ssdt

Hello for all ! I have a problem with my Hackintosh Lenovo G-50-70 with i3-4005u CPU and HD4400 Graphics Card. I have a full qe/ci acceleration and my graphics card works fine but i'm cannot make the battery status work. I will tried with the RehabMan G50-70 patch but i have a multiple errors on...

Hi, stuck on my DSDT.... tables extracted using Clover f4 disassembled with iasl and then get a "syntax error, unexpected }".... I can not fix it :banghead: . Attached are the "original" and disassembled DSDT and the SSDT that will not compile(don't know if I need them at all...) Any help...

After several days of trying I gave up.:banghead: So I have an Acer E5-572G-38HC laptop. Specs : Cpu:Core i3-4000M 2.4 Ghz IGPU:HD4600 (working after installing patched kext and framework) Dedicated GPU: NVIDIA 840M (I want to disable it for power saving) RAM :4GB Installed Yosemite 10.10.2...

I have pretty much everything running well for the exception of sleep and the AGPM Unknown Platform on boot. For audio I could not get the alc892 to work and I did read the forums, When running codec detect, no codec was found. VoodooHDA fixed this so audio is fine. I was wondering if someone...

As the title mentions, I've been having trouble booting up my system after installing an SSDT, but before I go into detail, a little information about my setup: Bootloader: Clover 3113 on OS 10.10.1 SMBIOS: Macmini6,2 MB: Z77X-UD5H (BIOS F14) CPU: i7-3770K GPU: Powercolor R9 280X So...

how to use ssdtPRGen.sh https://github.com/Piker-Alpha/ssdtPRGen.sh to create my custom SSDT file ?

Hi, I have power management working on my laptop already, but the only 4 P-States my CPU (i3-3217U) will go to are x8 (0.8GHz), x13 (1.3GHz), x15 (1.5GHz), and x18 (1.8GHz, top speed). I've always used the SSDT's generated by Clover. I started to experiment with Pike R. Alpha's SSDT Generator...

Hi everyone I have an i5-2500k and Gigabyte GA Z77-DS3H. It's been running great for a year or more but I've never been able to overclock it. I just decided to try again, and no matter what I set, my hardware monitor shows a CPU Package Multiplier of x16 and CPU Package of 1.60GHz, and it never...

Hi, i have a probook 6470b with i5 3210m All installed successfully, create ssdt with SSDTPRGEN.SH (latest version). in some cases of work, some of them using EOS utility 2 for controlling camera during movie shooting, some of them transcoding video from Final Cut Pro X (that uses almost...

Hello Hello, I usually can find a solution on the Forum but with this issue i am coming up with lots of unrelated or repetitive information.. I'm sure someone smarter then i will solve this in a snap.. so here it is: (Find attached AsRock Z87E-ITX.zip and a MaciASL Screenshot) from...

Hey guys. I've been hackintoshing for a while now, and I can generally get everything pretty well figured out on my own with the help of this forum and a couple others. This time I'm really stuck though. I have a Thinkpad W520 with a core i7 2670qm, 24gb of ram, and the quadro k1000m. I removed...

I tried extracting DSDT using the MaciASL and got following errors: I also tried using the DSDT and SSDT from linux and then using iasl to extract del. When I try to compile using MaciASL i get flowing errors: I am using clover and I have tried all possible ways to enable HD4600 on my...

I am a newbie in the Hackintosh World and just followed Installation Guidence online and really glad to get Mavericks 10.9.1 running on my laptop. However, HWMonitor shows that my CPU sticks at 1.99GHz(which is the MaxFreq) all the time. I searched on Google and here only have the knowledge that...

Hello, I was wondering if anyone has found SMBios settings that would allow a smoother p-state range. I installed Mavericks 9.1 with the current Multibeast and system definition iMac14,2 for Haswell Core i5-4440 / GA-Z87MX-D3H. Everything works fine, except that there are only 2 p-states: 8 and...

I have read through this thread several times in an attempt to figure out how to get hdmi audio to work on my set up. http://www.tonymacx86.com/hdmi-audio/112469-mavericks-hdmi-audio-applehda-guide.html Not only am I not able to get it to work, but I do not even know where to start. I can see...

So I have UD5h with a weird sleep problem. My desktop will appear to sleep fine through the night but it will periodically wake up for about 10 seconds then go right back to sleep. The screens do not turn on while its doing this but it wakes up many different times during the night. I can only...

Hi people, I just made a 10.8.3 clean install on a Gigabyte GA-H61M-S2V-B3 with a Intel i5 3470. According to Intel, this micro run at 3.2Ghz and up to 3.6Ghz in turbo boost with multiplier of 36x, but "about this mac" shows 3.39Ghz and with HWMonitor I see speedstep is working well but only...

I am really struggling to understand how OSX 10.8 and overclocking works. I Currently have a Gigabyte Z68X-UD3H-B3 with U1H Bios and an i5 2500k CPU. I have the i5/i7 SSDT from MultiBeast installed. I have read through many of the forms on tonymac about how I should setup my BIOS, multipliers...

I have a patched UEFI and could get rid of NullCPUPowermanagement nor do I need a patched AppleIntelCPUPowerManagement kext. Running 10.8.2 and having issues with sleep/wake. The computer sleeps just fine, however waking up is an issue. Both the mouse or the keyboard can't wake up the machine...

Got a hack running mean as, only thing not working is sleep as it ejects USB's afterwards Components 3770K @ 4.7ghz on water z77x-UD5H GTX 670 TP-link wd4800 120gb ocz agility 3 4tb Raid (software raid0) 500gb Windows drive 650W PSU To get everything working, just ibooted with...