no signal

  1. Marcell278

    Monitor gets disconnected

    Upon 3 weeks after finishing my Hackintosh, i've encountered an issue where the monitor randomly would get disconnected (i.e no signal). my specs are as follows: MacOS: Catalina 10.15.5 MOBO: MSI H310M PRO-M2 PLUS CPU: Intel Core i5 9400F GPU: Radeon RX580 RAM: G.Skill Ripjaws 3000MHz 8GB x2...
  2. 3DTOPO

    Solved> No Signal with Sapphire RX 580 Pulse

    I updated my X99 system from High Sierra to Catalina running a Nvidia 1060. The display worked fine in Catalina, but without graphics acceleration of course. When I found out that there are no Nvidia drivers for Catalina, I bought Tonymac's recommended Sapphire RX 580 Pulse. I thought I was...
  3. david1337

    Solved > High Sierra 10.13.6 (17G8037) MSI GTX 1050 NO SIGNAL

    Hi all, I recently installed Mac OS X High Sierra 10.13.6 (17G8037) on my desktop. For the past days I am trying to make NVIDIA Web drivers to work with my MSI GTX 1050 2GB. After the installation I run Multibeast and selected the UEFI installation WITH emulated nvram. I also selected the core...
  4. jailbre1ker

    Monitors „No signal“ randomly

    Hello. I’d like to describe the problem quickly. Sometimes my dual monitor setup simply goes to „No Signal“, but the OS seems to continue operating normally. Also if I restart them simply nothing happens anymore. Most often this happens when I simply insert a USB device in my front USB ports and...
  5. tous100

    hp prodek g3 i5 7500 hd630 PROBELEM HIBERNATION AND PILOTE

    MY PC hp prodek g3 i5 7500 hd630 install Mojave 10.14 all done good with config, plist hd630 but in Mac info system I have juste Intel HD Graphics 620 1536 Mo FAKE name mac MacBook Pro (13-inch, 2017, Two Thunderbolt 3 ports) but me I have desktop I change in clover ID platform and fake id no...
  6. SuperMilesio

    NO SIGNAL after gpu installation El Capitan

    so my hackontosh is running El Capitan 10.11.6 and works just fine. But when I tried installing my gpu, nvidia gtx 760, I get no signal to the monitor when booting up. The gpu itself is installed and it functions just fine, and when I plug the hdmi in to the motherboard, I get signal. I have...
  7. penguinOu

    uhd630 I got no signal with VGA if i didn't inject platform_id

    Hello everyone my english is poor I hope you guys can undenstand it. :D:D:D My monitor can work if i inject platform_id with 0x01660005 or 0x3e910000 but graphics memory only 3m. so i delect platform_id and put the Lilu.kext and IntelGraphicsFixup.kext and WhateverGreen.kext into...
  8. AnDenPrangerMitEuch

    Solved > DisplayPort not working after Mojave Update

    Hi, I upgraded my PC with an MSI RX 580 ARMOR Graphics Card (1xDVI, 2xHDMI, 2x DP) after Nvidia doesn't release a driver. The new Graphics Card worked fine in High Sierra, then I installed the update to Mojave.. Now I have a problem: I have four monitors connected (1 DVI, 2 HDMI and 1 DP) and...
  9. morbidown

    High Sierra no signal after clover update

    Hello, guys, I've a problem. I have a dual boot, High Sierra and Windows 10. Yesterday I updated the clover for no reason and I ended up having a problem. After the update my mac went unsigned on a black screen, but my window is working normally. What should I do? Thanks!
  10. DDahn

    I can only get a signal to my screen with HDMI connection (High Sierra)

    Hello everyone! I have a problem where my other screen that's connected to my graphics card won't get any signal, the screen is connected with a VGA-cable to a VGA-DVI-i adapter into my DVI-I slot on my graphics card. The other screen works but that one is connected with an HDMI-cable into the...
  11. Dumbledore

    No Signal After Installing High Sierra

    Hello I have installed Mac OS High Sierra on my 250Gb SSD The setup went pretty well Then I installed the NVIDIA Web Drivers and rebooted my computer However now I have absolutely no signal coming out of my computer, I can't even see the ASRock startup screen :cry: My screen works just fine...
  12. coolharoon

    No signal after half way loading!

    Hi everyone, I am facing a wierd problem with my Hackintosh High Sierra 10.13.2 which is running on MSI Nvidia 1050 Ti OC 4gb and i7 7700k with Gigabyte b250 motherboard. While booting, the Apple bootloader loads half way and then my LG 20 inch shows no signal and goes into power saving mode...
  13. psyvirgin

    Nvidia 1060 HDMI connection no signal

    Hi everyone. I have a problem about HDMI connection. My desktop hardware configuration are: CPU I5-4590 Motherboard Asus B85-PLUS R2.0 Discrete Graphic: Colorful Nvidia 960 2G System: macos high sierra 10.13.3 Ok. I have installed it with my idle monitor 19'.and connected VGA to DP to discrete...
  14. Vibering

    Clover Boot Menu in an Infinite Loop

    Hey, In advance, sorry for my english. ;) I'm having an issue, quite annoying, the macOS High Sierra (10.13) was successfully installed, however, when I'm booting, I just have a black screen, no signal, and a reboot... I saw on this website some arguments to put into Clover Boot Menu, I just...
  15. UAMike

    Unable to wake from sleep with HDMI

    I am unable to properly wake from sleep when my display is plugged in via HDMI. There are two situations that will occur when I leave the computer unattended for long periods of time: 1. I will come back to my computer to find it's asleep and waking it will lead to 'no signal' OR 2. I will...
  16. motionworks

    2 x GTX 1080 Pascal = No Clover Boot Menu

    Hello There, I have just installed High Sierra (17C205) to my Hack successfully. But I have an issue.I Ihave used The Perfect Customac Pro - macOS High Sierra 10.13 on X99 - Full Success guide. I have 2 x GTX 1080 Pascal GPU (MSI Gaming X +) I fixed my GPU with AGDPfix (Black Screen +...
  17. julienscherliss

    [Solved] Hackintosh won't boot and ports have stopped working

    I recently updated to Sierra, last night I left my computer on and today when I turned on my monitors my computer was on but there was no picture, it also appeared that my usb devices that were connected - keyboard and harddrives - were recieving some power but not working, the harddrives were...
  18. jarryson

    R7 350: Screen become no signal after fake id 68101002

    R7 350: 0x66101002 If I modify AMD7000Controller.kext and AMDRadeonX4000.kext, replace 68101002 to 66101002, R7 350 works fine. But screen turn no signal (boot time around half of boot slider) if I fake id followed Radeon Compatibility Guide - ATI/AMD Graphics Cards: FakeID / ATI =...
  19. Pablosm99

    Can’t boot without nv_disable=1 on HDMI monitor (Sierra)

    Recently I’ve changed my monitor from a VGA to a new HDMI. With the VGA all worked fine. I tried to boot with the new monitor but after the Apple logo (or verbose mode) the signal ends. Then I’m able to boot with the nv_disable. No Nvidia Graphics Injected I would appreciate a lot some help...
  20. Elias1995ish

    So signal with Gtx 980Ti on Sierra 10.12.6

    Hey guys so I finally assembled my build here's the specs : Msi B250M gaming pro motherboard. Intel Core i7 7700 16 gb of hyperX fury DDR4 2400mhz ram Msi geforce gtx980Ti 6gb GDDR5 The problem is that everything installs just fine but when I install the latest web drivers I get no signal...
Top