no signal

i am a bit of a noob to hackintosh but im trying to install Yosemite onto my pc i have: Gigabyte EP35-DS3 motherboardGigabyte NVIDIA GeForce 6400GT graphics card. im using a dvi to hdmi from my graphics card. i also cannot use integrated graphics because my motherboard doesnt have any ports...

(SOLVED) Yosemite no signal after boot (R9 280) Hello Today I decided to get back into hackingtoshing :P I chose to install yosemite using unibeast. So I installed vmware with os x 10.8 to make my unibeast usb drive. everything went smooth and successful until I booted with the unibeast...

To begin, here is my build: Here are full specs: Motherboard: GA-Z77X-UP5-TH Processor: Intel i7 3770 Ivy Bridge GPU: nVidia GeForce GTX 660 3 GB (currently removed) Boot Drive: Samsung 840 PRO (dual boot 10.8.4 and Windows 7) The system works flawlessly but only if I am running onboard...

Hello people! My system: Type: Desktop Motherboard: Asus P8H61-M LX3 R2.0 CPU: Intel i3 3.4MHz RAM: 4GB DDR3 VGA: GeForce 9800 GT I managed to install OS X Yosemite 10.10.1 (14B25) following the tutorial suggested here on the site (UniBeast: Install OS X Yosemite on Any Supported...

I had sucess installing Snow Leopard, Lion, Mountain Lion and Mavericks, but I'm having issues with Yosemite. With Mavericks, I used UniBeast method, with these Boot flags for installation: GraphicsEnabler=Yes, PCIRootUID=1, PCIRootUID=0, and npci=0x3000, and these for post installation...

Hi, I found a handful posts with the same problem, but no solution posted anywhere. My new monitor works great on the Displayport with a 4k resolution if coming from power-down, the resolution is recognized (audio not working yet, but I know there is a thread about HDMI audio I need to go...

So I built the hackintosh and turned it on for the first time, went to the BIOS screen, changed some settings, saved and quit, and now every time I turn the computer on it's not sending a signal to the monitor...What do I do? I followed the settings of Mike7060 for the GA-Z87m-D3H, as he has the...

Sup Everyone, For the past couple of days i've been trying to properly install osx mavericks on my hackintosh without any success. I'm not a noob when it comes to this site i've had osx installed on my laptops since the os x leopard days. My current machine has a Z77-DS3H MB with an i5...

Hi, This is my first post, please be patient :) ABSTRACT Once executed MultiBeast, at startup a BenQ 23'' monitor (V2320H) connected via DVI loses signal after the Apple logo. If I replace it with a Apple Cinema Display 23'' also through DVI (A1082), I can login and the system is working...

I managed to get the installation done using a GTS450, but I would prefer if possible to use my GTX760, since it is a much better card and this is a duel boot setup. The issue however is that as soon as it gets done loading the kexts and "Int" pops up in the loader. The signal to the monitor...

I have a gtx670 connected via hdmi to my screen. Should i connect the hdmi straight to the motherboard instead? I tried GraphicsEnabled=Yes and it says the nvidia rom patch failed.

Gigabye ga-g31m-es2l rev2.0 (ich7), 2.33ghz intel core 2 duo, sparkle gt210 (nvidia) 1tb sata drive. My issue is with the gfx card. This card worked fine in both snow leopard and lion in all updates. I know it works in mountain lion because with the initial startup boot using the unibeast...

Hi everyone, This is my first hackintosh build, my spec is as follow, CPU: E3 1230 V2 Motherboard: Gigabyte Z77 UD5H (F14 Bios) Graphics Card: Gainward GTX580 I have followed the guide using unibeast created a mountain lion installation usb, however when I boot with it, I could not...