- Joined
- May 25, 2017
- Messages
- 2
- Motherboard
- GA-H170N-WIFI
- CPU
- i5 6500
- Graphics
- HD Graphics 530
- Mac
- Mobile Phone
In order to help you help me, here are some details:Same problem here. All USB ports works for USB2 devices, or when using USB3 devices with USB2 cable, but the USB3 devices are not working (Ex: an HD enclosure USB3 will not mount).
One error I did was initially, my Multibeast install did not included checking the box of the "Increase Max Port Limit 100 Series". So I did install it on top, without success. I have also tried a bunch of things documented in this thread without success. I probably think the answer is somewhere buried in this 27 pages this thread has become but can you please help me?
Thank you.
I have a H170N-WIFI, no Wifi/BT since I use Ethernet (I have removed the stock chip)
Processor is a i5-6500
I use onboard Video and audio
Here is the content of my EFI partition, including the config.plist
https://www.dropbox.com/s/xdho703tjspxig2/EFI.zip?dl=0
Finally, here is the Multibeast settings file upon install of system.
https://www.dropbox.com/s/zs7m9v2vz69vdd2/MultiBeast settings 2017-06-19.mb?dl=0
Can you please help me figure out what I did wrong to make the USB3 behave as USB2?