- Joined
- Nov 19, 2019
- Messages
- 51
- Motherboard
- Gigabyte Z390 Designare
- CPU
- i9-9900K
- Graphics
- RX 5700 XT
@hamzaThe easy solution, of course, is to just shut down the PC overnight and during other non-use times.
@hamzaThe easy solution, of course, is to just shut down the PC overnight and during other non-use times.
@hamzab @CaseySJThe easy solution, of course, is to just shut down the PC overnight and during other non-use times.
Sure, Siri is enabled and I use it occasionally. My home is full of Amazon Echo devices, however...Nothing with your post but are you using Siri on your Hackintosh?
Ah, good observation. Next month when OpenCore 0.6.4 is released I'll add the conditional to every SSDT.In the past I have had issues with unknown devices showing in Device Manager. Looking at the path there indicates they came from SSDT mods.
UIAC was one of them that I had happen, so I modded all my SSDT at the time to do the Darwin conditional and that made sure those devices didn't show.
There were so many sleep-related posts earlier in this thread that it seemed we were all drowning in our sleep! So I created the Sleep Aid guide and vowed never to touch the subject again. But as Al Pacino stated in The Godfather, "Just when I thought I was out, they pull me back in."
based on 2 bad experiences with Migration Assistant (and I think others here have had bad experiences, as well) I would advise against using it. in the 2 cases it failed for me, the problem was that it copied some system files from the old system to the new one which of course corrupted the new system. This isn't supposed to happen but it did, twice, for me.
with the AirPods Pro or you have another mic?Sure, Siri is enabled and I use it occasionally. My home is full of Amazon Echo devices, however...
The OpenCore 0.6.3 EFI for Z390 Designare already contains that configuration.@CaseySJ
Magic Keyboard 2 isn't working in Open Canopy when its connected by USB.
The solution is to delete UsbKbexi driver and from config.plist
also be sure KeySupport is enabled in Input section
sorry I added it accidentally into config.plist with OCC Scan/Browse button...The OpenCore 0.6.3 EFI for Z390 Designare already contains that configuration.