The .dsl file can be easily modified and compiled. That is attached at the end of post #1. The other form factors don't have a mini PCIe slot like the USFF does. So that will require looking at the ioreg to map that properly.Is there a file for USB setup for the USFF on here? Or does the standard one work?
I thought somebody had done this but Ive looked on the other threads and can't see the file.The .dsl file can be easily modified and compiled. That is attached at the end of post #1. The other form factors don't have a mini PCIe slot like the USFF does. So that will require looking at the ioreg to map that properly.
Oh, okay, followed the instructions of this guide, and so far everything's worked fine. Ethernet, hdmi, bluetooth.usb...
yeah, that really changed then. i got a full-size pcie slot
@nicksoph.
Oh, okay, followed the instructions of this guide, and so far everything's worked fine. Ethernet, hdmi, bluetooth.usb...
I assume the subject I have is similar to the one discussed here?
Broadcom WiFi/Bluetooth [Guide]
Hello all. I have purchased and installed this card: https://www.amazon.com/gp/product/B08428ZJV9/?tag=tonymacx86com-20 Currently it shows up as a usb device, but the bluetooth says "Not Available." I know the internal usb port is active as I had a different pcie bluetooth card in there...www.tonymacx86.com
Then I'll have to look into it more closely.
I am in particular interested in how did you get the bluetooth to work on the card on USFF as you mentioned only WIFI works initially and BT was not recognized ?
Do you have the BrcmPatchRam kext installed ? Should be where you keep all the other kexts. Either in /L/E or in /Clover/kexts/other folder. I've not used the Wifi/BT card you have but people that have also use a few other kexts along with BPR to make it work. I'll try to figure out what they are.the port is already set to internal.
otherwise it is 2x 4 usb 3 port and 2x usb 2 port. so the result is correct.
do I have to do something about it now, or does the usb-port allocation fit?
Do you have the BrcmPatchRam kext installed ? Should be where you keep all the other kexts. Either in /L/E or in /Clover/kexts/other folder. I've not used the Wifi/BT card you have but people that have also use a few other kexts along with BPR to make it work. I'll try to figure out what they are.
BrcmPatchRAM - Upload firmware into Broadcom Bluetooth USB devices
BrcmPatchRAM - 3rd party Broadcom Bluetooth USB devices on OS X Introduction A number of Broadcom Bluetooth USB devices do not have a persistent firmware. These devices are only upgradable temporarily, called PatchRAM. Everytime the computer reboots or resumes from sleep, the firmware in the...www.tonymacx86.com