- Joined
- Apr 23, 2019
- Messages
- 22
- Motherboard
- Gigabyte GA-Z97X-UD3H - F8
- CPU
- i7-4790
- Graphics
- HD4600
- Mac
All right. So I've made much progress. I upgraded from OC 0.77 to 0.88. I received a Fenvi T919 card and got that working as well. I mapped all my USB ports using USBMap.
Till now I've been running on the internal graphics, but I just received my RX-560 GPU.
Edited below to answer my own questions. I got the eGPU to work by making the changes below (see & below).
What do I have to change in OpenCore to get the new GPU to work?
Also what BIOS settings should I change (changed BIOS graphics from IGFX to PCI), can I keep both the internal and external GPUs enabled at the same time or should I set the BIOS to external only?
Any suggestions @Edhawk (since you are so knowledgeable )?
Till now I've been running on the internal graphics, but I just received my RX-560 GPU.
Edited below to answer my own questions. I got the eGPU to work by making the changes below (see & below).
What do I have to change in OpenCore to get the new GPU to work?
- Do I have to remove/change the PciRoot(0x0)/Pci(0x2,0x0) section in DeviceProperties, or do I keep it?
- Do I keep WhateverGreen or remove it? The OpenCore GPU guide suggests I should keep it.
- Any other KExts to add remove?
- Any other OpenCore changes required? (I only had to remove --wegnoegpu)
Also what BIOS settings should I change (changed BIOS graphics from IGFX to PCI), can I keep both the internal and external GPUs enabled at the same time or should I set the BIOS to external only?
Any suggestions @Edhawk (since you are so knowledgeable )?
Last edited: