i7-4930K - Asus Rampage IV Extreme - 32GB RAM - GTX 770 4GB [Success!!]

[geminii]

I'm definitely no wizard and not that knowledgeable but with my minimal experience it looks to me like it's a USB-related issue.

Strange. The first part of the panic report seems to be related to CPU.

 

[PiersonFox]

I just wanted to say Thank you for your tireless dedication, I have been using your guides for years to update since like 10.8 or 10.9 and I have to say this was the easiest and runs much better than before since I have gotten upgraded to 10.12. Speedstep seems to be running much better, love the lower wattage idle. Thanks again!

 

[songsovered]

Hi! Thank you so much shilohh for your hard work! It's amazing to see working macOS on my pc! But I have 1 little problem and I hope you can help me to solve it! I have the same setup as yours, and I can't get working my CPU on overclocked frequencies. I have 4.4 in stable for long years, here is a pic on bottom. Hope you can help me! Thanks a lot!!
Edit: Sorry if I miss the answer in this thread
Edit2: here is appleinfolog

Spoiler: log

AppleIntelInfo.kext v1.2 Copyright © 2012-2015 Pike R. Alpha. All rights reserved


Settings:

------------------------------------

logMSRs............................: 1

logIGPU............................: 0

logIntelRegs.......................: 1

logCStates.........................: 1

logIPGStyle........................: 0

InitialTSC.........................: 0x63820f45868

MWAIT C-States.....................: 4384


Model Specific Regiters

------------------------------------

MSR_CORE_THREAD_COUNT......(0x35) : 0x6000C

MSR_PLATFORM_INFO..........(0xCE) : 0xC10F0012200

MSR_PMG_CST_CONFIG_CONTROL.(0xE2) : 0x401

MSR_PMG_IO_CAPTURE_BASE....(0xE4) : 0x10414

IA32_MPERF.................(0xE7) : 0x41D4D1DC20

IA32_APERF.................(0xE8) : 0x4111F5F4AD

MSR_FLEX_RATIO.............(0x194) : 0xE0000

MSR_IA32_PERF_STATUS.......(0x198) : 0x23DE00002200

MSR_IA32_PERF_CONTROL......(0x199) : 0x2200

IA32_CLOCK_MODULATION......(0x19A) : 0x0

IA32_THERM_STATUS..........(0x19C) : 0x88460000

IA32_MISC_ENABLES..........(0x1A0) : 0x850089

MSR_MISC_PWR_MGMT..........(0x1AA) : 0x400001

MSR_TURBO_RATIO_LIMIT......(0x1AD) : 0x24242C2C2C2C2C2C

IA32_ENERGY_PERF_BIAS......(0x1B0) : 0x0

MSR_POWER_CTL..............(0x1FC) : 0x2104005B

MSR_RAPL_POWER_UNIT........(0x606) : 0xA1003

MSR_PKG_POWER_LIMIT........(0x610) : 0x69F40005A9F40

MSR_PKG_ENERGY_STATUS......(0x611) : 0x9B4A18BA

MSR_PKG_POWER_INFO.........(0x614) : 0x1E00410

MSR_PP0_CURRENT_CONFIG.....(0x601) : 0x14149480001FFF

MSR_PP0_POWER_LIMIT........(0x638) : 0x0

MSR_PP0_ENERGY_STATUS......(0x639) : 0x53DB258C

MSR_PP0_POLICY.............(0x63a) : 0x0

MSR_PKGC3_IRTL.............(0x60a) : 0x0

MSR_PKGC6_IRTL.............(0x60b) : 0x0

MSR_PKG_C2_RESIDENCY.......(0x60d) : 0x0

MSR_PKG_C6_RESIDENCY.......(0x3f9) : 0x0

IA32_TSC_DEADLINE..........(0x6E0) : 0x63826ABEF8C

PCH device.................: 0x1D418086


CPU Ratio Info:

------------------------------------

CPU Low Frequency Mode.............: 1200 MHz

CPU Maximum non-Turbo Frequency....: 3400 MHz

CPU Maximum Turbo Frequency........: 4400 MHz

CPU P-States [ (34) ]

CPU P-States [ (12) 34 ]

Looks like it can't enable Turbo....

 

[shilohh]

Hi! Thank you so much shilohh for your hard work! It's amazing to see working macOS on my pc! But I have 1 little problem and I hope you can help me to solve it! I have the same setup as yours, and I can't get working my CPU on overclocked frequencies. I have 4.4 in stable for long years, here is a pic on bottom. Hope you can help me! Thanks a lot!!
Edit: Sorry if I miss the answer in this thread
Edit2: here is appleinfolog

Spoiler: log

AppleIntelInfo.kext v1.2 Copyright © 2012-2015 Pike R. Alpha. All rights reserved


Settings:

------------------------------------

logMSRs............................: 1

logIGPU............................: 0

logIntelRegs.......................: 1

logCStates.........................: 1

logIPGStyle........................: 0

InitialTSC.........................: 0x63820f45868

MWAIT C-States.....................: 4384


Model Specific Regiters

------------------------------------

MSR_CORE_THREAD_COUNT......(0x35) : 0x6000C

MSR_PLATFORM_INFO..........(0xCE) : 0xC10F0012200

MSR_PMG_CST_CONFIG_CONTROL.(0xE2) : 0x401

MSR_PMG_IO_CAPTURE_BASE....(0xE4) : 0x10414

IA32_MPERF.................(0xE7) : 0x41D4D1DC20

IA32_APERF.................(0xE8) : 0x4111F5F4AD

MSR_FLEX_RATIO.............(0x194) : 0xE0000

MSR_IA32_PERF_STATUS.......(0x198) : 0x23DE00002200

MSR_IA32_PERF_CONTROL......(0x199) : 0x2200

IA32_CLOCK_MODULATION......(0x19A) : 0x0

IA32_THERM_STATUS..........(0x19C) : 0x88460000

IA32_MISC_ENABLES..........(0x1A0) : 0x850089

MSR_MISC_PWR_MGMT..........(0x1AA) : 0x400001

MSR_TURBO_RATIO_LIMIT......(0x1AD) : 0x24242C2C2C2C2C2C

IA32_ENERGY_PERF_BIAS......(0x1B0) : 0x0

MSR_POWER_CTL..............(0x1FC) : 0x2104005B

MSR_RAPL_POWER_UNIT........(0x606) : 0xA1003

MSR_PKG_POWER_LIMIT........(0x610) : 0x69F40005A9F40

MSR_PKG_ENERGY_STATUS......(0x611) : 0x9B4A18BA

MSR_PKG_POWER_INFO.........(0x614) : 0x1E00410

MSR_PP0_CURRENT_CONFIG.....(0x601) : 0x14149480001FFF

MSR_PP0_POWER_LIMIT........(0x638) : 0x0

MSR_PP0_ENERGY_STATUS......(0x639) : 0x53DB258C

MSR_PP0_POLICY.............(0x63a) : 0x0

MSR_PKGC3_IRTL.............(0x60a) : 0x0

MSR_PKGC6_IRTL.............(0x60b) : 0x0

MSR_PKG_C2_RESIDENCY.......(0x60d) : 0x0

MSR_PKG_C6_RESIDENCY.......(0x3f9) : 0x0

IA32_TSC_DEADLINE..........(0x6E0) : 0x63826ABEF8C

PCH device.................: 0x1D418086


CPU Ratio Info:

------------------------------------

CPU Low Frequency Mode.............: 1200 MHz

CPU Maximum non-Turbo Frequency....: 3400 MHz

CPU Maximum Turbo Frequency........: 4400 MHz

CPU P-States [ (34) ]

CPU P-States [ (12) 34 ]

Looks like it can't enable Turbo....

What are your bios settings that you're using for the over clock? Did you start RunAppleIntelInfo and then run geekbench?

 

[songsovered]

What are your bios settings that you're using for the over clock? Did you start RunAppleIntelInfo and then run geekbench?

I'm using x44 multiplier, 1.32v voltage all on manual. Now I have an experiments with ssdtPRGen and it's generate for me an SSDT file with stock clocks... replacing the SSDT-9 in EFI and my clocks on 4.0ghz... Maybe you can help me to set needed keys with ssdtPRGen for build with 4,4ghz?
Here is a new log:

Spoiler: log_new

AppleIntelInfo.kext v1.2 Copyright © 2012-2015 Pike R. Alpha. All rights reserved


Settings:

------------------------------------

logMSRs............................: 1

logIGPU............................: 0

logIntelRegs.......................: 1

logCStates.........................: 1

logIPGStyle........................: 0

InitialTSC.........................: 0x51fe2b429d89

MWAIT C-States.....................: 4384


Model Specific Regiters

------------------------------------

MSR_CORE_THREAD_COUNT......(0x35) : 0x6000C

MSR_PLATFORM_INFO..........(0xCE) : 0xC10F0012200

MSR_PMG_CST_CONFIG_CONTROL.(0xE2) : 0x403

MSR_PMG_IO_CAPTURE_BASE....(0xE4) : 0x10414

IA32_MPERF.................(0xE7) : 0x2F57CAB363

IA32_APERF.................(0xE8) : 0x3C2BBE4E67

MSR_FLEX_RATIO.............(0x194) : 0xE0000

MSR_IA32_PERF_STATUS.......(0x198) : 0x292700002800

MSR_IA32_PERF_CONTROL......(0x199) : 0x2800

IA32_CLOCK_MODULATION......(0x19A) : 0x0

IA32_THERM_STATUS..........(0x19C) : 0x883E0000

IA32_MISC_ENABLES..........(0x1A0) : 0x850089

MSR_MISC_PWR_MGMT..........(0x1AA) : 0x400001

MSR_TURBO_RATIO_LIMIT......(0x1AD) : 0x24242C2C2C2C2C2C

IA32_ENERGY_PERF_BIAS......(0x1B0) : 0x0

MSR_POWER_CTL..............(0x1FC) : 0x2104005B

MSR_RAPL_POWER_UNIT........(0x606) : 0xA1003

MSR_PKG_POWER_LIMIT........(0x610) : 0x69F40005A9F40

MSR_PKG_ENERGY_STATUS......(0x611) : 0x1FD85699

MSR_PKG_POWER_INFO.........(0x614) : 0x1E00410

MSR_PP0_CURRENT_CONFIG.....(0x601) : 0x14149480001FFF

MSR_PP0_POWER_LIMIT........(0x638) : 0x80000000

MSR_PP0_ENERGY_STATUS......(0x639) : 0x16534E7A

MSR_PP0_POLICY.............(0x63a) : 0x0

MSR_PKGC3_IRTL.............(0x60a) : 0x0

MSR_PKGC6_IRTL.............(0x60b) : 0x0

MSR_PKG_C2_RESIDENCY.......(0x60d) : 0x2FAA0C6A5A

MSR_PKG_C6_RESIDENCY.......(0x3f9) : 0x31896E73FC

IA32_TSC_DEADLINE..........(0x6E0) : 0x51FE30FA2363

PCH device.................: 0x1D418086


CPU Ratio Info:

------------------------------------

CPU Low Frequency Mode.............: 1200 MHz

CPU Maximum non-Turbo Frequency....: 3400 MHz

CPU Maximum Turbo Frequency........: 4400 MHz

CPU P-States [ (23) 40 ]

CPU C3-Cores [ 0 1 8 9 ]

CPU C6-Cores [ 0 3 5 9 11 ]

CPU C3-Cores [ 0 1 2 3 8 9 ]

CPU C6-Cores [ 0 3 4 5 6 7 8 9 10 11 ]

CPU C6-Cores [ 0 2 3 4 5 6 7 8 9 10 11 ]

CPU C6-Cores [ 0 1 2 3 4 5 6 7 8 9 10 11 ]

CPU P-States [ (12) 23 40 ]

CPU P-States [ 12 23 (29) 40 ]

CPU C3-Cores [ 0 1 2 3 8 9 10 11 ]

CPU P-States [ 12 23 29 (37) 40 ]

CPU P-States [ 12 23 29 (34) 37 40 ]

CPU C3-Cores [ 0 1 2 3 4 8 9 10 11 ]

CPU C3-Cores [ 0 1 2 3 4 5 8 9 10 11 ]

CPU C3-Cores [ 0 1 2 3 4 5 6 7 8 9 10 11 ]

Edit: fixed with build key ssdtPRGen -turbo 4400
thx for answer
Now log looks like:

Spoiler

AppleIntelInfo.kext v1.2 Copyright © 2012-2015 Pike R. Alpha. All rights reserved


Settings:

------------------------------------

logMSRs............................: 1

logIGPU............................: 0

logIntelRegs.......................: 1

logCStates.........................: 1

logIPGStyle........................: 0

InitialTSC.........................: 0x572b3886eed9

MWAIT C-States.....................: 4384


Model Specific Regiters

------------------------------------

MSR_CORE_THREAD_COUNT......(0x35) : 0x6000C

MSR_PLATFORM_INFO..........(0xCE) : 0xC10F0012200

MSR_PMG_CST_CONFIG_CONTROL.(0xE2) : 0x403

MSR_PMG_IO_CAPTURE_BASE....(0xE4) : 0x10414

IA32_MPERF.................(0xE7) : 0x42AD4C5111

IA32_APERF.................(0xE8) : 0x667F34298A

MSR_FLEX_RATIO.............(0x194) : 0xE0000

MSR_IA32_PERF_STATUS.......(0x198) : 0x22BF00002200

MSR_IA32_PERF_CONTROL......(0x199) : 0x2200

IA32_CLOCK_MODULATION......(0x19A) : 0x0

IA32_THERM_STATUS..........(0x19C) : 0x88450000

IA32_MISC_ENABLES..........(0x1A0) : 0x850089

MSR_MISC_PWR_MGMT..........(0x1AA) : 0x400001

MSR_TURBO_RATIO_LIMIT......(0x1AD) : 0x24242C2C2C2C2C2C

IA32_ENERGY_PERF_BIAS......(0x1B0) : 0x0

MSR_POWER_CTL..............(0x1FC) : 0x2104005B

MSR_RAPL_POWER_UNIT........(0x606) : 0xA1003

MSR_PKG_POWER_LIMIT........(0x610) : 0x69F40005A9F40

MSR_PKG_ENERGY_STATUS......(0x611) : 0x3509A8CB

MSR_PKG_POWER_INFO.........(0x614) : 0x1E00410

MSR_PP0_CURRENT_CONFIG.....(0x601) : 0x14149480001FFF

MSR_PP0_POWER_LIMIT........(0x638) : 0x80000000

MSR_PP0_ENERGY_STATUS......(0x639) : 0x2705FBCD

MSR_PP0_POLICY.............(0x63a) : 0x0

MSR_PKGC3_IRTL.............(0x60a) : 0x0

MSR_PKGC6_IRTL.............(0x60b) : 0x0

MSR_PKG_C2_RESIDENCY.......(0x60d) : 0x45FD1CCB6E

MSR_PKG_C6_RESIDENCY.......(0x3f9) : 0x29C6C3A1CC

IA32_TSC_DEADLINE..........(0x6E0) : 0x572B3D317A05

PCH device.................: 0x1D418086


CPU Ratio Info:

------------------------------------

CPU Low Frequency Mode.............: 1200 MHz

CPU Maximum non-Turbo Frequency....: 3400 MHz

CPU Maximum Turbo Frequency........: 4400 MHz

CPU P-States [ (12) 23 ]

CPU C3-Cores [ 0 3 10 11 ]

CPU C6-Cores [ 0 1 3 8 9 11 ]

CPU C3-Cores [ 0 3 4 5 8 10 11 ]

CPU C6-Cores [ 0 1 2 3 4 8 9 11 ]

CPU P-States [ 12 23 (34) ]

CPU C3-Cores [ 0 1 3 4 5 6 7 8 10 11 ]

CPU C6-Cores [ 0 1 2 3 4 8 9 10 11 ]

CPU C3-Cores [ 0 1 3 4 5 6 7 8 9 10 11 ]

CPU C6-Cores [ 0 1 2 3 4 7 8 9 10 11 ]

CPU C3-Cores [ 0 1 2 3 4 5 6 7 8 9 10 11 ]

CPU C6-Cores [ 0 1 2 3 4 6 7 8 9 10 11 ]

CPU C6-Cores [ 0 1 2 3 4 5 6 7 8 9 10 11 ]

CPU P-States [ 12 23 34 (44) ]

CPU P-States [ 12 23 34 (40) 44 ]

 

[PhantomHelix]

shilohh is there any way to create SSDT's for 4 port Kepler Nvidia cards in slots 1 and 4 that are capable of having HDMI audio with CSM disabled? my setup really has no need for CSM and macOS runs a tad better and doesn't visually stretch the image during boot with my fully UEFI bootable MSI lightning 780's?

It's really just a personal preference but it's the one thing that bugs me everytime I boot

 

[shilohh]

shilohh is there any way to create SSDT's for 4 port Kepler Nvidia cards in slots 1 and 4 that are capable of having HDMI audio with CSM disabled? my setup really has no need for CSM and macOS runs a tad better and doesn't visually stretch the image during boot with my fully UEFI bootable MSI lightning 780's?

It's really just a personal preference but it's the one thing that bugs me everytime I boot

Having to use CSM is determined by the GPU's VBIOS (whether it is UEFI compatible). Using 2 UEFI compatible GPUs shouldn't cause you to need CSM. I use 2 maxwell cards with CSM disabled.

HDMI audio requires ACPI injection (SSDT, DSDT or kext injection) of the HDMI audio device (HDEF). We used to have to add all the card's properties (NVCAP, ports & more) via DSDT/SSDT to get them to work, but nvidia started injecting device properties via their web drivers (kext injection). If properties are injected twice, it can create a conflict (panic). One example is, I used to have to add the property "nvParent" for the 1st card and "nvChild" for all additional cards but a version of the web drivers broke when nvidia added functionality for multiple cards to the web drivers. If the current web driver injects HDEF, then we shouldn't. If it doesn't, then we need to for HDMI audio to work. It's tricky now because I'm not positive what to inject into the ACPI tables for each card and web driver version. The safe bet is to do the minimum and test. If HDMI audio doesn't work, then add HDEF (or whatever properties/functionality we're trying to achieve).

 

[PhantomHelix]

Well I'm not sure exactly how to do any of that outside of the provided apps you supplied, but I'm on 10.12.3 with the most current nvidia web drivers and I have never been able to get HDMI audio with CSM disable so I have been stuck leaving it on, HDMI and my TV don't even show up in the sound settings with it disabled

 

[shilohh]

Well I'm not sure exactly how to do any of that outside of the provided apps you supplied, but I'm on 10.12.3 with the most current nvidia web drivers and I have never been able to get HDMI audio with CSM disable so I have been stuck leaving it on, HDMI and my TV don't even show up in the sound settings with it disabled

That's a new one on me.

Are you using SSDT-1 and SSDT-4 from the Kepler folder?

Have you looked for ROM (VBIOS) updates for the GPUs you have?

 

[PhantomHelix]

Yes I'm using ssdt's from the current file the December update, clover is build is 4003 that has some new nvidia setting that your config files don't use but adding it in changes nothing

And yes I have the latest and probably last vbios from MSI for these cards, before I updated them they did not have UEFI boot ability

That's a new one on me.

Are you using SSDT-1 and SSDT-4 from the Kepler folder?

Have you looked for ROM (VBIOS) updates for the GPUs you have?