- Joined
- Mar 3, 2018
- Messages
- 14
- Motherboard
- ASRock z370 Gaming ITX a/c
- CPU
- i7 8700k
- Graphics
- Radeon RX 470
- Mac
- Mobile Phone
PARTS LIST: https://imgur.com/a/CptRl
TUTORIAL FOLLOWED:
1. To access BIOS/UEFI Setup, press and hold Delete on a USB Keyboard while the system is booting up
2. Load Optimized Defaults
3. If your CPU supports VT-d, disable it - *DISABLED
4. If your system has CFG-Lock, disable it - *DISABLED
5. If your system has Secure Boot Mode, disable it - *COULD NOT FIND/NOT IN SYSTEM
6. Set OS Type to Other OS - *COULD NOT FIND/NOT IN SYSTEM
7. If your system has IO Serial Port, disable it - *COULD NOT FIND/NOT IN SYSTEM
8. Set XHCI Handoff to Enabled - *ENABLED
9. If you have a 6 series or x58 system with AWARD BIOS, disable USB 3.0 - *PRETTY SURE THIS DOES NOT APPLY
10. Save and exit.
I am doing a clover install on Samsung SSD so I can later install WIN10 on my Atdata 240SSD
I've completed "Boot OS X Install from Install macOS High Sierra"
My next step is "Boot macOS from MACINTOSH" (MACINTOSH being the Samsung SSD).
My issue is that once I press enter it goes to the Apple Logo in the center of the screen and hangs. I've only let it sit for about ten minutes before I restart, I'm not sure if I am not giving it enough time to do whatever its doing.
This is my first Hackintosh, I am at a loss, let me know if you need more information so i can help you help me! also currently trying to figure out -v/verbose. Thank You! Happy Friday!
TUTORIAL FOLLOWED:
1. To access BIOS/UEFI Setup, press and hold Delete on a USB Keyboard while the system is booting up
2. Load Optimized Defaults
3. If your CPU supports VT-d, disable it - *DISABLED
4. If your system has CFG-Lock, disable it - *DISABLED
5. If your system has Secure Boot Mode, disable it - *COULD NOT FIND/NOT IN SYSTEM
6. Set OS Type to Other OS - *COULD NOT FIND/NOT IN SYSTEM
7. If your system has IO Serial Port, disable it - *COULD NOT FIND/NOT IN SYSTEM
8. Set XHCI Handoff to Enabled - *ENABLED
9. If you have a 6 series or x58 system with AWARD BIOS, disable USB 3.0 - *PRETTY SURE THIS DOES NOT APPLY
10. Save and exit.
I am doing a clover install on Samsung SSD so I can later install WIN10 on my Atdata 240SSD
I've completed "Boot OS X Install from Install macOS High Sierra"
My next step is "Boot macOS from MACINTOSH" (MACINTOSH being the Samsung SSD).
My issue is that once I press enter it goes to the Apple Logo in the center of the screen and hangs. I've only let it sit for about ten minutes before I restart, I'm not sure if I am not giving it enough time to do whatever its doing.
This is my first Hackintosh, I am at a loss, let me know if you need more information so i can help you help me! also currently trying to figure out -v/verbose. Thank You! Happy Friday!
Last edited by a moderator: