Intel Core i5-3570K
16GB 1600Mhz DDR3 (2x8 GB)
Corsair Carbide 500R
Corsair 650 Watt Modular
SATA 6Gb/s 240GB SSD
SATA 6Gb/s 3 TB HDD
After my build, turned on the power to get an Error 51 on my MOBO i.e. memory installation...
I'm new into this and I'm trying to build my first CustoMac but I have some trouble with the installation.
My hardware is:
Motherboard: Gygabite Intel GA-Z77X-UD5H
Proccesor: Intel Core i7 3770
Memory: Corsair 2x8GB DDR3 1600
SSD: Samsung 840 Pro 128GB
Power: Corsair PSU TX650M...
pros and cons???? whats the difference? appart from one has two thunderbolt ans is about £50 more expensive :eh:
haha any advice would be great as this is my first build. thanks guys
if you can answer on my main build thread that would be awesome as i have no continued there...
So this is my second Hackintosh. My first one was always having issues and never quite compatible. So I decide it was time to upgrade. I did a little reading and decided on the Gigabyte GA-Z77X-UD5H and the i5 3570k. (i also bought the Geforce GTX 660Ti but I think Im having warranty...
Hello to everyone,
By now I have successfully installed Mountain lion in my system;
Gigabyte GeForce 670
I even managed to install the chameleon bootloader which works well
Now I am trying to intall windows 7 in another hard drive, so I changed the boot ordet in the...
I am building my CustoMac and I am wondering which CPU cooler is better: Corsair H60 or Thermaltake Performer?
I will use a Intel Core i7-3770K CPU and a GIGABYTE GA-Z77X-UD5H in a Corsair Carbide 500r.
Thank you very much! :)
I just bought the following parts --
MSI GTX 670 Power Edition
Samsung 840 Pro 128GB SSD
Kingston HyperX Beast 8GB DDR3 RAM
Corsair HX750 Power Supply
Cooler Master HAF 912 Mid-tower ATX Case
Dell S2240L 21.5" LED IPS-panel Monitor
I am yet to buy the processor and I'm...
Highpoint's web support requires having purchased the product and registering the serial number, and I have not yet purchased the 2720. There is no other contact or support channel available through their site that I can find. Likewise, I have Googled a bit and searched the forums here without...
This is for the GA-Z77X-UD5H bios, but should work on other motherboards with the same BIOS feature settings.
Enable USB 3.0 BIOS settings:
1) XHCI = Smart Auto
2) XHCI Pre-Boot = Enabled
3) EHCI Handoff = Enabled
4) XHCI Hand-off = Enabled
This guide helps you to install OS X 10.8.3 on a Gigabyte Z77X-UD5H mobo with an Intel Core i7-3770.
Note: before beginning it's recommended to remove the nVidia Graphic card(s) and use the on-board graphics.
Create a bootable USB-stick with the apple installation on it. Buy Apple...
So I built my first hackintosh using tony's Custo- MAC pro build I am using the 670 for my graphics. My mobo is the ga-z77x-ud5h. Now both the green port and the headphone port are working just dandy when I connect my headphones or a separate speaker system. However when I connect my...
I had some hardware issues with my old box, and decided that it was time to upgrade. I'm looking at picking up a Gigabyte GA-Z77X-UD5H and Intel i5-3570K, and re-use the following components for the time being:
- Xigmatek Gaia cooler (should suffice for a bit of OC).
- 8 GiB (4x2) G.Skill DDR3...
I started building my own PC in order to run OS X, thanks to tonymac. I strictly followed february's Buyers guide and bought the following configuration on Amazon.fr :
- Corsair Carbide 500R Boîtiers PC ATX Acier Noir
- Corsair Enthusiast Series Modular TX650M Alimentation pour PC...
Troubles with LAN and Sound on UD5H motherboard help!!!
Hi, I'm a noob on hackintosh and I've got some issues with the Gigabyte GA-Z77X-UD5H, the mobo has the P8 bios update, in multi beast I selected the easybeast and only ALC898 without DSDT. In the first reboot I lost the lan conection and...
Hey guys, I'm totally new here and I'm building my first Hackintosh from scratch.
Mother Board: ga-z77x-ud5h
HDD: 1Tb Western Digital Sata
Ram: Using 1 stick of 4Gb ram for install
CPU: Intel i7 3770 (SandyBridge)
GPU: None (will this effect me?)
I managed to use iBoot Legacy to...
i'm up to build a stable hackintosh to replace my old mc pro. main purpose is photoshop work, no games at all, no windows boot. budget is not a big issue, but i don't need overkill parts. stability is a must!
i am reading all the guides and forums here in relation with the hardware i'm...
OK, I've successfully loaded Snow Leopard 10.6.8 onto my system with the ultimate goal of getting Mountain Lion installed. Here is the run down...
First off, I bought the following hardware:
CPU: Intel Core i7-3770K 3.5GHz Quad-Core Processor
Motherboard: Gigabyte GA-Z77X-UD5H ATX LGA1155...
I'm elbow-deep in my build here, and have hit a brick wall.
GA-Z77X-UD5H rev 1.1
4GB x 2 Corsair Vengeance DDR3 1600 / 12800
Corsair 600W PSU
Intel 520 SSD
I have everything mounted in the case, cables attached. With the PSU's power switch flicked, I get the amber...
I hope someone could help out as I am having a problem with my hacintosh, I have the following setup GTX670 GA-Z77X-UD5H running ML and things are great, however I am now trying to add a second screen to the dvi port (the one next to the HDMI not the bottom one as i don't have that...
I'm pretty sure I know what all I need to enable in Multibeast but if I can get some reassurance that would be great.
Intel Core i7 3770K
EVGA GeForce gtx680 superclocked edition
LG Blu-Ray Drive UH12NS29
The biggest question I have is for the...