View attachment 255556
5.) When Clover Installation completes, download and copy the "config.plist" file and "/kexts/10.12/" directory of ptzulu
(attached to this post) into the "CLOVER" directory of the EFI partition of your USB installation medium. Note that there is a later version of
@RehabMan 's
IntelmausiEthernet.kext (
also attached to my post), which however does change the Ethernet-throughput (thanks to
@musikprylar for his advice). Furthermore, download and copy
nickwoodham's "OsxAptioFix2Drv-free2000.efi" file (attached to this post) into the /EFI/CLOVER/Drivers64UEFI/ directory of your USB installation medium (thanks to
@BoomR,
@P1LGRIM and
@Thireus for the info). Delete any other "OsxAptioFix*Drv**.efi" files if previously installed. OS X 10.11.4 and greater allocates memory above the memory space which is covered by the AptioFixDrv memory relocation, while OS X 10.11.3 and earlier tries to allocate memory in the low memory range that is already occupied. "OsxAptioFix2Drv-xx.efi" frees the first 512MB of fragmented memory which gives ample room for the MacOS kernel and kernel cache and applies memory map fixes which allow MacOS to communicate with your installed hardware. Without the "OsxAptioFix2Drv-xx.efi" fix, your system might become unstable (random reboots). Finally, download the latest Version of the
Clover Configurator and open ptzulu's "config.plist" file in the /EFI/CLOVER/ directory on the EFI-Paritition of your USB installation medium. Verify that in "Kernel and Kext Patches" you use FakeCPUID 0x040674 (Broadwell-E). In case you try my guide with a Haswell-E CPU, use FakeCPUID 0x0306F0.