It's my workstation for Davinchi Resolve.
All works perfectly, but Thunderbolt not :(
My worked EFI attached. Clover not fresh but works like AK47
=== MacOS ===
High Sierra 10.13.6 (17G65)
=== Hardware ===
Asrock Z370 Fatality itx/ac
Intel i7 8700K [Delided] + Raijintek Pallas @Stock clock NO...
My ITX motherboard not working with AMD Vega. But works with RX580 Pulse. But RX580 less powerfull then any Vega and i need good card for Davinci Resolve. Does anybody knows good ITX motherboard for 8700K and Vega 64?
My current MB – AssRock Gaming Z370 Fatality itx/ac
I spent four days of my life for update my perfectly works on High Sierra hackintosh to latest Mojave 10.14.6
English is not my native language, therefore full article will soon, but short version here.
My config for High Sierra is:
AsRock Gaming z370 Fatality itx/ac
Four years ago i built my first computer and hackintosh, and it has served me well throughout the years, however as i require more and more computing power, the systems is starting to show its age.
For this build i am looking for three things specially: Size, Power and...
On almost all the adapters that you can buy, the manufacturer incorrectly threw the ground poligon.Therefore, you need to isolate the NGFF adapter from the BCM94360CS2 network card and from the shield that installed on the motherboard. Sometimes need to isolate all places where we must...
I want to build new budget hackitosh (mojave) with Intel i3 8100 (with UHD 630 as a graphic card), Crucial Balistix 2666 8GB RAM, SSD Crucial MX500 240GB and put it to Antec ISK 110 case. I have problem with choosing the itx mobo. Like I wrote I want to build budget hackitosh but all...
Are there any mini-ITX motherboards that come with the broadcom wifi chip?
I'm learning fast... I got the Gigabyte H370N WIFI and have run it up but was a bit disappointed to learn there are no drivers to run the intel wifi installed on the motherboard and I need to jump through hoops to...
So I've used MacOS for some time. My machines were always the Macbook 13'' (air and pro). I hate the new Mac laptops so much and I need a small build for an upgrade from my current system. Here are the parts:
- i5 8400 (already bought).
- Gigabyte H370N WIFI - I'm so open to other...
Hi so this is my first Hackintosh and I want to know if my current windows ten desktop will work.
my full specs are:
MB: ASRock H310-ITX/ac with Intel(R) Dual Band Wireless-AC 3168
Intel i5 8600K
Nvidia GTX 1050 Ti
16GB Corsair vengeance lpx (2x8gb)
WD Blue 1TB Desktop Hard Disk Drive...
I'm thinking on upgrading graphic adapters. Since I use Final Cut it seems like AMD is the way to go now, but I'm wondering if a setup with dual cards will perform better.
I've been looking at the ITX versions of the Sapphire 570 Pulse 4Gb, since I use a rack case and my space is...
PARTS LIST: https://imgur.com/a/CptRl
1. To access BIOS/UEFI Setup, press and hold Delete on a USB Keyboard while the system is booting up
2. Load Optimized Defaults
3. If your CPU supports VT-d, disable it - *DISABLED
4. If your system has CFG-Lock, disable it - *DISABLED...
This is my first post here. I am a late 2013 Macbook Pro user - my laptop is pretty slow in these days and I would like to replace it with a custom hackintosh. The things I am looking for are:
- Full WiFi / BT compatibility (2.4/5GHz 802.11ac, airplay, airdop, handoff, continuity)
So for the past few months I have been looking into building a new PC for myself as I go of to university. I have enough saved up to build a fair system but I do not require it to have much if any gaming capability as I have a console for that. What I was more looking for was a low power...
I finally managed to put my build together. I crammed everything into a Node 202. Damn it was hard, but worh it. Looks so pretty now. It booted my old Sierra SDD just fine. I had put the required kexts in the EFI folder prior to building the PC.
Sound worked out of the box. Graphics come up on...
Hey everyone. It's good to see this community not only up and running but thriving. It's been a while since I've built a hackintosh, as the build in my sig indicates. That sucker dates WAY back. I sold that rig quite a long time ago and since have gone through a few Macs (iMac 27", 2012...
I'm new here, and totally new to hackintoshing. Last time I made a build was a decade ago! I'll be documenting the build. Hopefully the info will be useful, and I could get some help if I run into trouble.
Currently on a late 2012 Mac Mini + Late 2013 MBP for work stuff. I've been...
Could someone please recommend an UP-TO-DATE
MOBO (for SEIRRA)
ITX or MATX
that has thunderbolt 3 (to be used as thunderbolt 2) for UAD Audio.
I'll need WIFI and BT - so if using the first PCIE slot affects the thunderbolt (please take that into consideration)
I booted safely into Sierra 10.12 through Multibeast, and after the driver installation, my audio still doesn't work. Also Bluetooth options are no where to be found.
My system is running on an AsRock Z170m iTX/ac (supported by the buyers guide here) with an 6700K, 16 GB of RAM. No...
I am new to tonymackx86 and i would like to build my first Hackintosh.
I am a pretty experienced PC builder as every PC i owned since 1995 i build and maintain/upgrade myself.
- Could you confirm that i am in the right path and that all the components that i chose are compatible with...