- Joined
- Jun 24, 2020
- Messages
- 17
- Motherboard
- Gigabyte Z390 Designare
- CPU
- Intel i9900K
- Graphics
- Sapphire Radeon Vega 64 Nitro+
- Mac
Please perform a CMOS Reset by shorting the two pins as explained in Designare user's manual. Then configure BIOS parameters again starting with Save & Exit --> Load Optimized Defaults. This should reset the memory map and let you get past that error.
@CaseySJ So after performing the CMOS Reset, I should configure bios by starting with Save & Exit --> Load Optimized Defaults, then reboot to bios and configure settings again from the original guide (Or just take a picture of my bios settings before Reset then reconfigure after)? Just want to confirm
Last edited: