MultiBeast 6.0 Update

[inactive-user]

Just want to share my results updating to Mavericks.

I updated yesterday from my existing Mountain Lion 10.8.5 to Mavericks thanks to Unibeast 3.0 & MultiBeast 6.0

I had a while to get to the Mavericks installation screen! my Monitor/TV always lost the signal right before the installer should start, so always black screen.
Then i have tried out some flags, and finally i was lucky with "PCIRootUID=1" & "GraphicsEnabler=Yes"
seems logical as i have my GraphicsCard in PCI 1 Slot, and also my bios is set to slot 1.

After Installation i used MultiBeast and checked those boxes:

QUICK START:
- UserDSDT - I used a pre patched DSDT file for my Motherboard from Tonymacx86 Forum DSDT Download Section.

DRIVERS:
- DISK - TrimEnabler
- MISC - FakeSMC
- MISC - FakeSMC Plugins
- MISC - FakeSMC HWMonitor Appliication
- MISC - USB 3.0 - Universal by Zenith432
- NETWORK - Realtek - Lnx2Mac’s RealtekRTL81xx

BOOTLOADERS:
- Chimera 2.1.1

COSTUMIZE:
- BOOT OPTIONS - Generate CPU States
- BOOT OPTIONS - GraphicsEnabler=Yes
- BOOT OPTIONS - Hibernate Mode Desktop
- BOOT OPTIONS - IGPEnabler=Yes
- BOOT OPTIONS - PCI Root ID Fix
- BOOT OPTIONS - Use Kernel Cache
- BOOT OPTIONS - 1080p Display Mode
- SYSTEM DEFINITIONS - Mac Pro 3,1
- THEMES - Tonymacx89 Black

No Audio Driver needed as i have a External Audio Interface and already have those drivers.

Many, Many, Many Thanks!!!!!!!!! Tonymacx86 & Team!

My System seems to run very fine!

System: Hackintosh
OS: Mavericks 10.9.0
Boot loader: Chimera v2.2.1
CPU: Intel i7 960 (3.30GHz) Quad-Core
MB: Gigabyte x58a-ud3r r2 (Bios FF)
Graphics: nVidia GeForce GTS 450 OC (1GB) DDR5
nVidia CUDA Driver Version: 5.5.28
Official Apple GPU Driver Version: 8.18.22 310.40.05f01
Ram: Corsair 6GB DDR3 (1600mhz)
HD: Intel SSD 520 Series 240GB
Monitor: Sony Bravia 1920 x 1080 - (42 Zoll)

 

[wimenpiet]

Article: MultiBeast 6.0 Update

Yhanks for the tutorial

 

[archangelhawke]

Article: MultiBeast 6.0 Update

I can't resume after screen saver after upgrading to mavericks. I have sleep set to never but I like to have my screensaver come on after 2 min so the computer will lock and require my password. Any suggestions?

GA-B75M-D3P
Intel i3-3225
Intel 4000 graphics

When I try to wake the computer, I can move the mouse but clicking and typing is unresponsive. The log in window never appears. The screen saver just continues.

I have the same problem on my i5 system. The other is fine. Same Motherboards (MSI Z77A-G45) on both systems. I did an upgrade on both instead of clean installs also.

Edit: It happens to me when the monitor is turned off for a while. I unplugged the monitor power cord and replugged it in while unresponsive, and the login screen came right up and worked fine without reboot.

 

[xianghu]

Article: MultiBeast 6.0 Update

I have the same problem on my i5 system. The other is fine. Same Motherboards (MSI Z77A-G45) on both systems. I did an upgrade on both instead of clean installs also.

Edit: It happens to me when the monitor is turned off for a while. I unplugged the monitor power cord and replugged it in while unresponsive, and the login screen came right up and worked fine without reboot.

huh. mine is s plugged into my HDTV and your right it only happens when the TV has been off for awhile. I'll have to try unplugging the TV or HDMI. I hope someone finds a more permanent solution tho.

 

[machine349]

this version is the best. thanks for building it.

 

[karwan.ghafari]

huge update thanks

- - - Updated - - -

huge update thanks

 

[onix]

MB: GA-B75M-D2V
CPU: G2120
Grapichcs: MSI GT210
EZLINK 128G SSD

1. USB 3.0 only work after sleep and wake


2. after install multi beast 6.0, every thing work great(exclude USB 3.0, USB 3.0 port is not work)
but get long startup time,
in ML 10.8.4 with multi Beast 5.1, start up time about 10 sec (with SSD)
[video=youtube;sieaigFze7U]https://www.youtube.com/watch?v=sieaigFze7U[/video]

clear install 10.9, start up time about 10~15 sec
[video=youtube;6CC89YM502c]https://www.youtube.com/watch?v=6CC89YM502c[/video]


after install multi beast 6.0, startup time more than 1 min and get white screen for a while
[video=youtube;vOxYsg29gSI]https://www.youtube.com/watch?v=vOxYsg29gSI&feature=youtu.be[/video]




use -v mode, the boot process stop at there for a while


[video=youtube;ts-zjVd3EmE]https://www.youtube.com/watch?v=ts-zjVd3EmE[/video]

 

[onix]

Article: MultiBeast 6.0 Update

USB 3.0 only work after sleep and wake in GA-B75M-D2V

 

[nxent]

sweet. maybe it'll fix the stability issues i've been having with 10.8.5?

 

[oliversl]

Many thanks! Saved profiles will save me tons of time. I save 1 profile after installing, and another for sound and network. Woohoo!!!