTIONS - Generate CPU States
- BOOT OPTIONS - GraphicsEnabler=Yes
- BOOT OPTIONS - Hibernate Mode Desktop
- BOOT OPTIONS - IGPEnabler=Yes
- BOOT OPTIONS - PCI Root ID Fix
- BOOT OPTIONS - Use Kernel Cache
- BOOT OPTIONS - 1080p Display Mode
- SYSTEM DEFINITIONS - Mac Pro 3,1
- THEMES - Tonymacx89 Black
No Audio Driver needed as i have a External Audio Interface and already have those drivers.
Many, Many, Many Thanks!!!!!!!!! Tonymacx86 & Team!
My System seems to run very fine!
System: Hackintosh
OS: Mavericks 10.9.0
Boot loader: Chimera v2.2.1
CPU: Intel i7 960 (3.30GHz) Quad-Core
MB: Gigabyte x58a-ud3r r2 (Bios FF)
Graphics: nVidia GeForce GTS 450 OC (1GB) DDR5
nVidia CUDA Driver Version: 5.5.28
Official Apple GPU Driver Version: 8.18.22 310.40.05f01
Ram: Corsair 6GB DDR3 (1600mhz)
HD: Intel SSD 520 Series 240GB
Monitor: Sony Bravia 1920 x 1080 - (42 Zoll)