Per the subject title, I've just done a fresh install of High Sierra and am having trouble getting second monitor running. The monitor is a WACOM DTH-2420 (4K display) which has USB 3.0 connection for touch-screen operation. It is connected on DisplayPort cable from GTX-670 along with HDMI...
Hello! So I have an old hackintosh with a GA-Z77X-UD5H motherboard for which I want to upgrade the graphics card... and separately I'm planning my own first hackintosh build with an Asus Prime Z490-A. I want to put both on Big Sur.
I have never bought a GPU before, my old hackintosh was built...
I'm going through change, I previously owned a 680Ti that then became a 980Ti and now have a chance of having an EVGA 1080Ti been put into my system. Any issues with this sort of set up?
I've looked around and don't seem to have found much on my mobo connected to a 1080 Ti so...
I've been building Hackintoshs for last couple of years (since mountain lion) and haven't run into a whole lot of trouble. I was able to get El Capitan running on a work Hackintosh. However, doing a fresh install of El Capitan on a home machine has been rough for some reason, maybe...
Unfortunately I got a problem with my hackintosh since I upgraded to Yosemite.
My Mavericks installation was working perfectly (except iMessage). Sleep, USB3 etc was all good. I used this guide a while back...
Title says it all.
Updated from ML to Mavericks a couple months ago. Everything has been working fine until yesterday.
Playing music on Spotify this problem arises, but then if I do something else like watch a Youtube video then the sound comes back suddenly.
I don't remember the Audio...
Just a post for anyone struggling with the Atheros (vs Intel) ethernet on the Gigabyte GA-Z77X-UD5H. I found the driver included in latest Yosemite Multibeast for the Atheros ethernet did not work after a clean install, so I reverted to using the driver from Mavericks (Shailua's...
I'm having trouble getting a fresh Yosemite installation to complete successfully. I'm following the unibeast guide to the letter, and when i get to Step4 #7 (the installation) i get the error "OS X could not be installed on your computer" "Request failed to initialize" "Quit the installer to...
This post is to document my findings/experience which may help others (or most likely remind me, as I cannot imagine anyone else interested and it assumes knowledge of linux) in trying to get my hackintosh to handle multiple operating systems and a large hard drive.
My setup: ga-z77x-ud5h...
I read lots about the advantages of clover, but is there anything chimera can do that is impossible for clover?
I have a specific problem which is getting clover to boot my rather dated linux partition - something chimera can do - but wondered more generally?
Thanks to the fantastic guide...
Trouble Booting into Mavericks + My Install So Far GA-Z77X-UD5H | i7 3770 | GTX570 - UPDATE SUCCESS!
I have been attempting to install Mavericks on my machine. I've had a Hackintosh for 2 years now, but it was built by a friend - this is my first time attempting an upgrade. My setup is...
I'd previously been using a wifi card, but after moving the computer, I need to hard wire over ethernet. I'm using ALXEthernet.kext 1.0.2 with no issues except when transferring a large file from my Hackintosh over the network to a PC. The transfers over wifi were fine, although slow. The...
Made a Thread for GA-Z77X-UD5H updating to mavericks.
Mavericks is still downloading for me currently. Has anyone had a successful instal and what did you do use for multibeast? Are there any problems anyone is having with it?
Well, anyway - where to begin with?
I am trying to finalize my Hackintosh properly - without success so far. Hence, I am writing this post to ask for your help...
So: I have:
- MacOSX 10.8.4
- Sapphire ATI Radeon VAPOR-X HD 7970
- Gigabyte GA-Z77X-UD5H
What is working:
I am a little confused after reading several guides about dual booting windows 8 with mountain lion. I am planning to use the ga-z77x-ud5h mobo.
- Am I able to use chimera bootloader with this mobo to select which os I want to boot? Ie// turning on the computer and being presented...
This is my first build and it's been going well but I'm hung up on the infamous boot0: error after using multibeast.
I tried using the official guide: http://www.tonymacx86.com/25-boot0-error-official-guide.html
I got hung up on trying to unmount the disk with ML on it. When I...
I was searching for a guide to install the new nVidia graphics card GTX770 with 4GB of DDR5 RAM and I found informations in various threads.
So, to keep it more comfortable for you to install/upgrade I created this summary.
My start configuration was: GA-Z77X-UD5H - i7 3770K - Intel HD4000 -...
Intel Core i5-3570K
16GB 1600Mhz DDR3 (2x8 GB)
Corsair Carbide 500R
Corsair 650 Watt Modular
SATA 6Gb/s 240GB SSD
SATA 6Gb/s 3 TB HDD
After my build, turned on the power to get an Error 51 on my MOBO i.e. memory installation...
I'm new into this and I'm trying to build my first CustoMac but I have some trouble with the installation.
My hardware is:
Motherboard: Gygabite Intel GA-Z77X-UD5H
Proccesor: Intel Core i7 3770
Memory: Corsair 2x8GB DDR3 1600
SSD: Samsung 840 Pro 128GB
Power: Corsair PSU TX650M...