- Joined
- Jul 24, 2013
- Messages
- 5
- Motherboard
- GA-Z77X-UD5H
- CPU
- i5-3570K
- Mac
- Classic Mac
- Mobile Phone
CPU-
Intel Core i5-3570K
Motherboard-
GA-Z77X-UD5H
RAM-
16GB 1600Mhz DDR3 (2x8 GB)
Case-
Corsair Carbide 500R
PSU-
Corsair 650 Watt Modular
Storage-
SATA 6Gb/s 240GB SSD
SATA 6Gb/s 3 TB HDD
After my build, turned on the power to get an Error 51 on my MOBO i.e. memory installation error occurred, stuck in a boot loop, and no signal to my monitor. I had a stick in the 1 and 3 DDR ports. Tried to switch slots and boot out of slots 2 and 4 to the same results. I tried the same thing, but with one stick in each port one by one. Received the same error in ports 1,2, and 3, however port 4 took me to the BIOS screen. Is this safe to assume that this is a defective motherboard? I do not really want to continue this build until I am capable of using both sticks of RAM and being capable of a future upgrade.
After my build, turned on the power to get an Error 51 on my MOBO i.e. memory installation error occurred, stuck in a boot loop, and no signal to my monitor. I had a stick in the 1 and 3 DDR ports. Tried to switch slots and boot out of slots 2 and 4 to the same results. I tried the same thing, but with one stick in each port one by one. Received the same error in ports 1,2, and 3, however port 4 took me to the BIOS screen. Is this safe to assume that this is a defective motherboard? I do not really want to continue this build until I am capable of using both sticks of RAM and being capable of a future upgrade.