- Joined
- Feb 28, 2016
- Messages
- 159
- Motherboard
- Gigabyte GA H270N WiFi
- CPU
- i5-7600
- Graphics
- HD 630
- Mac
- Mobile Phone
Thanks buddy.this is a great guide with full of details . thanks for your work.
i would try to get all my parts this week
Thanks buddy.this is a great guide with full of details . thanks for your work.
i would try to get all my parts this week
Apply NVMe patch. Here is the link. in installation section, you can find NVMe Drive Dig deep there.I seem to get stuck on a spinning rainbow wheel about 90% through the installer loading bar about 7 Minutes into booting. Verbose shows an issue loading AHCPI? These are all set per the guide. Could it be that I have an M2. SSD?
Use the latest version of Voodoo HDA, install it sound will work perfectly.Hi,
First of all thanks a lot for the tutorial, this is the first time that I tried to install sierra after failure and failure, now my desktop is working fine
I could make the USB 3.0 work and the sound I have the GA-Z270M-DS3H, I've followed all the steps if there is anything missing could you help on this.
And The sound is also not detected
Regards.
Follow The USB section there you can find all the instructions read it carefully.Thanks a lot, for the USB 3 do you have an idea why it's not working if you need anything that I can provide print screen etc
Still seems to be getting stuck at the same place even after following for NVME instructions. Decided to use a standard SATA SSD instead, do you have a copy of your DSDT.aml that you used for install?