1. TFM

    << Solved >> Stuck at Apple logo 100% when trying to install

    Hello I followed this guide by the book https://www.tonymacx86.com/threads/unibeast-install-macos-catalina-on-any-supported-intel-based-pc.285366/#create_unibeast yet I get stuck at Apple logo at 100% after clover install. I did select verbose mode but nothing comes up since it's the pre...
  2. adam96pl

    Stuck at apple logo

    Hi, i have a problem with my first hackintosh. When i try boot from usb i see clover bootloader then i choose install mac os and then stuck at apple logo. i go through this guide: https://www.tonymacx86.com/threads/guide-booting-the-os-x-installer-on-laptops-with-clover.148093/ and this...
  3. Finneuru

    Refusing new kext's and kextd stall

    Got my build working without the GTX960, started installing updates when it suddenly wouldn't go to the macOS. The Machine was in the Apple logo screen with a full loadbar for around 30 minutes and didn't go anywhere from there. Launched with -v, -x to see this: I have no clue what to do now...
  4. DartME

    Mojave Apple Logo Stuck while installation

    Hey, so Im new to this stuff. It is just stuck( I can't do anything, it stayed all night in a stuck state, now in verbose it shows this. I tried USB Ownership and USB Inject, it doesn't work.
  5. jjforums

    Trying to boot Windows or Linux from Clover show logo picture instead of booting

    Hello, I have Windows and Linux in separated drives and wanted to boot them from Clover. When I Clover shows up, I see many options to choose from, but none of them actually boot the operating systems, instead they show the logo and get stuck there. How can I set up to boot from Linux and...
  6. Macguy12

    High sierra direct upgrade stuck at apple logo after passing verbose screen

    I have a perfectly working sierra 10.12.6 setup on my 3537. I've read through and gone with the steps mentioned in "Common problems in 10.13.x" thread, stopped VESA drivers from loading by injecting properties. Finally I've checked and updated kexts and clover patches. To avoid APFS conversion...
  7. Zacke04

    [Solved] Stuck at apple loading screen

    Hello! Im trying to install MacOS Sierra on my PC. I have changed all bios settings according to guide at this site. I came successfully to clover bootloader. I choose "Boot macos from Usb". Apple logo pops up and when the loading bar pops up, it stops booting (see picture). My keyboard and...
  8. tapeboxparts

    Install keeps hanging at Apple Logo

    PARTS LIST: https://imgur.com/a/CptRl TUTORIAL FOLLOWED: 1. To access BIOS/UEFI Setup, press and hold Delete on a USB Keyboard while the system is booting up 2. Load Optimized Defaults 3. If your CPU supports VT-d, disable it - *DISABLED 4. If your system has CFG-Lock, disable it - *DISABLED...
  9. Alessandro0699

    install hackintosh high sierra on Acer Aspire 5750g

    Hello everyone, I would need some help from you. Today I wanted to install on my old PC: Acer 5750g (i5 2410m CPU, 4gb RAM, Nvidia GT520m GPU) hackintosh High Sierra. After creating the key, I insert it in my old PC (Legacy boot) is created the Clover boot, but, when I start the installer of...
  10. morbidown

    Apple logo freeze

    Hello, guys, i have a problem. My hackintosh has the boot problem caught. The version of mac is High Sierra 10.13.3 This error happens soon after the clover's boot. *I had a hackintosh on the sierraf version on the same hardware and had no problems with the installation* Can someone help...
  11. lazypeach

    loading bar + black screen (sierra 10.12.6 - Nvidia Drivers)

    hi all, I already followed a bunch of tutorials I found online to install correctly the Nvidia drivers: - Nvidiaweb (in config.plist) - nvda_drv=1 enabling - nv_disable=1 disabling - Lilu.kext + The other kext I even tried AGDPfix with an SMBIOS on iMac17,1 as well as on iMac18,3 I'm running...
  12. J-brady

    ACPI Error: 6 table load failures

    So I've managed to get my hackintosh running over USB (still haven't figured out the Nvidia web drivers), but now when I boot via my main drive, I get caught up at the apple logo, in verbose mode it shows "ACPI Error: 6 table load failures, 3 successful (20160930/tbxfload-342)" I've tried...
  13. np112983

    Windows Boot Logo

    Hello Everyone, I have a triple booted system, UEFI High Sierra, Windows 10, and Ubuntu 17.10. Everything works perfectly except when windows boots instead of the regular boot logo I get my bios boot screen in its place(see attached picture). Anyone have any ideas? Thanks
  14. LeeRogers123

    Stuck at Apple Logo during install

    I'm attempting my first Hackintosh. I'm using a Retail DVD Snow Leopard 10.6.3. I've set up my BIOS as instructed. When I use iBoot 3.3.0 and try to install SL, it pops up the gray apple logo screen and doesn't progress. I tried -x -v and it loads the white text but then the screen goes...
  15. brennan.ruth0723

    Prohibited Sign when booting after config.plist change

    After updating my config.plist with the following code(see below) to address my audio issue, I rebooted my machine and cannot get passed the "prohibited" sign. I believe I messed up this process below as I forgot to add a kext. Question, how can I get back into my system to update my...
  16. jamsberg007

    [Solved] Black screen on installation after apple logo

    Hello, I'm new to this type of stuff so go easy on me x) I'm trying to get Sierra running on my hackingtosh (Most important specs below). I have tried GraphicsEnabler=yes, and I've also tried safe mode and single user mode but with the same result. SPECS: - Mobo: Asus P9X79 Pro - CPU: Intel...
  17. Pereira96

    [SOLVED] Stuck on Apple logo Z270 + KabyLake (i7-7700k)

    Hi, I'm new in this forum so i don't know if I have choose the right category if it's not, sorry and sorry for my bad english too. So I've create a UniBeast pen-drive with Sierra OS X then I've followed the guide and when in the UniBeast boot menù I choose External then i press enter first it's...
  18. manuelfinotti

    Boot freeze after install kext USB 3.0

    Hi, I'm new in the forum and this is my first post. Yesterday I was trying to install the kext to recognize the usb 3.0 "GenericUSBXHCI" but something went wrong and to restart the computer crashed on the logo upload as it will go. It does not go forward. I entered the hard drive and I removed...
  19. markmcleod50

    Cannot do a clean install - settings keep changing

    I did a successful install of Sierra but was having a few issues with audio and other things. I decided to do a clean install. I made another unibeast usb stick but when I try to boot from it by selecting external in the Clover menu (right after bios), the apple logo appears and the status bar...
  20. PatoElZapato

    Problem with icons

    Hi, i have installed succesfully Sierra, the first time i had a problem with apple logo in apple menu `cause this looks like a qr code but after the logo looks normal, but now I installed X Code and all the logos looks like a qr code somebody knows how can I fix it? thanks! sorry for my bad English