I was using Mojave 10.14.2 on my old build for sometime.
Recently I changed my SSD and did a clean installation of Mojave 10.14.6 .
Everything works fine except...
I'm a newbie when it's about hackintosh, I try to build a config to be able to use capture one or adobe lightroom in a confortable way.
My macbook pro 13 (early 2013) is not anymore a beast.
After a successful test with a nuc7 to build an hackintosh using the perfect tools and scripts from...
I recently switched over to the ASUS Strix RX Vega 64 and am having a strange time with getting Mojave to boot. I have two installation of Mojave. One a 1TB HDD and another on a Samsung Evo 960 M.2 SSD. Both installations went perfectly and I managed to get everything setup (Kexts, config)...
I've been struggling to install High Sierra on my "old" machine.
Arock H170 Performance
2x SSD SATA 3 (Samsung and Crucial)
Bios changes (after reset to default):
XHCI Handoff: enabled
Serial Port: Disabled
Secure Boot: Disabled...
motherboard asus h170m-e d3, cpu skylake i3-6100, intel hd530 graphics, high sierra unibeast 8.3.2 & multibeast 10.2.0
system appears to sleep fine i.e. disk and fans stop & power led blinks. when I press any key disk and fans restart and then it reboots. also when I type "pmset -g everything"...
my latop book use hack bios
hm170 + i3 8100
use all patch but always show 7mb
what can i do?
➜ CLOVER ls ACPI/patched
SSDT-DISGPU.aml SSDT-PNLF.aml SSDT-pr.aml
➜ CLOVER ls kexts/Other/
Hi, i've just installed Sierra and it works good. When I turn off the PC and I turn it on the day after it don't start and it blocks when the Apple logo and the progressive bar appear. What could be the problem?
Poles Build: Gigabyte GA-H170-D3H - i3-6100 - HD 530
The Build by poles posted Aug 8, 2017 at 4:14 PM
Ga-h170-d3h-about-mac by poles posted Aug 8, 2017 at 5:53 PM
Intel i3-6100 3.7GHz Sky Lake...
I'm unable to find the audio & network codec name of Gigabyte GA-H170-D3H in my motherboard. I have looked into their official site -> http://www.gigabyte.us/Motherboard/GA-H170-D3H-rev-10#ov . But nothing was there. Can anyone help me out?
Thanks in advance.
I will be purchasing this pre-built desktop, which comes with the following specs:
Intel® Core™ i7-Prozessor der 7. Generation
DDR4-2133 SDRAM, 16 GB (2 x 8 GB)
Detailed specs can be seen here...
I'm looking to experiment with a Hackintosh. I already have a few custom-built Windows PCs but I'm aware that there are some strict hardware requirements for building a Hackintosh. I just wanta basic build to try out the whole Hackintosh experience and, hopefully, use it as an alternate...
First time poster here - I've searched all around the forums but considering the time difference between the hardware and OS, I guess no one else has run into this issue.
Does anyone have any experience/advice with running Mavericks on a GA-H170N build...
I've finished my hack. Everything works good but no Audio device is find.
I've already try with the guide in this forum but nothing work.
I've install voodooHDA but when I try to launch it goes in an error No VoodooHDA Devices Detected.
can anybody help me?
- i5 6500...
Hello! I can't get my El Capitan build to work with dual monitors (one with DVI, the other with HDMI or both with HDMI).
I can boot and see the boot menu with both monitors but when OS X starts, one screen goes black and the other has fuzzy graphics and I am able to see only the top bar...
This thread is a deviation from ammulder's guide - El Capitan on the Skylake H170N-WIFI - focussing only on installing Sierra on this build.
Updating to MacOS 10.12 went smoothly by following tonymacx86's Direct Update Guide. After the update most things worked properly, including audio (with...
Finally I finalised my hackintosh using a Asus H170M-Plus, Intel i7 and 16 GB memory and SSD250 + 1TB HHD set as a fusion drive.
Everything worked fine, until a hook a Monitor Samsung UE590 4K, what happens now is that the monitor just go black during the apple logo load. If I hook an...
I got El Capitan up and running with audio and internet but still struggling to get the optimum acceleration out of my Intel HD Graphics chip in the mother board. Videos from SSD are not playing and I am getting flickering display on flash based web pages.
I don't have any graphics card, is...
Hi tonymacx86 forums!
I've read this thread about Skylake build and thats what I've made:
CPU: Core i5-6600K
MOBO: Gigabyte GA-H170-D3H
GPU: Gigabyte GTX 980 G1 Gaming
RAM: Kingston HyperX Fury 2x8GB 2133MHz CL14
HDD: WD Blue 1TB
CPU Cooler: Be Quiet! Dark Rock 3
Case: NZXT H440
And I would...
I'm having issues getting my new skylake build to work with the GTX 970
System Type: 17,1
El Capitan 10.11.5
nvidia 346.03.10f02 driver
Motherboard: Gigabyte GA-H170M-DS3H
Memory: 16gb Crucial CT2K8G4DFD8213 pair
CPU: Intel Core I7-6700 3.4ghz
Graphics: EVGA GeForce GTX 970...