RehabMan
Moderator
- Joined
- May 2, 2012
- Messages
- 181,056
- Motherboard
- Intel DH67BL
- CPU
- i7-2600K
- Graphics
- HD 3000
- Mac
- Mobile Phone
Hello Rehab,
As always, an excellent job on your part. Thank you.
I know that this is a tutorial for the NUC, but I have tested it on the BRIX and it worked perfectly. Even the sleep. I have created the USB with HS 10.13.6.
The only problem here is the monitor that does not wake up, but I turn it off~on and it works (that is, I have this problem in other machines with windows, I think it's a problem with HDMI, I'm not sure, but it's not serious ).
But... (there is always a but):
1) The audio on the ALC255 does not work, the device does not appear, is there a way to fix it? By HDMI it works very well.
2) on the CLOVER screen and on the LOGIN screen, red dots appear blinking. (as when the monitor points fail), but these disappear after login. Is it possible that it is a configuration?
Just in case, I put the files created with gen_debug
Thanks
This guide is only for the Intel NUC.
I have no plans to add BRIX support to this guide/repo.