RehabMan
Moderator
- Joined
- May 2, 2012
- Messages
- 181,008
- Motherboard
- Intel DH67BL
- CPU
- i7-2600K
- Graphics
- HD 3000
- Mac
- Mobile Phone
Why are you mentioning layout-id=28?
The ioreg you attached in post #460 shows layout-id=28 injected on HDEF.
Why are you mentioning layout-id=28?
The ioreg you attached in post #460 shows layout-id=28 injected on HDEF.
Audio
For audio i created a audio injector "ALC3232.kext" which i patched on my own from my CodecDump from Ubuntu.
Audio is implement via SSDT-HDEF & SSDT-HDAU + config.plist = Kernel and Kext Patches
In my guide we will use LayoutID28 which is already injected on SSDT-HDEF & SSDT-HDAU - (for MiniDP Audio)
This kext should work for all the other Thinkpad Laptops that do have ALC3232 (ALC292) Audio Codec.
For this codec, it's required to use ALCplugFix in order to fix External Mic "Line-In".
What it does, it does automatically detect when you plug in headphones and does switch to the required verb for it.
I also built a CustomSSDT for CodecCommander "SSDT-ALC3232" which is required for fixing issues after wake from sleep.
Audio is 100% working, All Inputs,Outputs & Even after wake from sleep.
From the OP:
As I think I showed above, ALC3232.kext does use layout-id=28.
As I said above, I believe I did insure that ALC3232.kext is coded for layout-id=28.I was simply answering your question which was asking me why I was asking about layout-id=28.
My suggestion was that you actually look at the content of ALC3232.kext to insure it is coded for layout-id=28.
Note: That will need to change for Mojave as it does not support layout-id=28.
As I said above, I believe I did insure that ALC3232.kext is coded for layout-id=28.
See post 475.
In an attempt to understand a course of action.Great. I don't know why you were asking me why I was asking about it though.
Hi @RehabManMacs use proprietary Apple GMUX. The software for GMUX not compatible with the method used on non-Apple PCs.
No "Problem Reporting" files attached.Hi @RehabMan
I just bought a 4k monitor. Only 4k@30hz on hackintosh with miniDP 1.2. I wonder is it possible that enable 4k@60 with HD4600?
No "Problem Reporting" files attached.
Read FAQ, "Problem Reporting" again. Carefully. Attach all requested files/output.
https://www.tonymacx86.com/threads/faq-read-first-laptop-frequent-questions.164990/
Use the gen_debug.sh tool mentioned in the FAQ, that way it is less likely you'll omit something.
The monitor is 27' 4k but it shows wrong --
View attachment 356767
only 30hz and gray (can't change)
View attachment 356768
I attach the problem report file.